Question about Linksys Wireless-G WRT54G Router

1 Answer

Cannot connect lap top or printer wireless and also connect to the internet via AT&T motorola modem

Dell vostro 1700 lap top Vista Business OS AT&T DSL via Motorola modem Cannot connect via wireless system using linksys WRT54G router. also cannot connect new Canon wireless printer MP620. If DSL router is connecting to the internet then can not operate wireless thru the Linksys modem. If linksys router is connected then can not connect to the internet. Yet with same laptop and same router in my vacation home where I connect to the internet via sattelite Ihave no problem setting up my lap top to operate wirelessly. So at present loction the lap top is hardwired to both the internet connection on the ATT DSL modem and hard wired to my wireless printer. can any one help. I did try cloning the laptop IP address into the linksys modem but that did not work either

Posted by on

  • 2 more comments 
  • Anonymous Apr 12, 2009

    I am not certain what you mean. I set up the linksys router using the disc supplied but once all directions are followed and I disconnect the yellopw ethernet cable from the lap top I can no longer connect to the internet There is an X showing on the network map between the router icon and the web icon

  • Anonymous Apr 12, 2009

    i have dsl and that seems to be the problem in a nutshell so sounds like I have to find out how to configure the roter with PPOe. Is that correct?

  • JDTec
    JDTec May 11, 2010

    You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:
    Shutdown your PC. Unplug the power from the router and the cable modem.
    Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.

  • JDTec
    JDTec May 11, 2010

    Have you set the Linksys router to PPoPE and type in your username and password?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Linksys Master
  • 4,338 Answers

Yes. Here is Linksys' page on how to:

http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3687

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Posted on Apr 12, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

BRIDGING MODEM AND ROUTER


Your firmware may not support bridge mode, try installing dd-wrt from http://dd-wrt.com/dd-wrtv3/index.php

Aug 19, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

Want to get on internet with my lap top via wireless what card do i need for the inspirion 8100


first of all you need to check with your internet provider to see what modem you can use. a wirless 802.11g card (the farthest range) if your provider has a wirless modem i would get it from them. and a wirless modem/router. i use bellsouth wirless dsl and bought the equipment from them. if you have a wirless modem/ router already then you just need the card and configure it.

Jul 26, 2009 | Dell Computers & Internet

1 Answer

Remote Assistance Firewall Issues


Use Crossloop. Each session is encrypted and doesn't require turning off firewalls in your routers. You will have to give it permission to run in Vista and XP, but it works and I've used it many times.

If this is what you're already using, go to their help page to resolve the problem.

Hope this helps.

Mar 24, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Need to redo wireless setup betw linksys & westell


You will need to assign a different ip address to the Westell modem - I am assuming that both the router & modem are using the same ip address 192.168.1.1? If that is the case, then assign 192.168.1.2 to the modem.

Mar 15, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Linksys WRT54G wireless router not compatible with Aztech modem?


Darvin, gotta love your ISP. Never fear......

if it isn't too much of a problem (knowing you have wireless setup done already), then do a factory reset on your router ** remember to copy the WEP Key if you have, or recall the PASS PHRASE so you won't have to reset all wireless devices ** Reset is located on back, you need a ball point pen to reach the reset switch.

Reset process: unplug, take ballpoint pen & insert into reset switch & plug unit back in. Sometimes tricky, but you should notice green light goes to yellow/orange upon resetting.

RESET or NOT - you want the Linksys set for ::

Connection Type - AUTOMATIC (for automatic discovery)
Router IP Address - 192.168.2.1

DCHP - ON, Addresses - 192.168.2.100 and allow 5-50 users
(for security, assign the number of DESKTOP + WIRELESS expected users +1, this way you don't get overrun without knowlege)

Take the cable from Aztech ETHERNET OUT to WAN on Linksys. (usually BLUE) (??) not 100% sure as I have the little silver pocket edition of the same Router. - power cycle (turn both DSL modem & Linksys off for 20 seconds. turn on DSL Modem, wait till it's about as ready as possible, turn on Linksys, should only take 20-30 seconds to power up & recognize.

VERIFY SETTINGS: access router - 192.168.2.1, goto STATUS. you should see IP Addressing, SubNet, DNS1 & DNS2 settings. If you do not, then you have no internet connection.

ALTERNATIVE,

Setup Linksys Router with COnnection Type: PPoE, you will need your ISP assigned ID & Password. Follow all other instructions properly.

If you still have problems, please contact me at 906-495-1707 or via Yahoo IM junodr@yahoo.com or through this website.
once

Jan 04, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

After successful instn of my linksys wireless router i cannot access to wireless online connection


Whenever you connect a different device to the cable/DSL modem the modem itself must be reset. Dont even waste a phone call to linksys. Its useless.

If you are using DSL depending on your ISP you may have to enter your account info into the router's PPoE section

Cable users should have the router set to "Obtain IP aadress automatically"

Use the reset button on the back of the router and start from scratch.
Unplug the cable/DSL modem power
Hook up your router WAN/Internet to the Cable/DSL modem Ethernet/LAN jack
Power on the Cable/DSL Modem first, wait about a minute, then power on the router.

Sep 25, 2008 | Linksys Wireless-G WRT54G Router

3 Answers

Wireless network broken, access to WRT54G & Motorola 2210-02 via http.. denied


I have att yahoo dsl which I installed about a year ago. The process required bridging the ADSL Modem (in my case a speedstream 4100) and accepting dynamic IP addresses and configuring PPPoE on the WAN side of my Linksys router. The ATT support person walked me through the entire process over the phone even though I was comfortable with making the Linksys configuration changes as I had to do the same in China without technical support. The modem configuration was no more difficult than the router configuration as it was performed from a web browser too. The biggest warning was that to reverse the modem change (if desired) required use of a reset button because the web interface was disabled as a result of the configuration change. My advice to you especially if you are willing to attach the Linksys router to the telco modem is to contact the ATT highspeed DSL support line and see if they will walk you through it like they walked me through it. Reviewing your Linksys User's Guide and understanding the configuration of that device would probably be appreciated by the ATT Support person as well as assuring you can access the Linksys router to configure it during the call.

Dec 08, 2007 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

440 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4367 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...