Question about GE Profile Spectra JGBP90 Gas Kitchen Range

Open Question

My GE Spectra Xl44 starts beeping every 15 minutes with a code that says it want to do a self cleaning in red it as a solid E7 and and a flashing green E9...how do i get this to stop other than getting up and pushing the clear button. And yes i have let it complete a self cleaning.

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
fridgetech

Craig Shelton

  • 473 Answers

SOURCE: ge spectra xl44 stove

Most likely the oven ignitor is bad or weak.  You can look at it and see how it compares to the broil ignitor.  If you see a whitish color on the ignitor and if it doesn't fully glow then it needs to be replaced. 

Posted on Oct 22, 2007

Ad
Master_Tech

Gary Davd

  • 770 Answers

SOURCE: ge spectra xl44

unit needs to cool down to release the latch assby

Posted on Jan 26, 2008

BNewberry

Bill Newberry

  • 93 Answers

SOURCE: Code F7 on my GE Spectra XL44

http://www.fixya.com/support/t120458-ge_profile_oven_ftp18_f7_code


Try reading this and see if it helps you any, thank you

Posted on May 16, 2008

Anonymous

  • 750 Answers

SOURCE: ge oven profile spectra xl44

Hello ,
Welcome to fixya.
I'm Huuum and happy to assist you,

You asked, is there anyway to bypass the oven lock or bypass the self cleaning mode to get oven working?

Why do you need to do this?

If the door lock is stuck in closed position and preventing you from using the range?
You may free this by following this procedure.

Threat it like an error code.

This can reset the system.
Turn the breaker off to cut the power for 5 minutes.
Then restart the breaker and try the range.

It's like rebooting your computer when its acting strange!
Usually it corrects most problems!.
Or they are sometimes just a glitch.

If this does not remedy the problem, then the lock switch itself is bad and if you think you can bypass it then you may as well change it. Same labor!!.
Let me know how it works out.

Huuum
Please remember to leave a rating.



Posted on Sep 25, 2008

Anonymous

  • 1 Answer

SOURCE: GE Spectra XL44 Gas Oven, flashing "Locked Door". Can't use oven or close door

I had the same problem happen tonight. I have an XL44 self-cleaning gas range. We unplugged it for several minutes and pressed 'cancel' a bunch of times--neither worked. We finally lucked out--opened the oven door and pressed a black button on the upper left side of the front of the oven. It turned out the flashing words and unlocked our door. Weird. There was nothing in the manual about this...

Posted on Dec 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a GE spectra xl44 stove model #jgbp28bea2ct, when I turn on the oven the clean light winks and the oven does not heat up. please help


Hi, Before you go working too hard to get you oven to go intothe self clean mode(self destruct)....check out this tip...

Self Cleaning Oven Problem


heatman101

" Wish I had read this first. I never would have used the self cleaningoption. Thanks for the info!!

Aug 16, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Fi keeps beeping yet control still operates everything normally on my ge xl44 gas range model JGBP26GEN..it started last nite. Ive tried resetting the circuit breaker and pressing the keys in many...


The F1 code can be 1 of 2 things. Try disconnecting the ribbon cable from the touch pad to the clock. Then reconnect power and if the code comes back with 32 seconds the eoc is bad. If it doesn't the touch pad is bad.

Jun 04, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Describe your GE Profile Spectra XL44 Oven


My GE Profile Convection Microwave Oven will beep and display a F2 for no apparent reason. What is this?

Mar 09, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Ge xl44 self cleaning gas oven willnot come on


Hi, Before you go working too hard to get you oven to go intothe self clean mode(self destruct)....check out this tip...

Self Cleaning Oven Problem


heatman101

" Wish I had read this first. I never would have used the self cleaningoption. Thanks for the info!!

Feb 20, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

I have GE XL44 range. How long should i run self


Hi, Before you go working too hard to get you oven to go intothe self clean mode(self destruct)....check out this tip...

Self Cleaning Oven Problem


heatman101

" Wish I had read this first. I never would have used the self cleaningoption. Thanks for the info!!!!

Dec 09, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

4 Answers

Lost instructions - I have my oven cleaning how


Typical oven self clean cycle is 3 hours. Oven needs to cool down to under 550 degrees before door will unlock. Download a use and care manual at http://www.geappliances.com/service_and_support/literature/

Nov 20, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

2 Answers

Ge xl44 after self clean cycle the door won't open and the display says "locked door" flashing.


Unplug the unit or shut off the circuit breaker for 5 minutes. Plug the unit back in or turn on the circuit breaker. Set the clock and gently try moving the door lock lever (is so equipped) or opening the door.
or
Set the self-clean cycle again and only allow it to work for 15 minutes. Cancel the self-clean cycle and allow the oven to cool. Gently try moving the door lock lever (is so equipped) or opening the door.
If these procedures fail to correct the condition, the lock must usually be accessed and moved manually to open the door.
Some model ovens require the oven door to be manually unlatched before the controls are returned to the OFF position or else the door may not be able to be unlocked. Check the owner's manual for proper operating procedures.

Sep 25, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

JGBP79 GE Spectra XL44


Yes I had the same problem on my JGBBP79. Change the lower igniter. About $75. Keep the range for a few more years and get rid of it. The next problem you'll mostly likely have is the touch pad F1 error. That stupid thing is +$300 and nothing more than a membrane touch pad attached to some glass. :-(

Nov 08, 2007 | GE Profile Spectra JGBP79 Gas Kitchen...

Not finding what you are looking for?
GE Profile Spectra JGBP90 Gas Kitchen Range Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Ismael Rodriguez...

Level 2 Expert

184 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Cindy Wells

Level 3 Expert

6068 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...