Question about Brother Ml100 Standard Electronic Typewriter 16-2/5x15-1/8x5-1/3 Gray

1 Answer

Hammer wont strike, just bought new. - Brother Ml100 Standard Electronic Typewriter 16-2/5x15-1/8x5-1/3 Gray

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Brother Expert
  • 297 Answers

Check to see if you are in the display mode (it displays what you are typing, the carriage moves along, but only prints when you hit the return key)

Posted on Sep 13, 2013

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bought new Brother ML300 will not type anything on the paper, please help!


I would check all the basic stuff first. Is the print wheel locked into position? Is the platen all the way forward? (lever right side) Is the ribbon installed correctly and not cocked up on one side? Do you hear the hammer striking the paper? If you hear the hammer striking the paper, it is a ribbon problem. If you don't hear it, it is a hammer / print wheel problem.

Jun 24, 2014 | Brother ML-300 Typewriter

1 Answer

Hammer doesd not strike


There is a clutch system under the ribbon carrier that has to rotate to move the hammer, see if you can see if this part is rotating, also there is a spring that puts pressure on the hammer. If this clutch is not moving it may need replacement,, or cleaned with alcohol.

Apr 14, 2014 | Brother ML-500 Typewriter

1 Answer

The striking hammer does not function


I know this is pretty basic but did you push thelever next to the print hammer to the back to latch the mech. to the rear?

DickyO

Apr 18, 2012 | Smith Corona Wordsmith 200 Typewriter

1 Answer

My AX -430 typewriter was functioning well as i was using it. However as i was typing a new word, the letters are no longer visible on the paper. The part that hits or is it the hammer or arm, can no...


It sound like you have a broken part. If the hammer is not hitting hard enough, the armature theat make the hammer strike the keys is broken. This is a common problem with the ax's

Mar 03, 2011 | Brother EM-430 Typewriter

2 Answers

How to install new races without a press? 1988 K5 Blazer 4x4 front.


you use a large brass drift punch and a ball pen hammer, tap in with hammer to set, then drive home with brass drift punch, any sears store will have the brass punch, about $15.00

Sep 27, 2009 | 1988 Chevrolet Blazer

1 Answer

Wheelwriter 6 typewriter hammer no longer strikes


It is pretty common for the pad on the solenoid to strike the keys wears out, and for the batteries to be dead for the memory. Your machine probably needs a good cleaning, oiling, and a new pad for the striker. about $100.00 in the shop.

Jun 30, 2009 | Office Equipment & Supplies

1 Answer

I want to remove the magneto from a Yamaha xt350 1997. I bought the magneto puller tool from Yamaha. I don't know what to do with it. It is an xt-350. Not in the list of model, so i entered xt-600 instead...


Back the screw handle out so the end of the screw is inside the the large collar. Remove the nut and washer holding the flywheel on the crankshaft. Screw the puller collar fully into the flywheel. Now turn the screw handle inward to contact the end of the crankshaft. Tighten the handle down then strike the handle arm with a hammer for extra pressure on the screw. Next, strike the center of the screw with the hammer. Alternate strikes between the center screw and the screw handle. Do that until the flywheel pops free. Some pullers have flats for wrenches instead of a screw arm. The principle for removal is the same.

Apr 13, 2009 | 1997 Yamaha XT 600 E

2 Answers

The hammer does not strike on the platen


If this is an IBM wheelwriter you need the plastic solenoid cap.
We sell them for 20.00 includes S&H and inst.
216-241-0027

DickyO

Apr 08, 2009 | IBM Office Equipment & Supplies

1 Answer

How do i remove the magneto flywheel from a yamaha dt 175 1991 model? tapered or threaded shaft?


You will need a flywheel puller, ( dealer can sell you one > low cost ), and a hammer.
Remove the nut and washer holding the flywheel. Now screw the puller into the flywheel as far as it will easily go. Be sure to back off the pullers' center screw when mounting puller. Tighten the center screw REALLY tight then firmly strike the center of the puller screw with a medium size hammer. Alternate tightening the center screw and striking with the hammer. To tighten the center screw you will want to strike the screw handel with medium hammer force. A few blows with the hammer should pop the flywheel.
....
Please rate this answer after all is done. Thanks.

Mar 17, 2009 | 2006 Yamaha DT 125 X

2 Answers

Cannot get daisy wheel to type correct letters


Turn oFF the typewriter, take the ribbon out.....use the lever on top to release and remove the print wheel cartridge. Lightly rotate it to see if it will move and reinsert the cartridge. snap it back into place.
Turn on the machine, the typewriter should move the carrier to the left and reset the printwheel....if it is snapped back properly.

Jan 14, 2008 | Brother GX-6750 Typewriter

Not finding what you are looking for?
Brother Ml100 Standard Electronic Typewriter 16-2/5x15-1/8x5-1/3 Gray Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

James Cagle
James Cagle

Level 2 Expert

482 Answers

Jim Keysor

Level 2 Expert

331 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...