Question about Stanley Hand Tools

2 Answers

STANLEY QUICK POINT BLADES...CAN'T FIGURE OUT HOW TO CHANGE.

I have a ''simple'' box cutter with snap off blades, Stanley QuickPoint. I cannot get the remainder of the old blade series out nor the new multi-blade in. Help.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

It sounds like your blade is stuck. You can take a phillips head screwdriver and undo the two screws to take it apart. It is possible the metal slider or the plastic insert is out of alignment, bent, or just out of specs a little and your blade will get stuck. If this is the case you may have to align the internal components or always take it apart to change the blade. With a screwdriver, you should be able to change the blade in less than a minute.

Posted on Jan 19, 2013

Ad

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 75 Answers

There is a SLOT in the end of the knife. Simply insert the strip of new blages in to the slot and you are ready to go.

Good luck. :)

Posted on May 04, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I clean the dust off a Stanley floor fan?


Unplug it. Carefully take off the grill and use a vacuum and/ or a damp cloth to clean the blades etc. Do not soak with water. Just a DAMP cloth on the blades only!!!!

Sep 10, 2014 | Lasko 655702 Stanley Blower Floor / Box...

1 Answer

How to change stanley 99E blade


Hello, Go to this youtube website too see video on changing the blade.

Jan 01, 2014 | Stanley Bostitch 10150 Straight Handle...

1 Answer

How do i change the blade on the stanley box cutter fat max?


Push the blade out as far as it will go and hold in the button on the side while slideing blade in and out.

Apr 20, 2012 | Stanley Hand Tools

1 Answer

How to open stanley fatmax knife 10-778 TO CHANGE THE BLADE. thank you


How do I change the blade on the quick change/instant change knife? Warning: Blades are sharp and can cause serious injury. Be extremely careful when handling blades. Wear eye protection and dispose of used blades properly, such as wrapping in duct tape.


FULLY EXTEND THE BLADE.

Press down and forward again on the slide button until the button is in the full front of the top slot (0 through 3 in the below picture).

Note- the blade must be extended beyond the 3rd detent position. This will cause the slide button to remain in a down position, allowing the blade release button to operate.

PRESS AND HOLD THE BLADE RELEASE BUTTON ON THE FRONT SIDE OF THE KNIFE. (Step 4 in the below picture)

Note- if the blade is not fully extended beyond position 3) , the blade release button will not work.

Remove the old blade carefully.
Insert new blade.

NOW, RELEASE THE BLADE RELEASE BUTTON.
ENSURE THE BLADE IS LOCKED IN PLACE. If the blade does not retract, try carefully giving a slight tug on the blade to reseat.

Jul 13, 2011 | Stanley Fatmax Xtreme Retractable Utility...

2 Answers

How do you put blades in stanley fat max extreme razor knife


Not sure exactly because I don't own one, but the review seems to indicate you push the blade positioner all the way forward, and push a release to remove the old one out the front, and then push a new own in until it clicks in place. With the blade positioner all the way forward.
But the review said it did not work well.

http://www.crunchgear.com/2008/12/05/review-stanley-fatmax-utility-knives/

Feb 26, 2011 | Stanley Garden

1 Answer

I unscrewed Stanley 10-379 Interlock retractable knife and now I don't know how to put back the gizmo that fell out or the three blades that came with it.


Google: how to change blade in Stanley 10-379 utility knife. Stanley website shows how knife & blade look on the outside. Put it together so it looks like that. Sorry, but ain't don't know how to send the picture to you.

Oct 21, 2010 | Garden

1 Answer

How rare is a 120 block plane made by stanley USA NO STARS ON IT


these planes were made by stanley from 1876 till 1947, it is about 7 1/2" long and cutter is 1 5/8" wide, it is virtualy exactly same as stanley 110, but it has blade raiser installed.

most popular are models without star and these are valued at anything between $20 to $80, depending on the condition, if with original box, labels, they are about double the price.

6 star model, second most popular, is not exactly rare but value can be between about $50 to $250

5 star model, it is rare, if complete, its value is between $300 up to $800, it differs in that that it have raised front end knob receiver

original price was $1. and for another $1 you will receive dozen blades...

i hope this help you?

if you are satisfied with my answer, please do not hesitate to leave comment and give me your vote4, thanx!

Jul 30, 2010 | Bailey Stanley 12-920 - Block Plane

1 Answer

WAS ABLE TO OPEN THE STANLEY SWIVEL LOCK UTILITY KNIFE AND REMOVE DULL BLADE. NOW i CAN'T GET THE NEW BLADE IN AND CLOSE THE KNIFE PROPERLY, WHAT'S THE TRICK?


If you use the wrong brand of blades, they won't let the knife shut all the way. The notch is cut slightly differently. The same is true for the Kobalt knife I just bought at Lowes. Get the Stanley blades that are right next to the knives - they are the only ones that work.

Sorry.

If you bought the Stanley blades, then I don't know what the problem is. Sorry for that too.

Nov 20, 2009 | Stanley Swivel - Lock Fixed - Blade...

Not finding what you are looking for?
Hand Tools Logo

Related Topics:

1,527 people viewed this question

Ask a Question

Usually answered in minutes!

Top Stanley Hand Tools Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Dan Apthorp

Level 3 Expert

2824 Answers

Bill Boyd

Level 3 Expert

53755 Answers

Are you a Stanley Hand Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...