Question about Euro-Pro 534DX Mechanical Sewing Machine

Open Question

My Euro Pro 534dx Serger will not sew. I have checked the threading and everything is OK. The initial problem started when both needles broke at the same time. I changed the needles with new ones and it stopped sewing.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

wroblow

  • 1 Answer

SOURCE: needle will not pick up bobbin threat

I had the exact same problem. The timing is off. You can actually fix this yourself all you need is an allen wrench. If you look at the rod the needle is inserted into and follow it up to about 2 inches below the top of the machine there should be a clamp. use the allan wrench to loosen the clamp and adjust the needle height. I used this website as a guide to getting the timing correct. http://www.sewusa.com/Sewing_Machine_Repair/Repair_Pictures/timing1.gif

now if only I could figure out why my thread keeps getting jammed under the bobbin!

Posted on Feb 22, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: the bobbin thread on sewing machine will not catch

how do you retime

Posted on Aug 13, 2008

Anonymous

  • 65 Answers

SOURCE: friends broke needle on my euro pro multi stitch sewing machine.

According to Euro-Pro.com
Where can I buy new needles?
Answer: The needles are universal and can be purchased at any sewingmachine notion department. The size and type of needles should beappropriate to the fabric used. See the needles and fabrics chart inyour instruction book.

http://www.euro-pro.com/europro/faqdetail.aspx?modelno=9000
has all the information including a downloadable manual (pdf file)

Posted on Jan 24, 2009

Anonymous

  • 1 Answer

SOURCE: How do I keep bobbing thread from bunching on model 375?

You can get a PDF manual for this model on the Euro Pro website, to show you how to thread correctly and more

Posted on Jul 06, 2009

Anonymous

  • 1 Answer

SOURCE: I have a Shark Intelli Sew 9110 Euro Pro. It was

There is no solution for that problem. My machine was doing the same thing, I returned it for "repair". Got it back 2 wks later and had the same problem. Just the other day, the machine did that, and then something "popped" and now the upper thread won't catch the bobbin thread. I called Customer Service and was told that if I want my machine repaired, I have to send them a check with the machine for $81! Your best bet...get rid of the Intelli-Sew and buy something that doesn't break every month or so!

Posted on Mar 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a euro- pro model 385x. Every time I try to sew, the needle jams and the bobbin is surrounded by thread. I have tried loosening the bobbin as well as tightening it but to no avail. I get a big...


The problem is likely the threading. Double check the threading, look twice or three times at the diagram. Even me, a tech sometimes threads a machine or serger wrong.

Derek

Jan 17, 2011 | Euro-Pro 473

2 Answers

Need manual


You can get the manual here. As for the power cord I would call your local sewing machine distributor.

http://homeappliance.manualsonline.com/manuals/mfg/europro/101548.html

Good Luck

Jan 18, 2009 | Euro-Pro 534DX Mechanical Sewing Machine

2 Answers

Euro pro serger model 101-548


3 thread overlocking (serging) is no different t 4 thread, except you remove one or other of the needle threads.

The stitch width is then controlled by two variables,

the manual width dial selector, and
your choice of either the right or left needle

Suggest yo play with width selector on a scrap of your project fabric to achieve the look you are after.

Feb 17, 2008 | Euro-Pro 534DX Mechanical Sewing Machine

1 Answer

Threading the Machine


Take a look HERE for a threading guide for your EuroPro 534DX........

.......now you can get to work with it !!

Feb 14, 2008 | Euro-Pro 534DX Mechanical Sewing Machine

2 Answers

I can't find Euro pro feet for my serger style #100-547H


Call Euro-Pro at 1-800-361-4639 they sell the accessory feet, replacement loopers, needle plates, etc. The only foot I found they don't carry is the standard one the machine comes with.

Feb 10, 2008 | Euro-Pro 534DX Mechanical Sewing Machine

2 Answers

Euro pro serger


There is a threading chart here

Bargainbox

Jan 22, 2008 | Euro-Pro 534DX Mechanical Sewing Machine

Not finding what you are looking for?
Euro-Pro 534DX Mechanical Sewing Machine Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Irene Tulloch

Level 2 Expert

498 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

75 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...