Question about Frigidaire FEX831CS Top Load Stacked Washer/Dryer

Open Question

How do you change the dryer belt- as simply put as possible, thank you

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My dryer makes a squeaking noise as it dries. It started doing this for a few minutes, but it now does it all the time. What's up?


Sounds like a roller bearing is going bad. Oling it would only be ashort term fix. The bearing needs t be replaced

Sep 12, 2009 | Dryers

2 Answers

Dryer heats but wont tumble/electric


Broken belt due to bad rollers or idler or simply rotten belt. GUIDE

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Jun 30, 2009 | Kenmore 63942 Dryer

1 Answer

Dryer drum does not turn - only by hand?


Try this link, the first one the maytag one has the actual instructions, all dryers a pretty similar you just have to route the belt according to the diagram!! Good luck,, ps a good rating would be nice! thanks




http://fixitnow.com/wp/2004/08/19/appliance-repair-revelation-how-does-that-dryer-belt-go-back-on/

May 10, 2009 | Dryers

2 Answers

Stuck on Sensing


Fixed! I opened up the top of the dryer (which can be done by simply removing three screws on the back of the unit and then sliding the top back and up) and found that the dryer belt was snapped in half. There is a belt tensioner near the motor that has a switch in it and will not allow the dryer to start if there is no tension on the belt. I was able to change the belt by myself for only $10, but it was not the easiest thing to do so calling a service shop would be recommended.

Mar 19, 2009 | Whirlpool Duet 7.0 Cu. Ft. Capacity Plus...

1 Answer

Dryer heats but does not tumble.


Yes, it is possible that the drum belt is broken.




Please rate this a FixYa

Jan 31, 2009 | Kenmore 74642 Gas Dryer

1 Answer

Maytag dryer model # MDE4000AYW, Serial # 28636682YK: When running the machine ha low pitch growl and vibration. Possible belt problem?


Friend,
ngfam1 At your service!

Yes, Possibly a belt needs to be changed!
Do not put off the service call for delay may cause more severe problems if it is not a belt. ANY TIME YOU HEAR GRINDING SOUNDS LOOKOUT! A belt is usually only a squealing noise!

A good company to use that's found nation wide.
A&E Factory Service
A&E has schedulers available to take appointments 24/7
And they do warranty work too, for most manufactures!
1(800) 905-9505

You will be fine
Bless You ngafm1
PLEASE GIVE ME A GOOD RATING BEFORE YOU SIGN OF

Aug 30, 2008 | Maytag Dryers

2 Answers

Hotpoint condenser dryer ctd00


change the drive belt. evidently the belt has stretched to the point the belt tensioning device can no longer do its job. when you change the belt make a diagram of which way the belt is reaved through the tensioning device. if you don't you'll be back here asking how to arrange the belt.

Jun 19, 2008 | Hotpoint TDC32 Electric Dryer

1 Answer

Tumble dryer


pull the front off then put the belt around the drum then pull the idler pulley back to put tension on it and put the belt around the motor pulley let the idler pulley back against the belt to keep it tight replace the front and your done

Mar 12, 2008 | Dryers

Not finding what you are looking for?
Frigidaire FEX831CS Top Load Stacked Washer/Dryer Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

J. Bradshaw

Level 2 Expert

121 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...