Question about Sewing Machines

1 Answer

Ishow me how to rewind the bobbin on a touch tronic 2001 singer sewing machine

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 208 Answers

Presser foot up, takeup lever at the top, thread the machine normally all the way and through the needle, open the needle plate, press the little lever to the right, wind the thread from the needle round the presser foot screw, press on the foot control slowly and wind the bobbin, when you have enough thread on the bobbin close the slide plate the winder will drop down, pull the threads to the back of the machine and start sewing

Posted on Oct 31, 2013

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: bobbin filling on Singer 626

The Singer 626 has a self-winding bobbin. You place the empty bobbin in the bobbin thingie (sorry for being so untechnical). On the left of the bobbin you will see a "lever" with a circular top on it (I think it is red-ish) Again, sorry for being so untechnical. Press the "lever" down. Thread your machine, thread the needle, wrap the excess thread from the needle around the knob that tightens the needle and holds it in place and press your foot down on the foot pedal. The bobbin will automatically wind as you hold the foot pedal down. Do not wind the thread onto the bobbin past the outer white line.

Posted on Sep 29, 2008

Anonymous

  • 1 Answer

SOURCE: Singer Touch Tronic 2001 Sewing Machine Stuck on Sewing Straight Stitch Only

I had a similar problem a couple of years ago. I finally figured out that I had the straight stitch needle plate (the one with the single hole), rather than the zig zag needle plate (the one with the curved hole). When I changed plates, it worked fine.

Posted on May 27, 2009

teresabeegle

  • 1 Answer

SOURCE: how to thread the bobbin on a singer touch and sew model # 625

how to wind the bobbin of the singer touch and sew model 625



Posted on Jul 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for manufacture date/place for singer touch tronic 2010 serial number A3195D122


If you contact Singer, they may be able to provide you with that information.

Quote...

"I have a Singer Touch Tronic 2010. Though not a 2001, this machine was purchased for me by DH for Christmas in 1983. It is now 28 years old and sews like it did when new. I have had this machine serviced three times in all those years and not because anything needed repair, just to have it properly cleaned/oiled. It probably has several million miles on it. Back then I made a new outfit for work every week. I knew it should have been serviced more than that as I used it constantly. At one time, it was my only machine for eight years and since I sewed constantly, I couldn't bear to be without it for any length of time. Now that I am older and wiser (LOL) and have five sewing/embroidery machines including this one, I'm more attentive to the machines getting serviced on a regular basis. This machine aside from having sentimental value since DH purchased it, is still my favorite for regular sewing. It makes a great single chain stitch by placing an attachment in the bobbin that my newer and much more expensive machines don't/can't do. It is now at our week-end home and I smile every time I sew on it.

I agree with the advice to go ahead and use it and see how it performs, but not to put too much money into any repairs if it should need them.

Barb"
from beginner question about old machine Singer Touch Tronic 2001

Jan 02, 2017 | Singer Sewing Machines

1 Answer

Do Singer Touch and sew replacement bobbins from JoAnn fabrics fit my Singer touch-tropic 2010?


The part number may answer your question:

Bobbins 10pk Singer 181551

The bobbins I pulled up for JoAnn's site, does NOT say the bobbin fits your model.

Singer Touch Tronic 2010 Owner Manual Page 5

...

Nov 19, 2016 | Singer Sewing Machines

1 Answer

2001 Touch Tronic. Worked fine yesterday. Today, why can't I wind a bobbin?


If you haven't cleaned and oiled your machine recently, you might start there. Consult your owner's manual, use ONLY fresh, good quality sewing machine oil, and apply 1-2 drops of oil each spot specified in the manual.

If the machine bobbin winder is still not working, does it still sew? If so, you probably have two choices:

1) Take it in for service
2) Buy a standalone bobbin winder (~$30) from JoAnn's, Hancocks, or Amazon.com

If the machine does not sew, take it for service.

....

Dec 28, 2015 | Singer Sewing Machines

1 Answer

Noisy Singer Touch Tronic 2010 sewing machine


the noise could be from the needle /hook timing, or bobbin carrier
take it to a service center for a service and to find out the worn/ loose parts

Dec 21, 2015 | Singer Sewing Machines

1 Answer

Bobbin will not load on a singer touch-Tronic 2000


Please check the bobbin tension or you bought a new bobbin and case otherwise check the timings.

Jan 31, 2014 | Singer Sewing Machines

1 Answer

Show me how to rewind bobbin for a singer sewing machine touch tronic 2001


You may source thru google or utube under bobbin winding for singer sewing machine video

Oct 30, 2013 | Sewing Machines

1 Answer

How do I rewind the bobbin on my singer touch tronic 2001? It was handed down to me without a manual.


you can go to www.tandtrepair.com and they show lots of free things for your machine, like winding the bobbin etc. Also, you can order a hard copy of your manual from Singer, 1-800-4singer for $15 or download one for $12 from www.sewingmanuals.com and pay through paypal. You have lots of choices. Good luck, Happy New Year

Jan 02, 2011 | Sewing Machines

1 Answer

Bobbin stitch is loopy


4 is the "middle of the road" tension number, but it depends on the thickness of your fabric.

Jun 15, 2009 | Singer 132QRFB Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6063 Answers

Chris Wetmore

Level 2 Expert

190 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...