ck fluid if low add pump pedal if still on ck with flash light the brake pads you can see them through wheel if pads look real thin take in for brakes if pads ok and fluid ok and brakes seem to work take in as soon as can to be safe the brake light comes on only if fluid is low pressure is low or pads are low the abs system covers the rest.

Jul 29, 2012 | 2009 Renault Megane Hatch

1 Answer

Green start button won't stop blinking

START/RESET status indicator light flashing

You have pressed the indicator light flashing START/RESET pad while the START/RESET dishwasher is running. This will cancel the cycle. The light will stop flashing after the dishwasher drains (about 90 seconds).

• Press the pad once to start the dishwasher. Press the pad a second time when the dishwasher is running only if you wish to cancel the cycle.

Power to the dishwasher was turned off while a cycle was running and power has just been restored to the dishwasher. The blinking lights indicate that the dishwasher is draining the potential water inside.

• The light will stop flashing after the dishwasher drains. A new cycle will start automatically.

Good luck

Nov 29, 2010 | General Electric GLD6966RSS Stainless...

1 Answer

Both ink and paper light are flashing alternate and I cant get the printer to work epson d68

Your printer needs to be reset. Flashing lights means that your waste ink pad is full when that happens printer stops working to prevent flooding of waste ink inside your printer. Google search for a resetter program for epson d68. You need to replace the waste ink pad or create a tube line to divert the waste ink out of the printer. Good luck.

Jan 11, 2010 | Epson Office Equipment & Supplies

2 Answers

Ink light and paper feed light are flashing alternatively, printer not responding at all !

I just had this same problem, and came here to figure out what to do about it. Turns out I had the CD/DVD tray in the out position, so all I had to do was flip the switch to stow it and the flashing lights stopped. Maybe it will work for you as well.

Aug 22, 2009 | Epson Stylus Photo R260 InkJet Printer

1 Answer

Can't swing the bat with the controller

check if the lights on the pad are flashing you need to sync the pad

to do this you hold the red button inside the battery casing and the

red button inside the SD slot casing and wait till the light stop flashing

and go to the light corresponding to your controller

that is it it should work and be synced for every game

Jul 21, 2009 | Nintendo Mario Super Sluggers for Wii

1 Answer

Orange check light on my dash flashes while driving.

That orange light means that you must have your braking system check...most probably it's the pads wear indicators that are earthing warning you that the pads are worn.

Apr 20, 2009 | 1988 BMW 3 Series

1 Answer

Reset waste ink counter on Epson C60 printer

If both lights are flashing, it means the Waste Ink Pads in your printer are saturated with ink and the waste ink "protection" counter has exceeded its limit. The Waste Ink Pads should be replaced as soon as possible. You can restore your printer to a working condition immediately by using the SSC utility - download from

http://www.ssclg.com/epsone.shtml

and use it to reset the Protection Counter. This will stop the lights flashing and restore normal operation.

However, remember that eventually ink will overflow from the waste ink area and make a dreadful mess, so you must change the waste ink pads before this happens. This requires the disassembly of the printer.

If you decide to have a go at replacing the ink pads yourself, report back and I will provide further help.

Feb 24, 2009 | Epson Stylus C60 InkJet Printer

1 Answer

Epson C46 has stopped printing with message saying service needed but nobody wants to make it carry on working

If both printer lights are flashing, it means the Waste Ink Pads in your printer are saturated with ink and the waste ink ("protection") counter has exceeded its limit. The Waste Ink Pads should be replaced as soon as possible. You can overcome this problem temporarily by using the SSC utility - download from

http://www.ssclg.com/epsone.shtml

and reset the Protection Counter. This will stop the lights flashing and restore normal operation. However, remember that eventually ink will overflow from the waste ink area and make a dreadful mess, so you must change the waste ink pads before this happens.

If you wish to pursue this matter further, report back.

Apr 12, 2008 | Epson Stylus Photo R200 InkJet Printer

1 Answer

Jenn-air jes9800AAB keeps buzzzing, front function panel flashes on and off

Your control panel is getting ready to quit. Mine did the same thing, I ignored it and now nothing on the touch panel works. About $150.00 for the part.

Jan 14, 2008 | Jenn-Air JES9800A Electric Kitchen Range

Not finding what you are looking for?

View Most Popular

Heating Pad HP218 12 3P

Health & Beauty

Model HP910 heating pad -- top red light on controller flashing. Have to pull from wall plug to stop. No heat of course either. Yellow lights up and races Through the others and flashes non stop!

The Video Game Consoles & Games

Open Questions:

0 Answers

temperature control LOVE my HP! Now own six. (Office too.)Bought two more to give my favorite neighbors! HOWEVER, Even on "Low" it's too warm. Help?

Apr 07, 2014 | Softheat Heating Pad HP218 12 3P

0 Answers

quiero unir todo los cables interiores de Gemoro Platinum 600SS Pocket Scale

Feb 16, 2014 | Softheat Heating Pad HP218 12 3P

0 Answers

heating pad blinking light when I select any heat range the top green light starts to blink. I have unpluged the equipment and tried several types of on and off procidures nothing works

Feb 09, 2014 | Softheat Heating Pad HP218 12 3P

0 Answers

blinking light The high light keeps blinking and it won't get warm

Jan 20, 2014 | Softheat Heating Pad HP218 12 3P

See all Softheat Heating Pad HP218 12 3P Questions

Ask a Question

Usually answered in minutes!

Are you a Softheat Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Softheat Heating Pad HP218 12 3P? Or just drag it here!

Flashing light.....how to get it to stop and get pad to work

Add Your Answer

Attachments: Added items

Related Questions:

Model HP910 heating pad -- top red light on controller flashing. Have to pull from wall plug to stop. No heat of course either. Yellow lights up and races Through the others and flashes non stop!