Question about Emerson LC320EM8 32 in. LCD TV

1 Answer

Dish Network Remote Codes? Can't seem to get the few I have to work the dish remote

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 73 Answers

If your remote is a learning remote (has a little black glossy square on the top left side of the remote) you don't need a code, you just need the original remote. Place both remotes on a table, or other flat, sturdy surface, with the original TV remote facing the square on the DISH remote. Make sure both remotes have functioning batteries. On the DISH remote, hold down TV until the button blinks three times, then hold down record (for 5+ seconds) until the TV button lights up and stays on. Then, slowly, for each key you want to use, hit the key on the DISH remote (TV light blinks) then the corresponding key on the original remote (TV light blinks). For example: DISH Volume Up, TV remote Volume Up. When you are done learning all the keys you want to train, hit SAT. The TV light will blink three times, then the SAT light will light up for a moment. Try the DISH remote on your TV functions.

Posted on Mar 16, 2015

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: Remote code for Emerson SLC195EM82 TV

Here is a list of remote codes for Emerson TV: 004 009 014 023 024 025 026 027 030 032 033 034 035 036 037 038 039 040 041 042 043 045 046 049 053 116 135 147 177 179
Give them each a try (a pain I know) and please rate me if they work!
Take Care,
-WN

Posted on May 06, 2008

Anonymous

  • 1 Answer

SOURCE: Need codes for Emerson on the DISH remote

We hooked up a different TV to our dish and it only changes the channels....does not let us use the remote to turn it on or to control the volume.

Posted on Jan 03, 2009

Anonymous

  • 114 Answers

SOURCE: Emerson TV/DVD Model #: LD195EMX

check out this web site, it looks like what you're looking for

Posted on Jul 31, 2009

freetek

Steve Allison

  • 5569 Answers

SOURCE: Remote control code for dish network for Emerson

Your Dish remote was probably designed years before the Emerson set and may never have codes for it.
However, you can try the followng brands from the Dish code list to see if you can get some basic functionality:
Funai, Symphonic, Sylvania, Aventura, Durabrand, ESA, Magnavox, INSIGNIA, Philips and Misakai

All of the above are manufactured by Funai - the least and lowest of the Japanese electronics firms.

Posted on Sep 07, 2009

Anonymous

  • 1 Answer

SOURCE: DISH NETWORK REMOTE FOR EMERSON LC200EM8G

I have a LD195EMBZ. I called Emmerson and they told me that they are a little behind on getting current codes. I told him " Just little behind huh, I bought my TV 2 1/2 yrs ago." He laughed (just a giggle), and said, yeah I know, I am really sorry. Not the tech supports fault........Emmerson needs to get on the ball, and do there job. Just my opinion.

Posted on Jan 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a remote code for my dish network VIP722k DVR with my sony RMVZ320 remote


Check with DiSH for a possibly unpublished code. You may find that only the DiSH remote will work.

Jan 01, 2014 | DISH Network IR Remote Control

1 Answer

Codes for innovage universal remote to program it with my dish network box


Hi Gw, my name is Mike Houston a Social Media Representative at DISH. I understand you want to program your innvoage remote to our DISH receiver. When we send out our DISH receivers we will include our own DISH universal remotes that can control many different components like; HDTV, surround sound receivers and sound bars. We do not have the codes for other universal remotes to work with our system. I will provide you a link explaining in more detail on programming your remote: http://www.ehow.com/way_5501311_innovage-jumbo-universal-remote-instructions.html

Sep 01, 2012 | DISH Network ViP722 DTV Receiver /...

3 Answers

Does anyone know the remote code for a sanyo tv model dp42647 on a dishnetwork remote


Remote Codes ' MyDISH ' DISH Customer Support

https://www.mydish.com/support/remotecodes
Remote Control Manuals · Program Remote to TV/Other .... remote, product type, and manufacturer below to see the current known remote codes you should try.

My Dish remote needs programming for Sanyo TV ... - Directly

https://www.directly.com/.../dish-network-my-dish-remote-needs-progra...
My Dish remote needs programming for Sanyo TV, Model DP226649. My Dish ... Needcode. Alta asked this ... Dish Network • 16808 answers • 95% helpful. Code is ... Test volume control, if it works you're set ... try 590 it should work. tivosat.

How do I program my dish remote to work for my Sanyo TV.

https://www.directly.com/.../dish-network-how-do-i-program-my-dish-re...
Dish Network. How do I program my dish remote to work for my Sanyo TV. ... entercode 590 press pound then sat Then try to turn tv on and off then try volume.

How do you program a dish network remote to my sanyo tv? ' Ya


Jan 09, 2012 | Sanyo 42 in. LCD TV

1 Answer

I need a code to operate a Vizio Blu-ray player, VBR231, with Dish Network remote control. Thanks! ctelschow@msn.com


HERE ARE A FEW SUGGESTIONS TO LOCATE A SUITABLE CODE FOR YOUR

VIZIO BLU-RAY PLAYER, MODEL VBR231

  1. HITATCHI CODES ~ VIZIO CODES
    WHICH MEANS YOU SHOULD TRY HITACHI BLU-RAY PLAYER CODE(S) LISTED IN THE DISH NET RC MANUAL.
  2. FROM DISHSUPPORT.COM FORUM:
    Scott Greczkowski

    DISHSUPPORT STAFF
    hances are the 5.3 remote will not control that Blu-ray player. What will work however is a DISH Network 21.0 remote which not only has a better IR code database, but also is an IR learning remote. This means if the code is not in the remotes database you can teach it to learn all the functions of your Vizio Remote.The DISH 21.0 remote will also work fine with your 622/722.If you can't find a 21.0 remote then please PM me and I can tell you where you can order one. They may also be available from DISH Network directly.
*Configuring your devices with a "UNIVERSAL" Remote can sometimes be a stressful and frustrating experience. But it doesn't hafta be!*

Here are a few general

GUIDELINES TO UNIVERSAL REMOTE CODE SUCCESS

  • READ THE ENTIRE INSTRUCTION MANUAL THAT IS INCLUDED WITH YOUR UNIVERSAL REMOTE (OR DOWNLOAD ONE FROM THE VENDOR'S WEBSITE)
  • USE THE REMOTES "AUTO CODE SEARCH" FEATURE TO FIND A MATCH TO YOUR DEVICE (IF A DEVICE HAS ONLY PARTIAL FUNCTIONALITY e.g. CHANNEL +/- WORKS, BUT VOLUME +/- DOES NOT= CODE IS NOT THE BEST MATCH FOR YOUR DEVICE)
  • PRACTICE PROGRAMMING (AN)OTHER DEVICE(S) IN YOUR HOME TO MASTER THE PROCESS OF PROGRAMMING CODES WITH THEIR MATCHING DEVICES USING YOUR UNIVERSAL REMOTE CONTROL. TRUST ME, IT BUILDS CONFIDENCE, ASSURES THAT THE RIGHT PROCEDURE IS BEING FOLLOWED IN ORDER TO PROGRAM THE REMOTE, AND PROMOTES EXPLORATION OF THE "UNIVERSAL" ASPECT OF THE CONTROLLER.

Apr 02, 2011 | DISH Network Televison & Video

1 Answer

Need codes for one for all remote to reprogram dish network


you will need your Dish network remote to program your dish network box. This universal will not work. but if you need the full codes for this remote to program to your tv then go download the full manual with codes here.

Mar 18, 2011 | One For All URC-3021 Remote Control

1 Answer

I can't find the remote control code to work with my Dish network remote. The manual code scan doesn't seem to find the right code to sync the tv with the remote. What code do you recommend? I am using...


Hello, my name is Becki Barned, with DISH Network customer service. I did not find any codes for your particular tv. It sounds like a new brand, so we should have codes here real shortly. In the mean time, you can try the power scan again, here are the steps again, and you can keep checking for updates on the codes!

http://www.dishnetwork.com/SupportSection/power-scan-instructions



Becki Barned
DISH Network Customer Service

Jan 15, 2011 | Syntax LT30HV 30 in. HD-Ready LCD...

1 Answer

Magnavox blue ray dvd. model nbmgf c need remote code for dish network


Hi there! In order to be able to provide the definite codes that will allow you to program your remote to your Magnavox Blue Ray DVD player, I would need the type of remote that you have- this can be found on the back of your remote, it would be displayed as something along the lines of 3.0, 4.0, 5.0, etc. To obtain a few codes that will likely allow you to successfully program the remote I used 5.0 because it is a common remote that is used with quite a few of our DISH Network receivers. The codes you can try for your DVD player would be, 829 (most successful) if not then please try the following, 685, 533, 554, or 556. After trying those codes if your attempts are still unsuccessful you can also check the manual that came with the DVD player from the manufacturer or just contact us here at DISH Network - although I do know sometimes the remote codes can be located in the manual. Hope the codes help & work for you!

-Kirstie DISH Network

Oct 05, 2010 | DISH Network IR Remote Control

2 Answers

I have a ILO-26 LCD tv and no code for my Dish Network remote


http://tech.dishnetwork.com/departmental_content/TechPortal/content/tech/remotes/TechRemo2wayCode.shtml

Jun 14, 2009 | DISH Network ViP 211 DTV Receiver

1 Answer

Need code for 32in.olivia tv


Remote manufactures and service providers continuously add support for new TV products. If you have the following Satellite or Cable Systems, try these remote codes for Olevia HDTVs.

Also available is the Olevia Universal Learning Remote RC-LRN that offers component programming of most video hardware including your Cable or Satellite Receivers, VCR's, TiVo’s, DVD, Blu-Ray or even HD- DVD players. The learning remote is available at 866-965-3842
Dish Network Remote Codes 506 or 127

could try Dish Network..Remote Codes 506 or 127
Satellite TV Systems Dish Network Remote Codes 506 or 127
Dish Network Remote Codes 506 or 127

May 23, 2009 | Syntax Olevia 537H Television

1 Answer

Dish network remote with a element tv


Since you dont have a popular brand set you should try using the scan method. Here is a link with a video to help program your dishnetwork remote to work with your set. http://www.disheez.com/videos/dish-network-video/programming-dish-network-remote/

Nov 23, 2008 | DISH Network IR Remote Control

Not finding what you are looking for?
Emerson LC320EM8 32 in. LCD TV Logo

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76173 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...