Question about Alesis Masterlink ML-9600 w/ Audio Upgrades

1 Answer

Suddenly stops recodring

During live recordings at church services, the recorder will stop recording, like its on pause. It will stop at various times, from about 3 minutes to as much as 20 minutes, into the recording. The counter will stop keeping time, volume level indicator will stop moving, however the play/pause will not be blinking like its on pause, but pressing the play/pause button twice will get it recording again. This does not happen every time we set it to record but it happens often enough to make it very frustrating. Please respond back with a helpful answer as this has been a problem for some time and if the issue isn't fixed the machine will be scrapped.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,113 Answers

I love my Sanyo mp3 recorder I've been using it in church for 4 or 5 years. It never quits it can hold an extra gig with a chip and i can plug it into my computer to upload it in seconds. I say replace the old recorder

Posted on Nov 17, 2013

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alesis masterlink ml-9600 pauses during recording


  • alesis support
  • from what i can see about the device firmware update is probably what it needs...
  • Alesis Update
  • there address and phone is in top link.....sorry cant get much information from the company with out an account...

Nov 11, 2013 | Alesis MasterLink ML-9600

1 Answer

Power failed in middle of a recording session when the machine was in Pause mode. How can I recover the recorded file?


You can try computer software like Nero or Roxio and finalize the disc as it is. This is exactly why I had advised Churches that went from reliable cassette tapes to CDR to put UPS units on the CD recorders as they do not react too well to power outages. If you were using an Open Reel there would be very little loss of the recorded signal.

Mar 24, 2013 | Marantz CDR-300 CD Recorder

1 Answer

I am getting a lot of hiss when I record low


it is not a problem there are many problem

Aug 23, 2009 | PreSonus Computers & Internet

1 Answer

Converting Audio Cassettes to CDs


First off I assume you have the manual for you're 5700. if not a PDF copy is here
http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000027911.pdf

Assuming you have a standalone tape deck that has phono inputs and outputs connection and recording recording should be easily achieved.
Forget the coaxial unless of course your tape deck has digital outputs.
Assuming it hasn't just connect the two output sockets from the tape dec which may be labelled REC out left and REC out right to the Line in (L) and Line (R) of the CD recorder.
The physical setup is now complete.
The increment level they refer to in the manual offers you a choice of 3 final decibel output levels in other words how loud it will be when it is finally recorded onto the disc.

the last paragraph on page 16 is relevant to the setup described above.

Page 15 of your manual is all you need to achieve tape transfer to CD.
follow the steps below and choose ANALOG the source to be played is your tape deck so once the process has begun press the play button on your tape deck and you should get a decent recording. Leave everything else at their default settings until you get a better understanding of how to tweak your recordings.
Personally I transfer audio tapes directly to my PC and Audio edit them until they are perfect but I've been doing this for years.

Good luck


here's a snippet

To record from an external source:
1. Turn power ON.
2. Place a recordable audio disc (CD-R or CD-RW) label side up
in TRAY II.
3. Close TRAY II. (When a blank disc is placed in TRAY II, the display
will show BLANK.)
4. Press INPUT until the source you want to record is selected.
DIGITAL OPTICAL:
record a source connected to the DIGITAL IN (OPTICAL) terminal.
DIGITAL COAXIAL:
record a source connected to the DIGITAL IN (COAXIAL) terminal.
ANALOG:
record a source connected to the analog LINE IN jacks.
5. Select the desired mode of track division (track number
assignment) by pressing the MANUAL/AUTO button (see the
ADVANCED RECORDING section for more information).
6. Press the RECORD button.
The unit enters record pause mode.
The PAUSE [ ] icon and REC blink on the display.
7. Press the PLAY (ENTER) [ ] button of TRAY II to start recording.
8. Play the source to be recorded.
• During digital recording, if the input signal stops for 5 seconds,
recording will stop.
• During analog recording, if the input signal stops for 20 seconds,
recording will stop.
• If the unit detects copy-prohibit signals during recording,
CAN’T COPY appears on the display and recording is stopped.
To stop recording: Press the STOP [] button
To temporarily pause recording: Press the PAUSE [ ] button.
Remember that every time recording is paused or stopped,
a new track number will be assigned.

Jan 11, 2009 | TDK DA-5700 CD Player

1 Answer

Cannot operate svr-925 digital recorder, need manual


How to Record:
1. Make sure HOLD switch (on side of unit with pocket clip) is set to off position (slide to right is off - to left would be hold)
2. For best results set unit with mic(rophone) which is on top of unit toward sound source and press REC/STOP button (Top button on front of unit just below LCD display). Recording will begin and will be indicated on LCD display.
> Red Record LED will be on and the message number, recording time will be displayed on the LCD.
3. To stop recording, press REC/STOP button one time.
* If no other buttons are pressed within 1 minute at stop position, it will power off automatically.
4. Pause during recording by simply pressing MODE/PAUSE button- press button again to resume.

There is a Voice Operated System (VOS) Recording button on left side also. You can record with voice activation to conserve recording space but I have found that you lose a portion of the recorded sound as it activates and if there is no sound for a very few minutes the unit powers off and you will get nothing further recorded. I recomend just keeping VOS in off position.

5. To erase a recording: Select the message number you want to erase and while it is stopped (the message number will appear in LCD with the length of recording showing also)
Press and hold the ERASE button until the LCD begins blinking "ERASE" then, while it's blinking simply press the erase button again and the recording will be erased.

6. To play back a recorded message find your message by "toggling" the switch on the right side of the unit that says INDEX. That switch is the fast forward/reverse play etc. To Play simply push the switch in. This button/switch takes a little practice to use but the Play portion is straight forward. Use the front buttons to pause and stop during playback.

Hope this helps.

Jan 04, 2009 | Sims SVR-S825 Handheld Digital Voice...

1 Answer

Live recording


do some one have a solution to my problem

Nov 27, 2008 | JVC XL-R2010 CD Recorder

2 Answers

Recording more than one VHS onto a DVD


Try pausing the dvd recorder inbetween tapes, this usually works, otherwise consult your owners manual

Jan 09, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

I am using it to record live in church, Do I need anything from menu?


You need to select the source,then just record and play IIRC.The manual is on sony's site.

Dec 19, 2007 | Sony RCD-W500C 5-Disc CD Recorder

1 Answer

Audio problem with sony sxrd 60" hi def


i am having the same problem, but mine occurs about every 3 minutes. i get a 1 second pause in the audio that shows up in the recordings as well as live. it doesnt seem to matter if it is hd or not, but very frustrating.

Jan 20, 2007 | Sony Grand WEGA KDF-60XBR950 60" Rear...

Not finding what you are looking for?
Alesis Masterlink ML-9600 w/ Audio Upgrades Logo

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alesis Sport & Outdoor - Others Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Bill Eager

Level 3 Expert

459 Answers

Brad Brown

Level 3 Expert

18166 Answers

Are you an Alesis Sport and Outdoor - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...