Question about Motorola Radio Communications
Posted by Anonymous on
The radio frequency you mentioned may be a broadband wide frequency with greater local power for which it over powers the channels nearby. It is similar to shadow waves on a TV when someone is sending a signal with a Ham Radio. Overlap can happen. In short, the disturbance must be within close range, perhaps in the same building.
Posted on Jan 14, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: AXU4100 Manual or help
On a Motorola AXU Series (including the 4100):
1. To unlock, press the “D” button for about a second or until the circle is gone. The circle with the line thru is the keyboard lock indicator;
2. To change channel, you need to press either the arrow left or right in Normal Mode;
3. To change PL (assigned to a channel), don’t think this can be done by the user
4. To change Ch. 1 from 464.500 MHz (PL-67.0) to 463.525 (PL-136.5), don’t think this can also be done by the user.
Even the built-in Programming Mode Parameters do not have this option to change assigned frequencies and PLs. An external programming software using a PC may or may not allow this.
These radios came pre-loaded with its channels assigned with specific frequencies/PLs. As used in a Motorola AXU411, they are:
Channel Frequency PL
1 464.500 67.0
2 464.500 77.0
3 464.500 88.5
4 464.500 179.9
5 464.500 None
6 464.550 67.0
7 464.550 82.5
8 464.550 94.8
9 464.550 179.9
10 464.550 None
Hope this be of help/idea. Pls post back how things turned out or should you need additional information.
Good luck and kind regards.
Posted on Dec 24, 2007
Here is the online programming tutorial:
Here is the full manual Should include Quick guide:
Here is FREE programming software for the PC:
Includes hardware info. You can buy programming cable at Radio Shack to connect to your PC.
Posted on Jan 04, 2008
Hello Jack. To unlock your radio:
turn power off
while pressing the mode key, turn the power back on
I also left you a voice mail on your cell phone with this solution.
Posted on Jan 28, 2008
There may be a door in the front of the ste that is locked. You could take off the back and see if there are any circuit boards attached to the front of the ste and then that would show you where the door would be. Sometimes they losck the door with tabs on the inside and has to be pryed off.
Posted on Mar 21, 2008
I'am having a problem. I do not have codes for a uniden bearcat 145 xl 16 channel, can someone help me please?
Posted on Aug 03, 2008
Tips for a great answer:
Jun 21, 2018 | Philips Televison & Video
May 24, 2012 | Televison & Video
Apr 08, 2012 | Televison & Video
Jan 13, 2011 | Zenith B27A11Z 27" TV
Nov 14, 2009 | Televison & Video
Dec 13, 2008 | Zenith C27A24T 27" TV
Mar 19, 2008 | Zenith C27A24T 27" TV
Feb 03, 2008 | Radio Communications
44 people viewed this question
Usually answered in minutes!