Question about Indesit 24 in. DI67 Free-standing Dishwasher
My dishwasher Indesit DI67S will not run on the number 1 cycle. It will fill and then when that programme finishes it jumps straight to the drying cycle missing all the rinses out etc. If on the number 2 programme it goes all the way through but then doesn't dry. I've also noticed that the water doesn't seem to be heating up much and certainly isn't drying. Is this the element or something else? Once its reached the drying cycle the light for this just flashes then I have a job to try and reset the machine. It can take endless attempts. Will switching the machine off at the mains solve anything or is it the element?
Posted on Aug 08, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Indesit 24 in. DI67
I have had this problem before. If your dishwasher is not level water collects at the front. Try tilting your machine forwards. Be carefull though as water will come out of the bottom. Once you have done this and reset your machine it should be ok.
Posted on Jan 15, 2008
Tips for a great answer:
Jun 13, 2014 | AEG 24 in. Favorit 40630 Free-Standing...
START/RESET status indicator light flashing
You have pressed the indicator light flashing START/RESET pad while the START/RESET dishwasher is running. This will cancel the cycle. The light will stop flashing after the dishwasher drains (about 90 seconds).
• Press the pad once to start the dishwasher. Press the pad a second time when the dishwasher is running only if you wish to cancel the cycle.
Power to the dishwasher was turned off while a cycle was running and power has just been restored to the dishwasher. The blinking lights indicate that the dishwasher is draining the potential water inside.
• The light will stop flashing after the dishwasher drains. A new cycle will start automatically.
Nov 29, 2010 | General Electric GLD6966RSS Stainless...
Aug 27, 2010 | Bosch 24 in. SHU53 Built-in Dishwasher
May 10, 2010 | Whirlpool 24 in. DU1100XTP Built-in...
May 06, 2010 | KitchenAid 24 in. KUDI01FLSS Stainless...
Aug 01, 2009 | Bosch SHU5315UC Dishwasher
Jul 18, 2009 | Bosch 24 in. SHU43 Built-in Dishwasher
Mar 28, 2009 | Hotpoint 24 in. FDW60 Free-standing...
Jan 12, 2008 | Indesit 24 in. DI67 Free-standing...
732 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: