Question about Irons

1 Answer

Team international steam iron

Never used this iron - got it out today and the iron is getting hot and you can hear the water boiling - the steam/ready light comes on - but cannot get any steam through - the cable from the base to the iron is cold????

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 613 Answers

Make sure the valve between the base and iron is open.

Posted on Dec 07, 2013

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 43 Answers

SOURCE: swan steam iron steam coming out of front and leaking water

the temperature is not set correctly for the fabric.

Posted on Sep 18, 2009

johnamyx

John Amyx

  • 108 Answers

SOURCE: No steam reaches iron. Water

The most likely cause is that calcuim or hard water build up has clogged the passage way for the steam try running CLR or a cleaner like it to clear the passage.

Posted on Nov 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water coming out of steam holes


Either: the iron is not hot enough to heat the water to steam temperature or the internal water-flow valve is leaking so that too much water is getting through. Check the iron is getting hot enough first. If it is then run some de-scaler (as used in kettles) through the iron to try to clean all the passageways. Always ensure that you fully re-flush the iron after de-scaling or you'll damage your clothes with any acidic residue left in the iron.

Good luck.

Dec 04, 2016 | Irons

1 Answer

Water boiling inside but no steam wants to come out


Ronel:
The steam port is clogged up with lime. get some vinegar or CLR (calcium lime and rust remover from home depot or lowes or any store like that. Pour the water out of the iron and put the CLR or vinegar in the iron and let it sit for a while. Plug the iron into the wall and let it get hot. It should steam in a while... be careful that you do not breathe in the fumes.

Jun 20, 2015 | Irons

2 Answers

The iron is still working but the water not hot


There is most likely a build-up of minerals around the steam holes. Minerals are in ordinary tap water. The coat the heating surfaces, act like an insulator and prevent iron from getting hot. Clean the hot plate with a fine needle or other fine object and then put in a mixture of vinegar and water and let it steam out. To prevent future mineral build-up, use half distilled water and half tap water. If you can't get distilled water, use ordinary drinking water you can buy from your supermarket (it also cheaper). Don't use 'all' distilled water as it boils (steams) at higher temperature and could ruin your iron. Good luck.


25375659-b5loakqsw5vvimvlxtd0ze34-2-0.jpg

Jan 20, 2015 | Rowenta DG5030 Iron

1 Answer

How do i descale a team international steam pro 2600w iron


Buy a bottle of descaler and put it in the tank where you normally put the water. Put iron on hottest steam poison and run steam , topping up as required. Rinse thoroughly when finished and iron has cooled. Use distilled or demineralised water for steaming and the iron shouldn't require cleaning again.

Dec 02, 2014 | Irons

2 Answers

Floor steamer not getting hot


follow this steps and fix it.
GOD BLESS YOU
Clean an iron:
  1. Unplug the iron and make sure it is cool before cleaning.
  2. Use a toothpick or pipe cleaner to remove buildup in the steam vents, making sure the debris doesn't fall into the vents.
  3. Use a fine sewing needle to carefully clean the spray nozzle of mineral deposits.
  4. To flush sediment from a steam iron, pour 1/2 cup water and 1/2 cup vinegar into the water tank. Place the iron on a rack over a broiling pan and set the iron to steam until the tank runs dry. Repeat if necessary. Or follow the instructions for using a commercial iron cleaner.
Service the steam and spray mechanism:
  1. Unplug the iron.
  2. Use a fine sewing needle to unclog the steam valve assembly. Also, check the valve spring and replace it if it is broken or has lost tension.
  3. If the spray pump is accessible, remove it and check for leaks by placing the spray tube in water and squirting the pump. Clean or replace as needed.
Clean a metal soleplate:
  1. Unplug the iron.
  2. Use a sponge and commercial soleplate cleaner or baking soda and water to remove dirt buildup on the soleplate. Rinse well with water and dry. Don't use harsh abrasives or immerse an electric iron in water.
  3. Use very fine steel wool (0000) or an emery cloth to remove scratches and burns on the soleplate, then clean the soleplate.

Sep 30, 2013 | Conair Compact Garment Steamer Iron

2 Answers

My rowenta steamer is not producing steam but tubing getting hot when I turn on steamer. Suggestions?


see this causes and fix it. God bless you

If the iron heats but steams improperly, inspect the soleplate and clean the vents (see below) and flush sediment out of the steam chamber .

If the iron produces too much or too little heat, test the electrical cord . Also test and, if needed, adjust calibration of the thermostat .

If the iron does not spray properly, inspect and clean the nozzle.

If the iron leaks or spits, clean the steam vents, nozzle, and tank.

If the iron sticks to fabric, clean or repair the soleplate. If the iron stains fabric, clean the soleplate, clean the tank with a commercial cleaner, and use distilled or filtered water.

Feb 03, 2013 | Rowenta Commercial Garment Steamer - White

2 Answers

Mineral buildup in my steamer


To eliminate mineral deposits and prevent corrosion on your steam iron, give it an occasional cleaning by filling the reservoir with undiluted white vinegar. Place the iron in an upright position, switch on the steam setting, and let the vinegar steam through it for 5-10 minutes. Then refill the chamber with clean water and repeat. Finally, give the water chamber a good rinsing with cold, clean water.
-From Reader's Digest 150+ Household Uses for Vinegar

Jul 16, 2012 | Rowenta Irons

2 Answers

Instructions for use DiLonghi StiroMeglio compact iron (steam boiler Iron)


Is a long story but i make short.Don`t be afraid to leave your iron on.Is common to water tank iron to get working in more then 5-10 minutes.That machine are really safe since they do have more then 1 thermostat to control the water pressure.
How they work is pretty easy.The boil the water to a certan temperature and you know after certan F. the water become steam generatin pressure and steam.The thermostat control the heater and the electroswitch release the steam

If your in not making any steam after 5-10 minutes make sure you hear the electroswitch working.Sometimes they get cloght and even if the boil is under the pressure you can not get any steam at all
Good Luck

Jun 10, 2008 | Irons

Not finding what you are looking for?
Irons Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Irons Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Brad Brown

Level 3 Expert

18157 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you an Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...