Question about Denon AVR-2802

Open Question

My Denon AVR 2802 is dead. No display, nothing. Fuses are ok. Please help

Yesterday when I tried to turn on my Denon AVR 2802, nothing happened!! The display is blank, no sound, nothing. I opened and checked the fuses, seems to be okay. Please is there any way I can fix it?? Help!

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 151 Answers

SOURCE: Have he KEF 2005.2 Speakers

Run a phono cable from the monitor out on the back of your amp to the tv then go to that input on the tv and then go to the setup menu on your amp ,also make sure you have the sub cable pluged into the sub preout and not the 6channel input.

Hope this helps.
CABLE GUY.

Posted on Jul 11, 2008

Ad

Anonymous

  • 5 Answers

SOURCE: Denon AVR 2802 - Unit Turning Off

If DIGITAL sign blink, this mean DSP board is defective. It will cut the sound on the AMP section. DSp is maybe defective.

Posted on Aug 29, 2008

mlapres

Mike LaPres

  • 757 Answers

SOURCE: Denon avr-485 wont turn on at all. The unit won't

Check power cord connection.

Posted on Nov 23, 2009

mlapres

Mike LaPres

  • 757 Answers

SOURCE: I am trying to connect my wii to my denon avr-2802

After connecting the Wii cables, connect a video cable to the "monitor out" connection to a compatible input on the TV.

Posted on Feb 15, 2010

dunnbiker

David Dunn

  • 8546 Answers

SOURCE: i have denon avr-2802.. suddenly no sounds will

Register and download the manual for free at retrevo.com


http://www.retrevo.com/support/Denon-AVR-2802-Receivers-manual/id/363bh830/t/2/


Is it silent for ALL inputs including the Test Tones?


Page 33


Function incorrect, Muting, Tape or EXT Input on when it shouldn

Posted on Feb 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Denon AVR-2802 Optical Issue


If you look at page 16 of the user manual it tells you how to assign the devices to the optical connections. Once this is done it should work.
If you don't have the manual just type "denon avr 2802 manual" into Google and it will show a free PDF file of it. On my search it came up first!

Feb 09, 2018 | Denon AVR-2802

5 Answers

Also problem with Denon AVR-2802


its just the amplifier problem

Apr 02, 2008 | Denon AVR-2802

1 Answer

I have denon avr-2802.. suddenly no sounds will come out but the power ok.. help me pls..


Register and download the manual for free at retrevo.com


http://www.retrevo.com/support/Denon-AVR-2802-Receivers-manual/id/363bh830/t/2/


Is it silent for ALL inputs including the Test Tones?


Page 33


Function incorrect, Muting, Tape or EXT Input on when it shouldn

Feb 19, 2011 | Denon AVR-2802

2 Answers

Suddenly after 8 years there is no sound coming out of my Denon AVR 2802 Amp. The inputs are right it is on Auto to pick up digital inputs and none of the inputs are working, really annoying. I have heard...


Actually, Denon used a thermal fuse in the primary of the power transformer. Have a tech check the primary winding and see if it's open. if so , have it bypassed

Jul 22, 2010 | Denon AVR-2802

1 Answer

I have a denon avr 2802. the remote powers the


Try doing a factory reset by turning off main power switch.hold down speaker a and b buttons while turning on main power switch ,display will flash 3 time s then release buttons,this then returns unit to factory default settings.

Apr 13, 2010 | Denon AVR-2802

1 Answer

Hi, I have a denon 2802 av receiver. My Dolby decoder seems broken, the doby-display-indiactor is blinking as soon as a dolby signal is receiced. resettting doesn't help. DTS is still working. Anaybody...


The processor that creates the surround is all on 1 chip so sounds like a software issue.

Call Denon to see if they have a firmware update for your unit this usually is free and may fix the problem

Feb 13, 2010 | Denon AVR-2802

1 Answer

Technical Problem on my Denon AVR 2802


How good are you with electronic repairs...? Do it if only you are confident...

The way you describe you problem it seems more like poor solder connections somewhere on the board. Usually these are at the voltage regulators where there can be some heat. Also, look for any connections that appear to be grasiny or have rings and resolder them too.

Alternatively, suggest that you take it to the Denon service center closest to you.

Best of Luck..

Mar 05, 2009 | Denon AVR-2802

2 Answers

Inert Unit


I have a AVR - 2802 and was working fine. One fine morning when i started the system there was no sound everything is functioning well except the sound. I checked the speaker connection and the connectiion seems to be perfect. Is there any lock in the system? Can someonetell me how to release the lock.

Mar 06, 2008 | Denon AVR-2802

1 Answer

Denon AVR 2802 - Unit Turning Off


If DIGITAL sign blink, this mean DSP board is defective. It will cut the sound on the AMP section. DSp is maybe defective.

Jan 12, 2008 | Denon AVR-2802

1 Answer

Also problem with Denon AVR-2802


If DIGITAL sign on the display blink, it mean the DSP board is defective. probably the DSP itself

Jul 22, 2007 | Denon AVR-2802

Not finding what you are looking for?
Denon AVR-2802 Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...