Question about Akai LCT2785TA 27 in. LCD Television
I am trying to use the HDMI port of my LCT2785TA with a Panasonic DMR-EZ47V. The TV shows no signal, not supported, with 480i or 480p in the top left corner. I have tried the DMR with another TV and the HDMI port works fine. Is this TV HDCP compatible? Is the HDMI port compliant with current specs? Where can I go to find out if these two items are compatible. How can resolve this issue?
I have tried 2 DMR's, , 2 different HMDI cables. The first cable has gold connectors , 19 pin , latest technology. The second cable had a bandwidth of 5 gig. I could not find a cable labeled ver. 1.1.
I have connected the DMR and HDMI cable to another flat panel TV with no problems. I have contacted Akia tech support not getting anywhere. They have stated that the HDMI port would only work with ver, 1.1 or 1.2 cable. I purchased the low bandwidth cable with no success. Akai now says that the HDMI port will accept the signal because it is coming from an HDCP device.
Help Help Help !
My Mac mini works via the HDMI port.
Posted on Feb 07, 2008
Akai Tv is not HDCP compatible. Nothing worked akai was not very helpful. This model , a 2006. aparently will not communicate will the newer HDMI devices.
RETURN SET IF POSSIBLE. NO SOLUTION FOR THIS PROBLEM!
Posted on Jan 04, 2008
This is a good one i had the same problem about a year a go on my brothers we tried every thing nout worked i said put the video leads in and do it it worked a treat but i have herd it don't work for all so it sounds like an amplifier my be needed hope any of this can help you. sorry if it don't only trying to help
Posted on Jan 03, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Any HDMI cable manufactured in the last couple of years should all be HDMI 1.1 compliant, your problem is most likely the logic board in the TV itself or the HDMI connector on the logic board has a bad connection..
Have you tried hooking-up a standard DB15 VGA cable to the AKAI TV and your laptop?
If this works your problem is in the TV and will most likely have to be repaired to receive the HDMI signal since your Panasonic DVR and your laptop are not recognized by the HDMI input on the TV.
Posted on Aug 28, 2009
Tips for a great answer:
Dec 13, 2015 | Panasonic DMR-EZ47V DVD Recorder/VCR
Dec 29, 2010 | Panasonic DMR-EZ47V DVD Recorder/VCR
Jun 03, 2009 | Akai LCT2785TA 27 in. LCD Television
Dec 28, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR
Nov 19, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR
Oct 09, 2007 | Akai LCT2785TA 27 in. LCD Television
1,609 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: