Question about Sennheiser RS 110 Consumer Headphones

1 Answer

Headphones Panasonic These headphones sit on a Transmitter Charger the light on the Charger is Green,When Headphones sit on Charger the Light is RED.this shows the headphones are charging,This is not happening, the headphones are not charging . Any Ideas Please ? thank you,

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

If these are older headphones it's likely that the batteries have gone bad or are defective, if this is a new unit, (aside from returning it for working one) it could still be the batteries, but the other likely issue is the charging unit is defective. you could test with a volt meter to see if it's getting juice. you could also have a short in the headphones somewhere.

Posted on Dec 03, 2013

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

JL Thompson

  • 155 Answers

SOURCE: No green On/Off light. Charge light is red. I hear only static.

Two things.. Check the batteries..
Also.. since these headphones have to have a signal sent to them to activate transmission (green light simply indicates they are receiving a signal) it can take a few moments after the signal begins to activate them.
I would hazard a guess that when you unplug the cables and then plug them back in.. the feedback that generates activates the base much the same as a regular audio signal would
Finally.. make sure the source is a fixed output.. if not.. and its variable..you will have to increase the output or volume to activate the base..

Good luck!

Posted on Apr 24, 2009

Anonymous

  • 1 Answer

SOURCE: Sennheiser Wireless Headphone Stops transmitting signal

I had the same problem when I plugged it into a new HDTV. The problem was that the sound on the TV was set too low. The transmitter has a feature that automatically turns off when the signal is off or too low. Try turning up the TV volume to a high/higher level and it should solve your problem. Using the headphone jack with the white input allows you to use the headphones while bypassing the TV speakers.

Posted on May 02, 2009

ializar

ializar

  • 1 Answer

SOURCE: power light blinks on both

.
Hello.
I have the same problem of blinking lights on both and no sound received...
Have you solved the problem ???
If the answer is yes can you tell ne something more through my mail ializar@hotmail.com ???
Thank you very much.
.

Posted on Apr 03, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headphones keep shutting off


There's an auto-shutoff feature which kicks in when the audio input to the transmitter is too low. That's usually indicated by the green light on the transmitter turning off. Just increase the volume on the device connected to the transmitter, and you should see the green light come back on. As long as that's on, it'll stay transmitting and shouldn't just shut off.

Nov 07, 2014 | Sennheiser Audio Players & Recorders

1 Answer

Work fine for about 5 minutes than change to static


There's an auto-shutoff feature which kicks in when the audio input to the transmitter is too low. That's usually indicated by the green light on the transmitter turning off. Just increase the volume on the device connected to the transmitter, and you should see the green light come back on. As long as that's on, it'll stay transmitting and shouldn't just cut out to static.

Jun 25, 2014 | Sennheiser RS 120 Consumer Headphones

1 Answer

I have a huge problem with these headphones (the Sennheiser HDR 120)... and my wife bought two of them... They have great sound on the computer, but once the green light turns off on the base? There...


The volume of the sound source (Mac) must be sufficient, otherwise the transmitter automatically turns off. Turn up the volume on the Mac, and turn down the volume on the headphones. There is no way to disable the Automatic On/Off function of the transmitter.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Aug 12, 2011 | Sennheiser RS 120 Consumer Headphones

1 Answer

No sound, when pick up Phones, the light on transmitter doesnot change to green, but remains still RED


Hello,

The green light will come on after you turn on the music on your computer.
So, after removing the headphones from the base, the green light will come on only if there is sound playing from the computer (It takes a few seconds to turn on).

Try it, it should resolve your issue.

If this doesn't work for you, please comment and let me know, and I will be more than happy to assist you to further resolve your issue.

I will appreciate your feedback and positive rating for this solution.
Thank you.

Oct 17, 2010 | Sony Audio Players & Recorders

2 Answers

My Freepulse headphone won't pair anymore. Both components charge, both both of them display the red LED light. I've tried the override button on the transmitter, and I've tried holding the power button...


You hold the button on the transmitter for about 50 seconds - light flashes red, solid red, goes off and then flashes blue and red. Then you can do the same on the headphones. Then wait and they should pair.

Jun 29, 2010 | Logitech FreePulse Wireless Consumer...

1 Answer

Defect headset


hold the transmitter button for about 50sec until it flashes blue/red quickly and connect the headset afterwards. Hope that helps. God bless.

May 30, 2008 | Logitech FreePulse Wireless Consumer...

2 Answers

Logitech wireless headphones


Trying re-syncing the transmitter and the headphones. Hold down the power buttons on both until they alternate red and blue blinking, worked for me and now they work just fine. Got that from the Logitech FAQ website.

Feb 27, 2008 | Logitech (980361-0403) Headphones

1 Answer

RCA wireless headphones


Hey, my rca whp141 is incredibly quiet. Go ahead and turn the volume up on the TV.
If that doesn't work make sure
  • The headphones and headset are on the same channel (like 1).
  • the transmitter is on and working (Power: GREEN LIGHT)
  • the headset is on and working (GREEN LIGHT)
  • the headset is receiving a signal (St: GREEN LIGHT).
Hope this helps.

Jan 08, 2008 | RCA WHP141 Consumer Headphones

1 Answer

Headphones has red light


Hello, I believe I just figured out the solution to this problem. I was experiencing the same thing, and as I was just showing my friend the problem I noticed that the green light came on after I turned on the music on my computer.

So, after removing the headphones from the base, the green light will come on only if there is sound playing from the computer (It takes a few seconds to turn on). It seems like they should have mentioned this somewhere in the manual...

Dec 04, 2007 | Sony MDR-RF970RK Headphones

Not finding what you are looking for?
Sennheiser RS 110 Consumer Headphones Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sennheiser Audio Players & Recorders Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

Rob Beech

Level 2 Expert

63 Answers

Geoff

Level 3 Expert

562 Answers

Are you a Sennheiser Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...