Question about Dryers

1 Answer

MAYTAG EPICZ DRYER ERROR CODE F-01 - Dryers

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 46 Answers

F01 means the main control board or "micro computer" has detected an internal short. Unfortunately, the only way to correct this issue is to replace the control board itself. It's under the top panel in the front right corner.

Posted on Dec 05, 2013

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
rickbrashear

Ricky brashear

  • 176 Answers

SOURCE: maytag dryer epicz says "controls

controls locked

This feature allows you to lock your settings to prevent
unintended use of the dryer. You can also use the Control Locked
feature to prevent unintended cycle or option changes during
dryer operation.
To enable the Control Locked feature:
Press and hold AUTO DRY LEVEL for 3 seconds. Control Locked
glows and a single beep tone is heard. To unlock, press and hold
AUTO DRY LEVEL for 3 seconds. The indicator light turns off.

Posted on Jul 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my Maytag Epicz model #MGDZ600TW2 not starting amd giving me an error code F01. What does it mean?


F01 is a control unit failure does this come up when you push the start button or did you go into diagnostic to get this code I have seen it come up as a false code check the start button does it spring back like all the other buttons if so replace control if not the button is broke

Jan 29, 2015 | Maytag Dryers

1 Answer

Why is my Maytag Epicz model #MGDZ600TW2 not starting and giving me an error code F01. What does it mean?


The F01 error code is typically a communication fault. You may have a defective main control board. Unplug the dryer or turn off the breaker to the dryer. Double check to make sure dryer has no power. Remove the screws holding the top on at the back of the dryer. Standing in front of the dryer push down and slide the top away from you then lift. With the top removed you will see a metal bracket on the left side housing a control board. Remove the control board from the bracket. You may want to take a picture to reference where the wires go. Remove the white cover of the control board then gently remove the control board from the white housing by pressing in the small tabs. If you see a black mark on the back side of the control board and the white housing replace that control board. According to your model number the main control board is part number W10111606.

Jan 29, 2015 | Maytag Dryers

1 Answer

F01 code on a maytag epic z dryer


Check your fuses first. That's all mine was when I did the have heat

Jan 18, 2014 | Maytag EPICz Electric Dryer

1 Answer

Need manual for Maytag EpicZ Washer and Dryer


Try in this link: maytag.com/webapp/wcs/stores/OCManualsLiterature

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Nov 16, 2011 | Maytag Washing Machines

1 Answer

My brand new maytag epic z keeps going into power failure. Error code PF. I tested our power and it never cuts out or trips the breaker. It must be in the dryer.


here is a website that will assist in troubleshooting what is wrong, Good Luck Tim says Whirlpool but it is the same difference :


http://www.advantagesupplyfl.com/WhirlpoolDryerFaultCodes.html

Mar 05, 2011 | Maytag EPICz Electric Dryer

1 Answer

My maytag Epic Z washer won't spin. Flashed F-01


f1 is a bad control board,you can try unplugging the dryer for like 5 minutes and then plug it back in,sometimes that will reset the board but most likely you'll have to replace the board.

Feb 12, 2018 | Maytag EPICz 6.7 Cu. Ft. King-Size...

1 Answer

F 21 error code? Maytag epic z washer


The F21 code on the Maytag EPIC is indicative of a pump problem. The pump impellers should be checked, there should be four of them. Sometimes the impeller blades can be broken by coins, or other items. Make sure that the pump is clear of debris, then remove the discharge hose, and blow through it.
If after clearing the initial slug of water, the hose doesn't blow free and clear, you have something stuck in there.

Nov 28, 2009 | Maytag EPICz Electric Dryer

1 Answer

"Maytag Epic z washer flashes f 24 error code"


I have a maytag epic z dryer and it wont turn on. it worked fine the last load, now nothing? help.

Apr 25, 2009 | Maytag EPICz Electric Dryer

2 Answers

Error code


I could not find error f01 for maytag, but for for whirlpool, it means CCM(central control unit) unplug washer for 2 minutes then try it.

Jul 12, 2008 | Maytag EPICz Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

1,430 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Marvin
Marvin

Level 3 Expert

85219 Answers

jimorris77

Level 3 Expert

411 Answers

Brad Brown

Level 3 Expert

18136 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...