Question about Panasonic AS-302NN Electric Stapler Heavy Duty Grey

2 Answers

Stapler malfunction stapler either jams or puts out two staples each time it is used. Any suggestions?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 32 Answers

Could be a small piece of staple jammed, allowing for further jams.

Posted on Feb 12, 2015

Ad

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

I don't know, but check how frequently the stapler jams.

Posted on Dec 10, 2013

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stapler isn't pushing staplers through


Open the staple tray and empty out the good staples. Using tweezers, needle-nose pliers or similar tool carefully pull out the jammed staple. The staple may break while it is being removed in which case you will need to repeat to remove each piece of the jammed staple. Check also, the spring to ensure it's not twisted or damaged.

Finally, fix in good staples and continue use.

Jun 17, 2018 | The Office Equipment & Supplies

1 Answer

What can I do to keep the stapler from jamming, and it is also not putting the staples in all the way?


You may be over filling the stapler, also make sure that you are using the correct staples. The fact that they are not going in all the way suggests that they are too long for the stapler. I hope this helps.

May 17, 2016 | Staples Tools & Hardware - Others

2 Answers

Someone loaded regular staples into our Swingline 45 Optima now it will not work when loaded with the correct staples.


Using the wrong or style ofstaples, overfilling the machine and stapling through too-thick materials can causeOptima to jam. Now follow these steps: 1. Holdthe base down as you lift the top of the Optima stapler to access the stapletray. 2. Removeall the staples from the tray so that you have access to the jammed staple. 3. Turnthe stapler upside down and shake it to clear out staples you can't reach withyour fingers. 4. Gripthe jammed staple with the needle-nose pliers and, while holding the staplersecurely, pull it up. 5. Twistthe staple until it breaks into two pieces if it will not pull straight out.Pull out the two individual pieces. The Optima stapler line bySwingline is designed to be jam-free when Optima premium jam-free staples areused. Using another , style or brand may cause frequent jamming. Hope thiswill help you. Good Luck.

Jul 21, 2011 | Office Equipment & Supplies

1 Answer

I have tried to reload the stapler but it will NOT staple What am I doing wrong?


1. Make sure you have the correct staples for the machine. This machine requires "standard" staples, which are 1/4" staples.

2. Check the staple cartridge to make sure there are no visible jams.

3. Check the power connection to the stapler. Is it plugged in? Is the plug working?

4. If you continue to experience problems, contact the manufacturer at
1-800-STAPLES. They will replace the stapler if it continues to malfunction.

Apr 18, 2011 | Staples One Touch High Capacity Stapler

3 Answers

I can't seem to reload staples into this stapler. I used the staples that came with it and it worked fine. I try reloading and it doesn't staple.


With the stapler sitting a solid surface, turn it 180 degrees so it is pointed away from you, and you are looking at the back. Press down on the plastic extension that you see (about mid-height on the stapler). This releases the staple-holding compartment (it shoots out the front of the stapler). Reload it with standard staples, push the compartment back in place until you hear a click. Voila!

Apr 15, 2011 | Staples One-Touch DX-3 Desktop Flat Stack...

1 Answer

An office dummy put regular staples in the Swingline 660HD stapler which is now jammed. I can't figure out how to open the stapler to get access to the staple tray. I can't pull them out with a large...


There's a rectangular opening at the front end of the stapler. You can insert a rod that fits in the opening, and push the staples back out if they're not hopelessly jammed in-place.

Feb 04, 2011 | Office Equipment & Supplies

2 Answers

My Swingline model 520e jams every other time I staple.


There were a few staples left in the cartridge when the stapler stopped working. I went thru all the steps on bottom for stapler after changing the cartridge with two different cartridges. It makes the noise and puts marks in the paper, but no staples come out of it.

Mar 18, 2009 | Staples Swingline® 36115 Staple Guns Tools...

1 Answer

Instructions on unjamming swingline electric stapler model 270; jam is at the front of the stapler; staplers come out either broken, flaten or crooked and does not secure document.


First, are you using the recommended staples for this stapler? Many heavy duty electric staplers don't use "standard" desk staples. Second, try unplugging the stapler, unloading the staples, and if possible, reach a couple of fingers into the stapler and try manually pushing up on the staple head to see if you can get the driver blade to come down. Does it come down smoothly, or does it seem like there is something stuck in there? If you aren't sure about disassembling the unit (my usual method-but I'd recommend having the parts diagram handy), try using a flashlight to look at the underside of the staple head, where the staples come out - can you see anything stuck in there? If so, you might be able to use a small knife blade or small dental pick to get jammed staple pieces out.

Mar 03, 2009 | Staples Swingline® 36115 Staple Guns Tools...

1 Answer

AS 300 electric stapler--pulled out jammed staples but even though it staples, it won't grab the staples (staples as though empty)


What has most likely happened is part of a staple is stuck in the front portion of the stapler where it forms the staple and presses it into the stapler.
You would most likely have to remove the stapler, and remove the binding staple from the stapler head.

Sep 28, 2008 | Panasonic Office Equipment & Supplies

Not finding what you are looking for?
Panasonic AS-302NN Electric Stapler Heavy Duty Grey Logo

Related Topics:

725 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6862 Answers

Shannon Murphy

Level 1 Expert

2 Answers

Are you a Panasonic Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...