Question about Sharp LC-26SH10U 26 in. LCD Television

Open Question

LC-26SH10U Problem- The tv will not acknowledge a signal through the HDMI input. I've tried a sony blu-ray player, and a ps3 with no luck. I tried the ps3 through the rca jacks with no luck. My Wii wi

The tv remote works with tv as well as all buttons on the tv. It seems as though any source trying to display from an HD device goes unacknowledged. That may not matter though.

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 103 Answers

SOURCE: Sharp LC-37D4U 1080i picture problem

have the cable company set the box to 720p whic is the native resolution of the set.this will help with quick signal adjustment

Posted on Mar 22, 2007

Ad

Anonymous

  • 10 Answers

SOURCE: Sharp Aquos 37" Audio Static Issue when watching DVDs

i have had to replace the hdmi input board on these units to fix them.

Posted on Jan 08, 2009

Chi Chu

  • 8457 Answers

SOURCE: sharp aquos no sound through hdmi

Reset all audio factory setting.Tries unplug,replug it well work,if ur backlight video board it still good.

Posted on Dec 17, 2009

Testimonial: "worked like a charm thank you so much, i was about to throw in the towel and get a new tv, now i don't have to thanks again"

trevorgale

  • 1 Answer

SOURCE: Flickering screen (LC-52SB55u) with HDMI

Do a quick google for this on the AVForums site where you'll find numerous threads covering this problem. First, select the HDMI input before turning on the blu ray player. The handshake over HDMI is the problem. I have the same problem with a Technika blu ray which is fine on my other TVs.
If this doesn't solve it then you ned a firmware update which can be downloaded from Sharp's website and installed using a USB pendrive or by PCMCIA card from Sharp if you have an older model with a rocker on off switch and no USB update port on the back of the TV.

Posted on Jan 09, 2011

GAJim

  • 1 Answer

SOURCE: sharp model LC-32SH12U - 2

I don't have a solution but starting 2 weeks ago I have the exact same problem. Test different devices and cables and it points back to the TV. Anybody have a solution?

Posted on Feb 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does no media device mean?


Rehashing some posts from another site:

Look in the manual that came with the TV.
It will tell you that you are trying to get a signal from a device that is NOT hooked up to your TV. You probably need to go to 'Input' with your remote, and work it so the 'Input' shows Cable, or Satellite, or DVR or whatever sends the signal to your TV.
The TV is smart enough to know there is no signal coming from the currently selected input.

so try pressing the "Source" button on the remote. Look on the left top corner of the TV for a box choices HD, HD I and TV, etc. Select the appropriate input.

Good luck!

Oct 21, 2017 | Audio Players & Recorders

2 Answers

Monitor goes black - green light stays on


My screen is black, why do I not have a picture?
Answer Antenna is not hooked up to television.
  • Make sure that the antenna cable is correctly connected to the television. If it doesn't work there appears to be no signal.
Problem is caused by television broadcast
  1. Push 'INFO' button.
  2. If the screen shows channel number (1, 2, 3, etc) try another channel. Not all channels broadcast at all times.
  3. You may have a signal problem. Contact cable provider or local broadcaster regarding the specific channel.
Television is in EXT or SIDE mode, and there is no external source provided, so screen mute (black screen) is activated.
  1. Push NEXT SOURCE button on the remote.
  2. On the screen appears all sorces.
  3. Press the UP button to switch to the TV mode.
If you are using an accessory device (DVD, DVR, or VCR), be sure the device is on and running.
Blank screen when connecting to the accessory (DVD, STB, PC) device via HDMI to HDMI.

Answer
  • Make sure the cable is well connected .
  • To check which connection is selected, Press the i+ button on the remote control.
  1. When you see Blue mute / blank screen and the i+ display does not indicate any video resolution indication then there is no valid signal detected.
    • Make sure the HDMI output of the accessory is valid by changing the video output resolution to a resolution which the TV can handle.
  2. When you see a blank screen and the i+ display shows a video resolution indication then the connection is correct.
    • The blank screen is caused by the accessory device and not by the TV.
    • To detect and remedy the problem caused by the accessory device, check the instruction manual of this device.
  3. If the problem remains : reselect the HDMI external source input by changing to the other HDMI input and back to the connected HDMI :
    1. Press AV on the remote
    2. Press up and then ok
    3. Press AV again
    4. Press down and ok
    5. The compatibility check process between TV and accessory device will start over again.
  4. Reset (switch off and back on) the TV and also reset the accessory device.

Mar 05, 2008 | Philips 42PF9630A 42 in. Plasma Television

1 Answer

Tv does not respond to any input only shows nosignal to any device


Did the TV's source get changed? If you use the Television remote and find the source or input button which switches between the video sources for your TV such as HDMI, A/V, Television Tuner,, VGA connector or Component video. If your using a cable box that remote only controls the cable box and possibly the TV power and volume but the cable box remote does not change the source input of the TV. Most Cable boxes rebroadcast their video on a specific TV channel and your TV must be set to that channel to receive the signal from the cable box. Let me know if this helps you out.

Aug 20, 2014 | Televison & Video

3 Answers

PS3 Connection problem with this particular tv model.


connect PS3 to Tv with RCA cables (white,red,yellow) go to display settings change to HDMI, Tv should go black remove RCA cables and connect with HDMI.

Jan 10, 2018 | Samsung LE22B450 22 in. HD-Ready LCD TV

1 Answer

When I connect my hp laptop to my spectroniq hd tv the screen goes black on both devices and nothjing plays how can i get it to connect properly


I a feeling that your computers screen is blank because it is displaying to the TV and the TV is blank because it is on the wrong input. Your TV/remote should have an input or source button which you can use to select the appropriate input.

Mar 02, 2012 | LG 32LG30 32 in. LCD HDTV

1 Answer

My tv is a hitachi hd ready flat screen plasma tv and i am using universal remote control The tv was working fine until i swtiched it off and hit one of the buttons on the remote - possibily the av...


What are u using for a signal source? Cable, Satellite, Over the air? My best guess is that you hit a wrong button such as the "source" button and the remote doesn't know what device you are wanting to opperate. Press volume up then down and see what light lights up?
If it is other than "TV" then you probably have the wrong device selected... Hope this helps... Sincerely HDTV GURU JAY

Mar 15, 2011 | Hitachi Televison & Video

1 Answer

Remote control not working with tv


The remote control is an acess to the TV device for example only from a distance. A remote controll for functionality would require to insert batteries a power source making possible communiction with devices requiring reception transmittion of signals. The remote is handheld pointed to the direction of TV requiring signal before button pressed woudl achieve response. a common button to start the remote control experience is pressing on the power button, that displays a signal on the TV. The TV should momentarily produce a sound and lighting effect,, and displaying on the dark screen a light blue screen. The initial signal response from remote control to TV indicates devices are functioning as required. Additional buttons on the remote controll could perform functions of several available.
The remote control has master button, menu on which every additional function is deriveable. Once the menu button is pressed with remote pointed in the direction of TV, should dicplay a list of options on the blue screen already established by power button. Every additional remote control device functionality is achievable by only after the first two buttons have been powered and pressed to display option results on a screen of TV. The remote controll buttons remaining perform complementary functionalities. For example, the arrow keys on remote control make movement of the options displayed on the screen, where a comfrimation button or identified as select allows to confirm remote functions displayed on the screen. A remote control could have several functionalities only accessible once made to display in screen. The three most common buttons on a remote control are First power button that powers on the TV, menu button that displays a list of functionalities on the powered on bl;ank blue screen, and using the arrow buttons on the remote would moves an indicator arround the screen area options. The selection button makes confrimation of the option.

Dec 02, 2010 | Philips Televison & Video

1 Answer

Polaroid FLU-2632 LCD TV full HD 2 HDMI problem


You could try pressing the source button on the remote to see if that brings it up.

Also the TV may have got itself in a muddle. There will be a way to reset it to factory setting. If you can get into the TV's setup menu there ought to be an option buried somewhere to do that.

Apr 28, 2017 | Polaroid FLM-2632 Television

2 Answers

Magnavox 15mf605t/17 15'' LCD HDTV won't turn on


Have similar TV. If it is set to the PC source, it goes into standby when there is no signal, like a regular monitor. Even though the monitor is in standby, you can still press the Source button to change to, say, HD input, and will use the familiar on/off action when pressing Power on the remote.

A little weird, but I've gotten very used to it.

Mar 15, 2009 | Philips Magnavox 15MF400T 15 in. LCD...

1 Answer

Samsung lcd hdtv won't receive signal from fios hd receiver


Hey nothingsfree,

You may not necessarily have anything incorrectly set up, but there are a couple of things that I would suggest trying.

First, you'll want to make sure that your TV is set to the correct input source. Some TV's will require that the input source be changed in order to display any signals from an external device, like your HD-DVR. This can typically be done by accessing the main video menu using your remote control.

According to information provided by the manufacturer, you should be able to change the input source for this model TV (Samsung LN46A750) by doing the following:

* Press the "Menu" button on your remote control
* Press the "Up" or "Down" arrow button to select "Input," then press "Enter"
* Press "Enter" to edit the "Source List"
* Highlight the signal source for the HD-DVR, and press "Enter"

Next, you may want to try updating the TV's firmware. In some instances, simply updating a TV's programming can eliminate any potential hardware or software conflicts between two devices. To update the TV's firmware you will need access to a computer and a USB flash drive. Step-by-step instructions and the firmware update itself are available through the following website:

http://www.samsung.com/us/support/download/supportDown.do?group=televisions&type=televisions&subtype=lcdtv&model_nm=LN46A750R1F&language=&cate_type=all&dType=D&mType=FM&vType=L&prd_ia_cd=02010100&disp_nm=LN46A750

Make sure to read all the warnings and disclaimers available though, as your TV may already have a more up-to-date firmware version than the one that can be obtained through Samsung's support page.

Should neither of these address the issue, you may wish to see if connecting your HD-DVR to a different HDMI input solves the problem. Much like computers, TV's have been occasionally known to have faulty inputs or loose internal connections.

If all else fails, I’d suggest contacting the manufacturer for further assistance. In many cases manufacturers are able to provide over-the-phone troubleshooting support, in addition to having access to a wider variety of possible remedies for hardware problems.

Hope this helps you out.

Sincerely,
Aaron
Go Ahead. Use Us.

Jun 22, 2008 | Televison & Video

Not finding what you are looking for?
Sharp LC-26SH10U 26 in. LCD Television Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Cindy Wells

Level 3 Expert

6065 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...