Question about Hobart HL200C Mixer

Open Question

Transmission Oil Nomenclature #

I'm in need of the Nomenclature # for a Hobart A200 to be able to order some.

Posted by on

Ad

5 Suggested Answers

paultech8226

  • 109 Answers

SOURCE: I have oil coming from the front of a hobart a200

If you have oil leaking from the attachment hub, the transmission grease has liquified. The transmission will need to be opened so the old lubricant can be removed, by scooping it out. There aren't any seals in the attachment hub, just two torrington needle bearings. The helical gears thrust the pinion gear onto a thrust bearing in the hub to create a seal. The hub has a return hole in it's casting for excess lube to return internally. It's possible the return hole is restricted. On the other hand, if the machine has been filled with oil, it will probably leak like a siv.
The new lube should be 35 OZ of mobil XPH 222,
Hobart part number is 103881-47 for 32OZ.

Posted on Aug 08, 2009

Ad
bigg t

anthony james

  • 640 Answers

SOURCE: Hobart A200

amy, depending on how old your mixer is there are 2 types of clutches for 1st gear.these could be your problems--a key is sheared on the shaft--shaft/gear is broken.the bottom part of the mixer where you put on the attachements is called the planetary,does it look like it has moved down?you could tell if the dough hook,wire whip,ect,ect is hitting the bottom of the bowl.if this is the case its just simply tightening the 2 nuts next to the beater shaft.if this is not the case you would have to dissasemble the transmission.let me know.

Posted on Jan 12, 2008

Ad
bigg t

anthony james

  • 640 Answers

SOURCE: A200 Mixer/Medalist L120 Mixer by Hobart

Where is it leaking grease from?Im a hobart tech and service these mixers.When i go into work i will get you the part # for the grease.You would then have to contact your local hobart branch,tell them the part # and pick up the grease.

Posted on Feb 25, 2008

doobo67

  • 49 Answers

SOURCE: hobart A200 oil leak

grease coming out the planitary on bottom normally means it needs taken apart completley cleaned out of old grease and new seal and newer stile spacer seal goes around with the O-ring on it. and factory grease. the noise impossble from here to tell.

Posted on Sep 30, 2008

Anonymous

  • 1 Answer

SOURCE: Manual for Hobart Mixer A200

You can go to hobartcorp.com and register for free then you can print or download a parts
manual to help you to do repair. Hobart provide service manual to their technician only.

Posted on Jan 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hobart A200 Noise


After viewing and listening to your video, my first guess would be bad bearing(s). The sound varies with the speed of the agitator, so the noise is at the speed of the transmission shaft or planetary area. These mixers use very common standard bearings. As such, they are available very reasonably from sources OTHER than Hobart. You will need to take the transmission apart in order to find and solve the problem. Study the parts manual in detail. It seems complicated, but once you understand it, it is logical. I highly recommend that you get a really good understanding of how it works and goes together before you start taking it apart though.

Nov 02, 2012 | Hobart A200 Stand Mixer

1 Answer

Hello, my Hobart AE200 seeps oil from the front panel. How do I top it up? How often does the oil need replacing and with what type of oil? Thanks


It's not oil in the A200, it's #2 weight grease. Although when it gets old enough it can break down far enough to basically become oil (either that or someone put oil in it previously). There are a number of answers written on fixya.com explaining how to disassemble the transmission and change the grease. Fill with 36 ounces #2 grease. FYI : disassembling the transmission and changing the grease is a very messy task and one can VERY easily reassemble the transmission incorrectly, so consider bringing the mixer to Hobart to have the job done.

Aug 17, 2011 | Hobart A200 Stand Mixer

1 Answer

Oil (or maybe broken down grease) leaking from the accessory hub of Hobart mixer.


You're right, it's broken down grease. The A200 doesn't have a rubber seal to prevent this from leaking, either. That's normally OK, when the grease in reasonable condition, but when it breaks down bad enough, you see what you're seeing. The grease needs to be changed which requires disassembly of the transmission. It's quite a job (and very messy) if you're not familiar with it, but if you're interested I know I've read (and may have written one) instructions on disassembling the transmission on this website. If you decide to do the job yourself, be sure to remove the attachment hub (comes out to the inside of the transmission) and clean the passage well.

Jun 09, 2010 | Hobart A200 Stand Mixer

1 Answer

I have oil coming from the front of a hobart a200 mixer,What to look for? and what kind of oil?


If you have oil leaking from the attachment hub, the transmission grease has liquified. The transmission will need to be opened so the old lubricant can be removed, by scooping it out. There aren't any seals in the attachment hub, just two torrington needle bearings. The helical gears thrust the pinion gear onto a thrust bearing in the hub to create a seal. The hub has a return hole in it's casting for excess lube to return internally. It's possible the return hole is restricted. On the other hand, if the machine has been filled with oil, it will probably leak like a siv.
The new lube should be 35 OZ of mobil XPH 222,
Hobart part number is 103881-47 for 32OZ.

Aug 04, 2009 | Hobart A200 Stand Mixer

1 Answer

My a-200 mixer works fine in 1st & 3rd very poorly or not at all in 2nd. Whats up and is there a easy fix.


Sounds like a key may be sheared on the transmission shaft.You will need to disassemble the transmission in order to repair.If your mechanically inclined i can step you through it.I'm a hobart tech and repair these mixers often.

Apr 09, 2009 | Hobart A200 Stand Mixer

1 Answer

A-200 mixer oil leak


the trans uses all grease today hobart uses mobil lith aw-2 you can get the seal from any hobart office.

Oct 19, 2008 | Hobart A200 Stand Mixer

1 Answer

Hobart A200 oil leak


grease coming out the planitary on bottom normally means it needs taken apart completley cleaned out of old grease and new seal and newer stile spacer seal goes around with the O-ring on it. and factory grease. the noise impossble from here to tell.

Sep 10, 2008 | Hobart A200 Stand Mixer

2 Answers

Servicing Hobart A-200


these mixers dont use oil,they use grease.you will have to open the transmission to change the grease.any ? let me know im a hobart tech.

Jan 25, 2008 | Hobart A200 Stand Mixer

1 Answer

Hobart a200


will it move in any speed,i need to know this in order to troubleshoot your problem.im a hobart service tech and i service these mixers alot.

Nov 13, 2007 | Hobart A200 Stand Mixer

Not finding what you are looking for?
Hobart HL200C Mixer Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1364 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...