Question about KDS K717s 17" LCD Monitor

Open Question

Cable vga 13 pin diagram - KDS K717s 17" LCD Monitor

Posted by Anonymous on

Ad

1 Suggested Answer

Manikandan Raj

  • 825 Answers

SOURCE: i am trying to find the color and pin code chart

db15hd this side is the one you do not alter!!!
1)brown
2)red
3)orange
4)salmon
5)yellow
6)dark green
7)light green
8)dark blue
9)NC
10)light blue
11) purple
12)grey
13)white
14)black
15)brown/black

DB15 Female
7)light green
2)red
11)purple
13)white
1)brown
6)darkgreen
8)dark blue
10)light blue
3)orange

Posted on Apr 20, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

VGA PIN


pin no 1 - Red colour signal (Red colour wire)
pin no 2 - Green colour signal (Green colour wire)
pin no 3 - Blue colour signal (Blue colour wire)
4&5 Not connected
pin no 6&7&8 are (Grounds)RGB Returns
9&10 NC
pin 13 Hohizontal sync signal
pin no 14 vertical sync signal
Not nessasry other pins

Jul 17, 2009 | LG Studioworks 700S 17" CRT Monitor

1 Answer

Scheme for the VGA Cable of Acer AL1511eb


You will have to buy a 13 Pin Din Male Connector cord. Use the break-down below to help with reconfiguring.

Pin 1 RED Red video Pin 2 GREEN Green video Pin 3 BLUE Blue video Pin 4 N/C Not connected Pin 5 GND Ground (HSync) Pin 6 RED_RTN Red return Pin 7 GREEN_RTN Green return Pin 8 BLUE_RTN Blue return Pin 9 +5 V +5 V DC Pin 10 GND Ground (VSync, DDC) Pin 11 N/C Not connected Pin 12 SDA I²C data Pin 13 HSync Horizontal sync Pin 14 VSync Vertical sync Pin 15 SCL I²C clock

Nov 24, 2008 | Computers & Internet

3 Answers

LG 17'' LCD Monitor VGA 15 pin connector pin diagram


pin no 1 - Red colour signal (Red colour wire)
pin no 2 - Green colour signal (Green colour wire)
pin no 3 - Blue colour signal (Blue colour wire)
4&5 Not connected
pin no 6&7&8 are (Grounds)RGB Returns
9&10 NC
pin 13 Hohizontal sync signal
pin no 14 vertical sync signal
Not nessasry other pins

Nov 17, 2008 | LG Studioworks 700S 17" CRT Monitor

1 Answer

Mag monitor signal cable faulty


look into the 15 pin vga connecter care fully you will look numbers 1 to 15 which is very small it configration is as follows

1)red
2)green
3)blue
4)gnd
5)gnd
6)r return
7)g return
8)b return
9)5v from vga card
10)stand by
11)sync gnd
12)Sda(serial data)
13)Hsync
14)Vsync
15)Scl(serial clock)
at another end same letters will see take continuty and join new cable

Nov 10, 2008 | Mag Innovision InnoVision 996PF (White) 19...

3 Answers

Projector Cable


Found a pin-out at: http://www.diyaudio.com/forums/diy-projectors/78108-ezpro-550-rgb-cable-pinout.html
1 2
2 5
3 9
4 No conectar
5 14
6 1
7 6
8 13
9 15
10 11
11 no conectar
12 No conectar
13 3
14 12
15 No conectar

You probably need to have a special cable made up.

Jun 24, 2008 | CTX Optoma EzPro 600 Multimedia Projector

1 Answer

Still seeking db15 pin-outs for a samsung AQ17LS7LK


Here is the wiring colors for the VGA cable:
1- Red
2- Green
3- Blue
4- NC
5- Gray Shield
6- Red Shield
7- Green Shield
8- Blue Shield
9- NC
10- Violet
11- NC
12- Orange
13- Gray
14- Yellow
15- White

Apr 14, 2008 | Samsung SyncMaster 750S Monitor

1 Answer

13pins "from the inside monitor" "to the VGA 15 pins connector


hai dear,
i checked your problem and found that you open the cover of monitor and you find the two jack of data cable in main pcb and neck card( 2 connector of data cable).plz you cut the connector of data cable and you will find 8 wires in connector.related red(invild extra ground),green(invild extra ground),blue(invild extra ground),black gnd,white,orange,gold(extra gnd) and now you cut the red wire, you will find two wires.so you refix the main red wire pin no-1 of connector and red gnd pin no-6,green main wire pin no-2 and green gnd pin no-7,main blue wire pin no-3 and blue gnd pin no-8.check for the horizental sync and vertical sync wire you should go in main pcb which invild the other connector. there is present in print, h- sync(two wire of h- sync main wire in pin no-13 and other pin no-5) and ver.-sync wire in pin no-14.first you will check the whose h-sync and vert-sync in color and now finally other wires will fix any pin of connector.

Apr 03, 2008 | SAMTRON 55V 15" CRT Monitor

1 Answer

13pins "from the monitor" "to 15 pins VGA connector"


You will have wires of 7 colours. Solder it as per the data below...

White 7
Red 6
Black 10
Yellow 9
Blue 12
Green 1
Brown 13

The pins are numbered as follows

4 3 2 1
8 7 6 5
12 11 10 9
13

Apr 02, 2008 | SAMTRON 55V 15" CRT Monitor

Not finding what you are looking for?
KDS K717s 17" LCD Monitor Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top KDS Computers & Internet Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

Siul Oyaratgam

Level 2 Expert

317 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a KDS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...