Brother mfc j420w printer

6ya staff

• 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

SOURCE: My Brother Printer (model MFC-290c) and ink

On your printer take a look on the "ink management button"press it then look for cleaning using the arrows up and down then press ok or set or what ever the command the printer will display just try to perform head cleaning.try for several times lets say 4x don't clean too much it might ruin all other color if it has no changes try to bring it to a service center,they can soak it to a chemical solution,the head is clog.

Posted on Sep 10, 2009

SOURCE: My MFC 5890 cn Brothers printer paper keeps getting jamed and won

Hi there,

What kind of paper are you using?

Normal paper or Photo Glossy paper?

If you use Photo Glossy Paper, you have to put at least two sheets of paper. If you read the photo glossy paper instructions that came in the package you will see it.
The package brings one sheet more than mentioned because of this specification.

Posted on Sep 17, 2009

SOURCE: brother mfc-490cw won't print. sounds like it's

Does the Brother have a print utility, verifying cartridge levels?
You said you printed 40 pages?
Was there a lot of coverage per page?
You know that ALL printers only ship with STARTER cartridges, might want to check that first.
Does it not print black or color also?

Posted on Dec 01, 2009

Aparajita Batabyal

• 3513 Answers

SOURCE: I have an error message, Brother MFC-8640D Printer

Hi,

NO PAPER MP
Load paper into the Multipurpose (MP) Tray There is no paper on the Multi-purpose tray. Load paper onto the Multi-purpose tray.

http://welcome.solutions.brother.com/BSC/public/eu/eu_ot/en/faq/faq/000000/002100/000073/faq002173_005.html?reg=eu&c=eu_ot&lang=en&prod=hl3260n_all

Thanks

Posted on Jan 15, 2010

SOURCE: brother MFC-465CN printer Error code 51 unable to print

Usually this is caused by a foreign object or debris under the printhead path, or under where the printhead "parks."

Unplug the machine. Open the cover. Check the printhead path for little bits of paper, push pins, paperclips, staples etc. Note the location of the printhead.

If the printhead is at the far left, gently slide it towards the center (do not force it). Look carefully under where the printhead was stopped for debris. Use a flashlight if necessary.

Close the cover. Plug in the unit. Try again.

Posted on Jan 21, 2010