Question about Integra Audio Players & Recorders

1 Answer

Integra dtr 20.3 receiver. no sound from any comp onents

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 137 Answers

You have a defective processor pcb assembly and it must be changed.

Posted on Feb 19, 2015

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 9 Answers

SOURCE: Low to no volume output from Integra DTR-5.2 receiver

most higher end integra's have a input level adjusment or input selection for each and every input. Perhaps you are not on the correct input, go to onscreen programming and check out the input level and input select - also try the tape in another input like tape 2 or cd. It will not hurt the receiver for a test. Also, if you are using the cheap cables from the manufacturer - try a pair of cables that you know work or go by some. BTW, you don't need to spend $40 for cables order them online through amazon or other store. Gold / sliver plated oxygen free are best.

Posted on Jun 30, 2009

Anonymous

  • 33 Answers

SOURCE: I have an integra dtr 7.7 receiver which when

obviously a short somewhere in the system....

you know what i would do?
pray to god you are still under warranty! XD
its a beautiful machine....

Posted on Jan 08, 2010

walesarumi

Walesarumi

  • 6993 Answers

SOURCE: Integra dtr-6.3 receiver: Red standby light

Hello,

your receiver is having a power problem. The power supply board is defective that's why the receiver won't power up. Its receiving power but it cannot transfer the current to the necessary part of the receiver because a capacitor, diode, etc may have been faulty. Until these bad components are replaced, the capacitor might not come on.

This may have occurred as a result of power surge/irregular power supply/excess power supply entering into the unit. This is usually common with receivers and electronics as a whole.

If you know about electronic repairers, I would suggest that you open the receiver and read the power board/panel with a meter, detect the bad component and replace it.

But f you don't know about electronic repairers, take the reciver to the nearest repairman to fix the fault for you.

I wish you good luck.

Posted on Dec 02, 2010

dunnbiker

David Dunn

  • 8546 Answers

SOURCE: I have a Integra receiver

NO sound at all? That would be odd as its internal FM receiver is independent of any user connections. I'd work on getting FM to work first, then move on to more complex issues.

The manual is here:

http://www.retrevo.com/support/Integra-DTR-6.6-Receivers-manual/id/550ag000/t/2/


To reset the AV receiver to its factory defaults, turn it on and, while holding down the [Video 1] button, press the [Standby/On] button. "Clear" will appear on the display and the AV receiver will enter Standby mode.

Posted on Dec 26, 2010

AJIN G

Electro Med Services

  • 6694 Answers

SOURCE: my integra dtr 5.6 receiver

hi,
As you have mensioned it should be power supply problem. You have to check the voltage regulators at it power supply satge. it should need a good electronics servicing skill to find out the exact problem. if you are not experienced in it, then i will prefer you to consult some one more experience in it for such a costly system.
ok

Posted on Jul 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am not getting any audio (sound) out of my Integra DTR 4.6. Any suggestions?


Does the vu meter show anything(bars moving up and down when audio is present?If so you may have a blown fuse or bad IC in the amplifier section causing the problem. If there is no indication of audio on the front panel it would be a Microprocessor problem

Oct 15, 2014 | RCA Onkyo Integra Dtr-4.6 Av Receiver Wrat

1 Answer

"handshake" between DTR 5.9 and an LG Blu-ray player


You will have a defective processor pcb. You may want to see if you can get Integra to give you a one time repair on this.

Mar 26, 2014 | Integra Onkyo Rc-711m Dtr-4.9 / 5.9...

1 Answer

Integra DTR-5.6, no sound for am/fm tuner


reset receiver if that does not work You will have a defective processor pcb

Aug 24, 2013 | Integra DTR 5.6 Multi Media Amp

1 Answer

I have a Integra receiver model number DTR 66 and I have no sound. it appears to have everything connected and should be working. I would like to know how to reset the receiver or what steps do I need to...


NO sound at all? That would be odd as its internal FM receiver is independent of any user connections. I'd work on getting FM to work first, then move on to more complex issues.

The manual is here:

http://www.retrevo.com/support/Integra-DTR-6.6-Receivers-manual/id/550ag000/t/2/


To reset the AV receiver to its factory defaults, turn it on and, while holding down the [Video 1] button, press the [Standby/On] button. "Clear" will appear on the display and the AV receiver will enter Standby mode.

Dec 26, 2010 | Audio Players & Recorders

1 Answer

Low to no volume output from Integra DTR-5.2 receiver


most higher end integra's have a input level adjusment or input selection for each and every input. Perhaps you are not on the correct input, go to onscreen programming and check out the input level and input select - also try the tape in another input like tape 2 or cd. It will not hurt the receiver for a test. Also, if you are using the cheap cables from the manufacturer - try a pair of cables that you know work or go by some. BTW, you don't need to spend $40 for cables order them online through amazon or other store. Gold / sliver plated oxygen free are best.

Jun 30, 2009 | Integra DTR-5.2 Receiver

1 Answer

No sound from speakers from components with Integra 6.9 receiver


Turns out it had to do with one of the settings for the new Blu-Ray player.
Thanks anyway.

Jan 17, 2009 | Integra DTR-9.1 7.1 Channels Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

1,771 people viewed this question

Ask a Question

Usually answered in minutes!

Top Integra Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76171 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you an Integra Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...