Question about Magic Chef 31000 Gas Kitchen Range

Open Question

Magic chef model 3121 wrv timer won't stop beeping

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: magic chef beeping

You need to replace the touchpad. I'm just getting ready to replace mine for the second time in 14 years. A bit pricey but not a hard repair to make.
An appliance repairman told me that it's possible to peel the old pad off and carefully fish the connecting wire out to the point where it plugs together. This would save removing the burners and the stovetop I'm going to give it a try when mine arrives

Posted on Aug 26, 2008

Ad
localwonder

Michael Masters

  • 6784 Answers

SOURCE: Magic Chef Oven 3888VRA beeps and shows F-1.

Hi this is indicating a Defective touch pad or clock (ERC).

This simple test will help determine whether the ERC (Electronic Range Control board or Clock) or the touch pad is defective when F1 error code is present. Follow carefully, and with caution.

Note: Some models incorporate the touch pad in to the ERC as a single assembly, in which case this test is not necessary. Simply replace the ERC (Clock).

Warning: Do not preform this test if you feel as if you are not qualified to do so. Contact your local service depot, if needed.

1. Disconnect power to the range (unplug the range power cord or turn the power off to the range at the circuit breaker). It is very important that the power to the range has been disconnected, so please double check before continuing.

2. Gain access inside the control panel.

3. Disconnect the touch pad (also called keypad or membrane switch) ribbon from the ERC.

4. Make sure there are no lose wires, or anything else that may cause a short when power is turned back on. Assemble the control panel back the way it was.

5. Turn the power back on.

6. Wait for at least one hour to see if the F1 code comes back (usually accompanied by a beeping sound).

7. If F1 comes back, replace the ERC. If it does not, replace the touch pad.

Posted on Nov 17, 2009

localwonder

Michael Masters

  • 6784 Answers

SOURCE: Magic Chef Electric Range F1 code won't stop

Hi. this is referring to a Defective touch pad or clock (ERC). This will need to be corrected. Normally, you will need to, simply, replace the main control Board(ERC).

Follow this testing procedure to confirm the damage.

This simple test will help determine whether the ERC (Electronic Range Control or Clock) or the touch pad is defective when F1 error code is present.

Note: Some models incorporate the touch pad in to the ERC as a single assembly, in which case this test is not necessary. Simply replace the ERC (Clock).

Warning: If you feel in any way uncomfortable performing this test or making this repair, please contact a qualified appliance repair technician.

1. Disconnect power to the range (unplug the range power cord or turn the power off to the range at the circuit breaker). It is very important that the power to the range has been disconnected, so please double check before continuing.
2. Gain access inside the control panel.
3. Disconnect the touch pad (also called keypad or membrane switch) ribbon from the ERC.
4. Make sure there are no lose wires, or anything else that may cause a short when power is turned back on. Assemble the control panel back the way it was.
5. Turn the power back on.
6. Wait for at least one hour to see if the F1 code comes back (usually accompanied by a beeping sound).
7. If F1 comes back, replace the ERC. If it does not, replace the touch pad.

Posted on Nov 25, 2009

meztang

meztang

  • 112 Answers

SOURCE: i have a magic chef oven model # 61S04PAW. the

Electric gas igniters sometimes get stuck in one position causing a clicking sound. The clicking sound that you hear is the electric arc that is pulsing from the igniter conductor (wire) to ground (the gas burner). It receives power from the electrical outlet that the stove is plugged into.
Residue from food and sometimes cleaning products may be preventing the igniter from producing a spark (Arc) to the base of the burner. This is a common problem that occurs when the stove has been cleaned or food is allowed to build up. Make sure that the igniter and the burner base are clean and dry. This will help with proper operation. Oven cleaner and a small tooth brush may be used to accomplish this. Another problem with ignition may occur if you have too little (touching) or too much space between the igniter and the base of the burner; it will prevent the burner from igniting. You should only have a little more space than the thickness of a nickel between the burner base and the igniter. A good “blue” arc from the igniter to the burner base is optimal. If this doesn’t work, you may need to replace the electric igniter module. Good luck.

Posted on Jul 18, 2010

Jemalyn Labaguis

  • 794 Answers

SOURCE: F-7 and beeping is occurring on my Magic Chef,

Hi sixgunromeo,

The error code F7 means that the Function key is shorted or stuck. TO fix this error, replace touch pad or if touch pad is part of the clock, replace the clock (ERC).

Hope it helps.

Thank you for using FixYa.

Posted on Sep 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my magic chef oven, model 34HN-3TKXW, keep beeping and sowing -f1-


Hi,

Your clock has failed and would need to be replaced, part number is 7601P155-60 but I was unable to find one for you. Maybe you will have better luck. Common rule is after 8 years they stop production of parts so I hope you get lucky in your hunt. Good Luck

I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

Aug 06, 2014 | Magic Chef Ovens

1 Answer

C clock will not stop buzzing. 15 year old magic chef oven. do not know model number because manual does not identify it. the only thing I have is a number at the bottom of the installation manual. Not...


Beeping from ovens is an indication of function buttons in user. Observe the entire feature function either as cooker still in operationality where beeping is warning as haven been completely secured from functionality. Refer with an expert with condition over impressive.

Mar 01, 2011 | Magic Chef Ovens

1 Answer

Using the oven with timer and how operate


Hi, you need the correct model number for your magic chef range/oven and repost, or go direct to magic chef's literature website: http://shared.whirlpoolcorp.com/product_literature/search.jsp?siteCd=MCF

Dec 11, 2010 | Magic Chef 31000 Gas Kitchen Range

1 Answer

1989 Magic Chef gas range digital display keeps beeping and says


This is a common failure in the control board. Here is an article that discusses the details.

http://www.fixyourboard.com/techzone/ovens/f1_error/f1_error.html

We repair a lot of these at www.fixyourboard.com, so you don't have to scrap out your oven.

Jun 26, 2010 | Magic Chef Kitchen Ranges

1 Answer

Magic Chef refigerator/freezer stopped running


if you said stop running id assume that there is no power?? even with good electrical input..
for that instance, better check.charred cables.. if not there maybe a problem with timer itself..

Nov 05, 2009 | Magic Chef CTB1922 Top Freezer...

1 Answer

Magic Chef oven & broiler do not work


you know i am thinking more towards a bad temp probe.

May 28, 2009 | Magic Chef 31000 Gas Kitchen Range

1 Answer

Magic chef beeping


You need to replace the touchpad. I'm just getting ready to replace mine for the second time in 14 years. A bit pricey but not a hard repair to make.
An appliance repairman told me that it's possible to peel the old pad off and carefully fish the connecting wire out to the point where it plugs together. This would save removing the burners and the stovetop I'm going to give it a try when mine arrives

Mar 01, 2008 | Magic Chef 31000 Gas Kitchen Range

1 Answer

Oven timer goes off when not being used


I have the same problem with the beeping and screen flashing F1 does anyone have a solution yet?!

Aug 22, 2006 | Magic Chef 9512 Electric Single Oven

Not finding what you are looking for?
Magic Chef 31000 Gas Kitchen Range Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magic Chef Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3484 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Are you a Magic Chef Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...