Question about Linksys Computers & Internet
Connnect to roku
There are several factors that will affect or can cause problems in connecting your Roku to your Router.
If you're getting an error message on Roku like 014, 011, make sure to indicate it in your response. Normally, if you're getting 014 message, you can follow these steps:
. A simple power cycle resolves most of the issues. To perform a power cycle, please follow the instructions below:
1. Unplug the power cables from the modem, router and the Roku player.
2. Connect the power cable to the modem (after a minute). Once all the lights on the modem are lit, plug in
the power cable to the router and then to the Roku player.
3. Go to "Settings" and redo the complete Roku setup.
If the issue continues to occur, please try the channel 1 or 3. Should it persist, you may reset the Roku
player. Here is how:
On the back or bottom of the Roku unit, you should find a recessed little hole.
- Use a pin or paperclip to press and hold the button for 30 seconds (please ensure that the power light
blinks while you are holding it down).
The Roku device will reset to default and be ready for setup again.
If the problem continues, please reflash the software via the secret screen:
1. Press the "Home" button for 5 times.
2. Press the "Forward" button for 3 times.
3. Press the "Rewind" button twice.
4. Choose Update Software and the Roku player will then restart.
You can comment your serial number or the error message that you're getting. If your getting 011, just power cycle your entire network. Also, please make sure that you're not connecting the Roku to a Guest network. The speed of your connection matters as well. It should be atleast 1.5mbps.
Posted on Feb 24, 2014
You can only use Roku properly if you set it up for streaming. For the Roku setup firstly the process begins by the connection of the HDMI cable and then plugging in the cable in the HDMI input. Then the Roku has to be connected with the AC adapter. Choose the suitable input on the Roku device. Now the Roku screen will appear. After that insert the batteries on the remote and pair the remote. In the language options select the language preferred. Set up the network connection for the device and the updates will install. Use the remote and test the programs.
To know visit the Roku setup Website.
Posted on Nov 23, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 31, 2018 | Roku Televison & Video
Dec 31, 2017 | Roku Televison & Video
Apr 12, 2015 | Roku 3
Dec 08, 2011 | Roku XD Streaming Player 1080P Wireless-N...
483 people viewed this question
Usually answered in minutes!