Question about Panasonic KV-S3065CL Path-Through Scanner

2 Answers

How do I turn off the beep it makes when it finishes scanning?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

In order to turn the beep off, you will need to download the Panasonic Scanner User Utility from the scanner download site: http://panasonic.net/pcc/support/scanner/download.html#USERUTY
Launch the User Utility and then click the button on the right that says "Paper Mode / Buzzer Setting..." Set the Buzzer Setting to OFF
That's it!

Posted on Sep 08, 2009

Ad

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 490 Answers

I donno how to control through software, but by removing the buzzer, you can cut the sound!
Scanners give a beep and they have been designed to communicate even when the operator is not around. Beeps are different for different conditions, from paper Jam to Error to Job finished. Quite an effort goes in designing the beeps, be it microwave or washing machine or Telephone handset. Lets respect the design effort and leave it as it is.
S. Mohan

Posted on Jun 05, 2009

  • Mohan Sriraman
    Mohan Sriraman Jun 07, 2009

    I downloaded KV 3065 Scanner manual from the Net, but could not locate any software function that can switch off the beep. But there must be one. Try to go user selection mode and in the panel there must be some option.

    S. Mohan

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am getting an error it is as follows: finished, spin, and wash lights blinking plus 3 beeps. What does this mean?


Try restarting it, make sure the load isnt to heavy, if that does not help, call a local repair man.

Nov 06, 2013 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

How to program itouchless doorlocks


change master code
0 + * + default/old mastercode + new 8 didgit master code + #

when successful it will make a solid single beep if unsuccessful it will beep 3 times

enroll finger print at random no user ID
1 + # + master code + #
first scan place finger on the scanner and remove when the scanner light turns off
second scan replace same finger when the scanner lights back up you will hear a single beep if enrollment is successful

if scan fails you will hear 3 beeps

Jan 15, 2012 | Itouchless Bm003l Bio-matic Fingerprint...

1 Answer

Walkie talkies model gmr325-2 ic;513C-UT914 HOW DO I GET THESE TO TRANSMIT, MY HUSBAND HAS CANCER AND WE NEED THEM IN OUR BEDROOMS AND WHEN I AM OUTSIDE, TK U, TK U


In order to get the most out of your new radio, read this reference guide completely before attempting to operate the radio.

Turning the Radio On and Adjusting the Volume

1) Press and hold the key to turn the radio ON.

2) To change the volume level press the volume/monitor up or down key to increase or decrease the volume level.

3) Press and hold the key to turn the radio OFF.

Adjusting the Sound (Key Beeps)

Your radio emits a beep each time one of the keys (except for the PTT button and call key) is pressed.
The sound of the Key Beep will increase or decrease depending on the volume level setting.

To turn OFF this beep:

Press and hold the call key while turning ON the radio.

To turn ON this beep:

Turn the radio OFF and ON again.

Choosing a Channel

Your GMR325-2 radio has 22 channels you can use to talk to others. In order to speak to someone,
each of you must be set to the same channel.

To choose a channel:

Press the channel/scan up or down key to increase or decrease the channel number displayed.

Channel Scan Feature

Your GMR325-2 radio has a channel Scan feature that allows you to easily Scan all 22 channels. When an active channel is detected, the unit will pause on that channel until the channel is clear. Then after a 2 second delay, the unit will continue scanning.

Pressing PTT button while the Scan is paused on a channel will allow you to transmit on that channel.

To turn ON channel scanning:

Press and hold either the channel/scan up or down key. The channel number on the display
will rapidly cycle through the channels.

To turn OFF channel scanning:

Press either the channel/scan up or down key.

Talking on Your Radio

To talk to others using the radio:
1) Press and hold the PTT button and speak in a clear, normal voice about 2-3 inches away from the microphone.

While you are transmitting the tx icon is displayed. To avoid cutting off the first part of your transmission, pause slightly after pressing the PTT button before you start talking.

2) When you are finished speaking, release the PTT button.You can now receive incoming calls. While receiving, the rx icon is displayed.

Transmitting a Call Alert Tone

Your GMR325-2 radio is equipped with a call tone that will be transmitted when the call key is pressed.

To transmit the call alert tone, press the call key.

The tone will automatically be transmitted for a fixed length of time.

Auto Squelch Feature

The GMR325-2 is equipped with an automatic squelch system which shuts off weak transmissions
and unwanted noise due to terrain conditions or if you have reached your range limit.

Monitor Mode Feature

Your GMR325-2 radio allows you to listen for weak signals on the current channel at the press of a key.

To turn ON monitor mode:

Press and hold the volume/monitor up or down key. The rx icon will blink.

To turn OFF monitor mode:

Press the volume/monitor up or down key. The rx icon will stop blinking.

Automatic Power Save Feature

Your GMR325-2 has a unique circuit designed to dramatically extend the life of the batteries. If there is neither transmission nor an incoming call within 2 seconds, your radio switches to the Power Save mode. The radio is still able to receive transmissions in this mode.

KEYLOCK ON/OFF

Press and hold the call key until the "L" appears. After 1 second, the LCD will return to the channel display.
To exit Keylock on mode, press and hold call again.

Note: While in keylock on mode, it will still receive transmissions.

ROGER BEEP

Roger Beep is a BEEP that is sent to notify the end of transmission.
Roger Beep can be heard through the speaker when Key Beep is on.
Roger Beep is transmitted even if key beep is turned off. However Roger Beep will not be heard from the speaker.

To turn OFF Roger Beep: Press and hold the channel/scan up Key while turning on the radio.

Jun 21, 2011 | Motorola Walkie Talkies 2-Way Radio

1 Answer

My computer will not boot up. it beeps 3 or 4 times then beeps again. at first it would do scan on bootup and not finish. then it would reboot


The beeps that you are explaing it could very easily be a RAM chip failure. Not 100% on that it really depends on the exact beep code
http://www.bioscentral.com/postcodes/dellbios.htm
Has A list of the common beep codes for most dell model computers.

Sep 07, 2010 | Dell Dimension 4600 PC Desktop

1 Answer

Inspiron 1520-before finishes loading desktop screen goes black..


if it works fine in safe mode you should try a system restore . most of the time a problem that gos away in safe mode is driver related . IE software don't think you have a hard ware issue. you can call dell if you do not have the disk . 1-866-751-6079 call this number it's dell's Spanish tech support number but this is the fastest way to reach a real person at dell . just ask them to speak English and they will.

May 12, 2010 | Dell Inspiron 1520 Motherboard

1 Answer

Inspiron 1520-before finishes loading desktop screen goes black..


As it works ok in safe mode, I suggest you check that your graphics drivers are up to date.

You should be able to download the latest from the Dell website.

Mar 20, 2010 | Dell Inspiron 1520 Motherboard

1 Answer

Zanussi washing machine is making five beeps and not workign - what does this mean? It is not in the manual


My Zanussi Fs1555w is not finishing it's cycle and beeping 7 times. If I put on spin the cycle lasts less than a minute before the end button beeps, then it will beep repetitively 7 times until turned off. Please help

Feb 05, 2010 | Zanussi FS1455W Front Load Washer

1 Answer

How do you go to silent mode?


There are two different kinds of beeps you can control, the "roger" beep and the "button" beeps. Below is an excerpt from the owners manual explaining the simple procedure.

“Roger” Beeps/Talk Confirmation Tone
When you turn this feature On, your two-way radio transmits a unique tone when
you finish transmitting. It’s like saying “Roger” or “Over” and lets others know
you have finished talking. If the person you are talking to does not hear the talk
confirmation tone, you can enable it by pressing and holding + (plus) as you turn On
your radio. Now, whenever you release the PTT, you let your friends know you have
finished talking by transmitting a “Roger” Beep tone. “Roger” Beeps will be
disabled as the Default Setting.
Note: To toggle the Talk Confirmation Tone feature, turn your radio Off and then
back On while pressing and holding + (plus) .

Button Beeps
Every time you press a button on the front of your radio, it beeps unless you turn
Button Beeps Off. To turn Button Beeps Off, turn your radio On while you press - (minus) and
hold . To turn Button Beeps back On, turn the radio Off and then back On again
while you press and hold the - (minus) . On is the Default setting.

Here is a link to the manual: http://www.giantintl.com/RadioPDFs/Outdated%20Manuals/T7100_User_Manual_E.pdf
17

Nov 28, 2008 | Motorola T7100 2-Way Radio

1 Answer

Copier beeps after scanning


Is this connected to a Vista computer? There might be a few extra things that need to be turned off permanently in the computers admin settings.

Nov 21, 2008 | Xerox Office Equipment & Supplies

Not finding what you are looking for?
Panasonic KV-S3065CL Path-Through Scanner Logo

565 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6862 Answers

Shannon Murphy

Level 1 Expert

2 Answers

Are you a Panasonic Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...