Question about RCA 32" LED HDTV LED32B30RQ - ON Corp US, Inc

Open Question

How do i connect an insignia NS-SB212 to an rca LED32B30RQD without using the RCA plugs?

I have a dvd/vcr player attached to the tv. There are no open jacks for the soundbar. Can I use a digital audio cable to go from the tv's digital audio jack to the insignia "optical in" jack?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 119 Answers

SOURCE: audio output jacks

If I remember this tv correctly, check under the audio setting in the menu, most tv's including this on have variable output for the audio o/p. meaning the the o/p vol. is adjusted as the tv speaker vol. changes. some tv's will put out a fixed audio o/p to the rca jacks, but will only do this when the speakers are shut off in the menu (not muted, but off). I have run into this problem many times & have yet to find a better solution to getting a steady sound sound out of the o/p jacks.

Posted on Nov 03, 2006

Ad

Anonymous

  • 17 Answers

SOURCE: How to hook up a DVD player

are you conecting video out/dvd to video in/tv and select av on tv.simple. reg'chook.

Posted on Mar 29, 2007

Anonymous

  • 1 Answer

SOURCE: help rca 46inch

I have the same problem using HDMI cable, I was able to get it working using composite or RCA
cables. I still cant get it working on none of the 3 hdmi inputs

Posted on Nov 07, 2008

Anonymous

  • 2 Answers

SOURCE: RCA RT2280 surround sound mode button wont select 5.1 dolby digital mode.

I had the same problem and this is what I did to fix it. Assuming that all of your equipment is powered on, (tv, blu-ray/dvd, rca receiver) you'll need to go into your dvd players audio menu and select the dolby digital audio.
Once you do this, the digital signal is sent to your receiver from the dvd. The receiver should automatically set itself to the dolby digital preset. If it doesn't, press the surround button until you reach it. I found part of this information here. And the rest was personal experience.
Also, it depends on if the disc format is in dolby 5.1. I hope this helps you.

Posted on Dec 28, 2008

Anonymous

  • 1077 Answers

SOURCE: "Unusable Signal"

Ok. PCB means Printed Circuit Board.
It looks similar to the picture down below. A part must have gone bad on your PC board. So, the RCA shop ordered a replacement PC board to fix the problem. It's an interchangeable part. All newer TV now have PC boards, which each one hold a different function.ebc3c7f.jpg

Posted on Mar 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Audio output stopped working on my sound bar. Power is on.


sounds like a bad tuner board .

If you need further help, I’m available over the phone at https://www.6ya.com/expert/richard_b59056c0c62ecb00

Sep 21, 2014 | Insignia Soundbar Home Theater Speaker...

1 Answer

I AM TRYING TO HOOK UP A SONY DVD PLAYER TO AN INSIGNIA TV/DVD COMBO. CAN IT BE DONE. IF SO DO U NEED A DIFFERENT CABLE OR EXACTLY HOW DO YOU CONNECT THE TWO....THANKS


It will depend on the TV/DVD combo and the DVD player. Most TV/DVD combos can have another device attached but you will need to get the cable. Since you posted this under the Insignia IS-DVD1001, I'm not sure which TV or DVD player you have.

In general, look at the back of the TV and the DVD player and see what ports are on both (input on TV and output on the DVD player). If you have HDMI out on the DVD player and HDMI in on the TV, get an HDMI cable and use that; generally you do not need the most expensive cables available. The next best choice is Component video and A/V audio. One cable with three RCA plugs (red, blue and green) on both ends carries the video and a second cable with two RCA plugs (white and red) carries the audio. The third choice is composite video or S-video and the audio. (Composite video is usually designated by yellow and is again an RCA plug. S-video is like a large version of a PS2 (keyboard or mouse) connector. All of these cables are available at electronics stores, stores that sell cables or electronic accessories.

If the two do not have the same ports, you need an appropriate converter (or modulator if the input port is the coax port on the TV). You can find many of these at RadioShack or online.

I hope this helps.

Cindy Wells

Aug 18, 2010 | Insignia IS-DVD1001 DVD Recorder/VCR

1 Answer

How can i hook my dvd player to my flat screen to watch a movie that we all can see


Connecting this up will be easy. What you do is get a yourself a set of the right, for your setup, cables. That uses EITHER one of the formats, of these described, below. You will need, either, a THREE way Cable, or three separate " Coaxial Cored" Cables with RCA PLUGS on them. ColoredYellow, (Video) Red, & White. (Audio) AV. OR If you have SCARTConnection Sockets, it's a big Black Socket at rear of unit(s), you get aSCART Cable.& It's all inside. Now some units, use a standard calledComponent Video, that uses, a Green, Red, & Blue Plugs. Now, with the Component setup, you will also ,need, Two more Cables, for the AV Audio. these are, Red & White.(So with Component Video there are 5 Cables/Plugs in all). In any event ALL Cables go Color to Color, at each end, plugging into the corresponding Colored RCA Jacks, on either machine, or VCR or TV. Now if you have SCART, then it simply plugs in only one way. It is that simple. So connect up with the leads your set uses, and select the correct "Input" from TV/Remote, it is NOT on a "Channel" it will be on AV, AUX, and Press "Play" on VCR/DVD whatever.... should be all go.

Mar 02, 2010 | Insignia NS-PDVD10 Portable DVD Player

1 Answer

What channel do you watch a vcr/dvd on.


It depends on the way you have the combo set up, your instruction manual shows you different ways of doing this, but to answer the question it would be channel 3 or 4 if you are using the RF out ot OUT to TV connector in the back of your combo. You can also view tape and disc playback if you set the TV for VID1 or VID2 if you are using the rca dubbing cables(yellow-red-white).I hope this helps!

Jan 05, 2010 | Insignia NS-L37Q-10A 37 in. HD-Ready LCD...

1 Answer

There has got to be a way


I have this model..was trying to hook it up to a directv hughes receiver. After a day of trying and many curse words I found that using this hookup works . Hook up your satellite connection to you tv as usual...Now plug rca cables(red, yellow white) into the corresponding holes on the BACK of the Directv receiver ..now plug the rca cables into the FRONT of the Magnavox player...you will only use find holes for the white and yellow(that's ok) Now hook up up the dvd player to the tv using the rca connection back of dvd/vcr player..or if your tv only has a coax connection you will need a rf modulator available at walmart etc. You will run the dvd/vcr on L2. The key is the connections to the FRONT of the dvd/vcr player..I hope this helps..:)

Aug 03, 2009 | Philips Magnavox DVD/VCR Dual Player

3 Answers

Magnavox dv220mw9 does not have a ant. in,or ant. out. How do I hook up to my direct tv satellite rcvr. My original hook up is from a DTV d10-300 RCVR to a Sylvania vcr/dvd SR2900,which has a antenna in...


have this model..was trying to hook it up to a directv hughes receiver.After a day of trying and many curse words I found that using thishookup works . Hook up your satellite connection to you tv asusual...Now plug rca cables(red,yellow white) into the corresponding holes on the BACK of the Directvreceiver ..now plug the rca cables into the FRONT of the Magnavoxplayer...you will only use find holes for the white and yellow(that'sok) Now hook up up the dvd player2.gifto the tv using the rca connection back of dvd/vcr player..or if yourtv only has a coax connection you will need a rf modulator available atwalmart etc. You will run the dvd/vcr on L2. The key is the connectionsto the FRONT of the dvd/vcr player..I hope this helps..:)

Jun 04, 2009 | Philips Magnavox DVD/VCR Dual Player

1 Answer

No video audio connecters


If you have a VCR with RCA inputs and coax (cable) output to TV, try plugging the DVD players RCA outputs (L/R audio, composite video) to VCR RCA inputs. Then select the DVD input on the VCR and it shoud play just as a the VCR does. If you don't have a VCR, an RF modulator might be needed, but a VCR would probably be cheaper.

Jan 24, 2009 | GE 25GT240 25" TV

2 Answers

Dvd without coaxial, old tv without RCA, passthrough VCR died


http://www.ellies.co.za/v2/index.php?id=492

@ tihis link above you can see it. It takes the av SIgnal Your Sound and picture and convert it RF making it possible for your tv to tune it, its just like tunning into a station. I do sell these for R199 South African Rand excluding postage

Thank you for using FIX YA

Jan 04, 2009 | Televison & Video

1 Answer

Converter box


the digital box has to hooked up the rca plugs on the bac of the vcr if you want to use the vcr (you will only be able to pick up channels throught input and the box will have be set on the channel you want to record. You need a switch to hook the vcr and dvd player both up. the atenna cord can be attached to the back of the convertor box then attached to the tv.

Jun 15, 2008 | Insignia Digital-to-Analog Converter for...

2 Answers

Samsung CXD2512 TV/VCR Combo...Cannot hook up DVD player


We also don't have a remote. We hooked a DVD/VCR combo to the Samsung combo by attaching the cable from the cable line to the DVD player and an additional cable from DVD to TV and it used to work but after we lost the control, the DVD can only be listened to but not seen. The VHS from the DVD player works perfectly though.

When we had the remote (before connecting the other combo) we used line-in to see a DVD or VHS using the yellow red and white cables from the Samsung to the other player.

Sep 05, 2007 | Samsung CXD2512 25 in. Combo

Not finding what you are looking for?
RCA 32" LED HDTV LED32B30RQ - ON Corp US, Inc Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...