Question about Tilia FoodSaver V2240

1 Answer

Sealing button blinking when i push any of the other buttons and no sealing and vacuum working

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Hi, it might be a problem with the sealing pump or something electric. If you are within the US or in Canada please contact us with your serial#: 1-888-956-6866 X: 234 OR X: 235. Eurodib

Posted on Feb 11, 2014

  • Isabelle Tanguay
    Isabelle Tanguay Feb 11, 2014

    Please disregard the solution, it was for another brand... sorry!

×

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

drofdarpdr

  • 5 Answers

SOURCE: The V2240 does not seal

It's possible that liquid is getting into the sealer or the seal is dirty. Here's a link for a pdf that explains possible problems and solutions.

http://www.foodsaver.com/Manuals/MANUALS/T000-32030_44_65900646.PDF

Posted on Dec 16, 2010

hunter19_46m

Curtis Sewell

  • 7482 Answers

SOURCE: I have a Foodsaver 2840

Hi donnaj615...
Start the vacuum and then immediately click on the seal button...
I have a 750 that does the same thing...
Please take time to rate me

Posted on Aug 13, 2011

jeff

  • 1 Answer

SOURCE: 2240 unit vacuums but won't go into seal mode. if the seal button is manually pushed, it will then seal but the vacuum is lost

I am having the same problem, it is like the heating element for the sealer is broken.My unit actually will NOT seal if I push the manual seal, but the vacuum works.

Posted on Mar 03, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Foodsaver v3420


It's broken, it should heat up and seal.
Contact the manufacturer here: Sites food saver Site

May 13, 2014 | Kitchen Appliances - Others

1 Answer

The red "!" icon is on when I turn on my vacuum


Button on CARPET, lower the handle for use, turn on power and the brush turns. Handle up like for storage, brush does not turn. Bare floor button pushed, does not turn.

Dec 25, 2013 | Electrolux EL8807A Precision BrushRoll...

1 Answer

After the sound stops and the light goes off, I stop pressing the button, but then the sound starts up again. The machine seals and vacuums properly, but I worried that it makes noise again. thank s


I guess your talking about a foodsaver. The noise is from the vacuum pump and is usually a little loud. You shouldn't need to keep your button pushed. Is it working when you just hit the vac/seal button and release? If your holding it the whole time, it may be starting another cycle.

Dec 12, 2013 | Heating & Cooling

1 Answer

My 1997 GMC Sierra lights for 4hi and 4lo blink when i push the 4hi button and then goes back into 2hi. but when i push 4lo it locks in and works fine. I tried changing the 4wd motor on the transfer c


THE TRANSFER CASE MOTOR IS ONLY FOR 4WD LOW. That would have never been the problem as soon as you confirmed it shifted into 4wd Low. 2wd and 4 Hi work off of vacuum. You may have one or two issues. A vacuum leak up by the front axle that engages the 4wd HI or the sensors on the transfer case.

Nov 22, 2013 | 1997 GMC Sierra

1 Answer

2240 unit vacuums but won't go into seal mode. if the seal button is manually pushed, it will then seal but the vacuum is lost


I am having the same problem, it is like the heating element for the sealer is broken.My unit actually will NOT seal if I push the manual seal, but the vacuum works.

Feb 24, 2013 | Tilia FoodSaver V2240

3 Answers

Foodsaver Professional II locked up. 3 green lights blink on and off. Is the problem fixable?


I completely diassembeled my unit and could find nothing wrong. I reassembled it and had the same problem.

In my opnion the controlled board has failed; time to guy a new Foodsaver.

The small black rubber covered hole on the left side of the vacuum channel is not the reset button, it is the "lid closed" button.

The seal is not the issue as the lights start blinking right after you turn the unit on.

Jun 23, 2012 | Kitchen Appliances - Others

1 Answer

I have a Foodsaver 2840 that will vacuum and seal, but not seal alone. The manual button does not work (though it worked earlier today). I have tried everything. Any hints?


Hi donnaj615...
Start the vacuum and then immediately click on the seal button...
I have a 750 that does the same thing...
Please take time to rate me

Aug 13, 2011 | Tilia FoodSaver V2240

1 Answer

The clean light on my kitchen aid dish washer kept blinking and would not stop. after reseting it by pushing the buttons 2-3 times it cycles though and stops. then nothing works when i push the...


The electronic control looks for a temp. rise of 2-4 degrees. If no temp.rise control assumes a heater fault and blinks clean light 7 times. Bad heater. Water fill when completed can be no less than 1/2 inch below heater. If so, water valve probably. Circulation motor not working properly. Neutral door switch. Tech sheet is behind bottom cover. Check underneath of unit for leaking or white hard water deposits. Common for seals to leak. If unit is unusually noisy, motor problem. Common after 4-5 years. Will check back to see if you other questions. Good luck.

Mar 28, 2011 | Dishwashers

1 Answer

Samsung Remote BN59-00539A not working


Remote Control not working with dvd plyer

Mar 25, 2009 | Samsung BN59-00599A Remote Control

2 Answers

Lock Light Blinking


silly question but did you try holding the control lock button(perhaps its the heated dry button) in for 3 secs???? sonds as if the CONTROL LOCK has benn activated( child lockout)

Jan 14, 2009 | Kenmore 24 in. 15932 Built-in Dishwasher

Not finding what you are looking for?
Tilia FoodSaver V2240 Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tilia Kitchen Appliances - Others Experts

Sheldon Dedek

Level 3 Expert

909 Answers

Vitally Alcher

Level 3 Expert

1645 Answers

Bonard Allen

Level 2 Expert

101 Answers

Are you a Tilia Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...