Question about Krups XP4030 Espresso Machine

3 Answers

Error Code 9 on a Krups XP7240 Expresso machine

I have a Krups XP7240 Expresso machine, I have just changed the filter, run the self diagnostics and an error code 9 has appeared, suggesting I need to contact the service agent. Please help

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 5 Answers

After I changed piston sealing I get the same error 09. It was caused by missing connection to the thermoblock temperature sensor. In my case both connectors for thermocouple were cracked. They are located directly on the body of thermoblock, below two fuses, covered by rubber housing. After I solder them again on the position error 09 disappeared. Unfortunately it is necessary to open at least front panel of the machine. Moreover I tink that there is also important to save polarity of those two cables.

Posted on Aug 07, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Krups

Posted on Apr 02, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Your temperature sensor switch is off. God Bless

Joseph

Posted on Aug 31, 2012

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error 9 on a Krups EA8000 Expresso . The contacts on the thermobloc are OK


Error 9 is only related to the NTC on the front of the thermobloc. That's the wires, terminals or the resistor on the NTC that changes value with heat.

Sep 19, 2018 | Krups Coffee Makers & Espresso Machines

1 Answer

Error Code 9 on a Krups EA8000 Expresso machine


The heat sensor on the boiler is not detecting any temperature change. It could be a wire or terminal off. The sensor is right at the front of the boiler. If the sensor is faulty it means a new boiler because it's stuck on in the factory.

Sep 19, 2018 | Krups Coffee Makers & Espresso Machines

1 Answer

Krups EA8080 Error 09


You need to contact the service agent.

Jul 31, 2018 | Krups Coffee Makers & Espresso Machines

1 Answer

Error code 05 appeared on my coffee machine xp7240, what happened?


Error 05 I would normally associate with a distributor problem,
New distributor
New barista seal
New tamping piston seals
New tank seal

It is not a job for the faint hearted.

Aug 13, 2012 | Krups Small Appliances Espresso Machine

1 Answer

I had some water problems with mij krups and try to solve it. Now it gives an error 0D. What does this mean?


I have a Krups XP7240 that came with the same error code (0d). I believe that the XP7240 and the XP7245 is pretty much identical inside. The sollution for me was that the connector to the front was loose. After pressing down on the connector, the machine worked perfectly again.

RuneBune

Feb 11, 2011 | Krups XP7245

1 Answer

I have a problem with my Krups XP7240, it is


You can just removed the water tank filter (the cylinder inside the water tank) and washed it up. (Actually the filter should probably be replaced). Fix it back in the water tank and tide it safety upon the exit ring.

Don't forget to unplug the machine BEFORE doing this.
Next, restart the machine and let it perform the automatic self testing.

May 10, 2010 | Krups Small Appliances Espresso Machine

1 Answer

Krups xp7230, no water running through nozzles


Yes, you're machine is identical to the xp7240. Look up the post on leaking xp7240 and follow the instructions on how to open the machine and fix the valve.

Jan 06, 2009 | Krups XP7230 Compact Super Automatic...

6 Answers

Machine Fault Error No 06 at start up Model is Krups XP7240 Expresso - not listed in product list


The error 06 (comes after start up) and machine in auto test - happens because more than one problem. One of the compulory services, rinsing, change water filter, cleaning OR / AND descaling is out of date. Start off with one at a time and do ALL.
Reconfirm it by going into "Product Information" and confirm that the cycles since previous cleaning, descaling and water filter replacement is ZERO.
Your machine will NOT have start up problems any longer
Regards

Jul 10, 2008 | Krups XP4030 Espresso Machine

1 Answer

I have a 12 month old KRUPS XP7240 coffee maker. It has just ceased to grind the beans. I suspect that the grinder or hopper to the grinder is blocked? Any suggestions how it might be...


You need to open the machine which is easy see my other post on leaking krups xp7240. The grinder can be taken out by removing two torix screws. Probably the electical brushes are gone. Take the grinder engine to a repair shop where they replace them.

May 19, 2008 | Krups XP2070 10 cup Coffee Maker/15 bar...

Not finding what you are looking for?
Krups XP4030 Espresso Machine Logo

8,143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Krups Coffee Makers & Espresso Machines Experts

Pierre Laplante

Level 3 Expert

2042 Answers

Ray Murphy

Level 2 Expert

68 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Krups Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...