Question about DISH Network ES161256 21.0 IR / UHF Pro Remote Kit for Receivers ES16

1 Answer

Harmon kardon codes for dish tv remote - DISH Network ES161256 21.0 IR / UHF Pro Remote Kit for Receivers ES16

Posted by on

Ad

1 Answer

  • Official Brand Answer
  • 184 Answers

I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at Kimberly.escobar@dish.com!

You can lookup codes if needed here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Kimberly Escobar
Social Media Representative
DISH L.L.C

Posted on May 22, 2014

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Jim Franks

  • 374 Answers

SOURCE: need sharp tv codes

The codes for a Sharp are 526, 585, 591, 605, 606, 607, 608, 628, 629. Thanks for using Fix Ya.

Posted on Aug 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Avr 520 will not turn on with my remote tried all codes the unit will turn off and works with remote but i have to turn on manually


Could be that the "on" button is not making proper contact on the remote and the other buttons do work. To confirm place remote on top of an am radio tuned to about 600 on the dial, turn up the volume and start nailing the buttons on by one.

You will hear a beep for each button you press. If nada for a button then it is bogus. U can try cleaning the contact of the remote for that button or maybe even use a very small piece of tin foil on the remote itself for that button. If nothing helps the only solution might be expensive if you decide to replace the remote.

Aug 29, 2015 | Harmon Kardon Harman/kardon Av Surround...

1 Answer

Harman kardon avr 1500


Try using the RCA outputs once and see if that works..One other thing don't use the phono input on the receiver as it could damage the amplifier

Feb 16, 2018 | Audio Players & Recorders

1 Answer

My Cox HD/DVR controller will turn off but will not turn on my new HKAVR1700 using the AUX button on the Cox supplied URC-8820-Cisco remote.


This is a documented problem with the Harmon/Kardon AVR-1700 and the Cox remote. Here's how I solved it. On the HK1700, go to System Settings and turn on HDMI Link. This will allow your TV (if it has the feature) to put the HK in standby mode when you power down the TV. Go to your setting on your TV and turn on HDMI link, or equivalent. I have a Sony TV and the setting is called "Control For HDMI." Then, use code 0110 for your Cox remote. This code will only turn on the HK, not turn it off. BUT, the HDMI Link should put the HK into standby.

Jan 06, 2013 | Harman Kardon Harman/Kardon AVR 1700

1 Answer

Please Help --- We have a Harmon Kardon AVR 700. I just got a new receiver from Dish Network. We had to pull out the Harmon Kardon. Something seems to be unplugged from behind. Now I don't get a...


Hi my nameis Mike Houston of DISH Network and I see where you're not getting a picture buthave sound. There are some things you can check, first you will want to makesure all connections are tight and then make sure you're on the right input toreceive the DISH channels. I will leave a link to help with these steps, http://www.dishnetwork.com/SupportSection/setup-receiver.If you have any questions or concerns please e-mail me, michael.houston@dishnetwork.com.

May 10, 2011 | Harman Kardon AVR 7000

2 Answers

Hi how can I turn off my Harman Kardon receiver with the 3.1 Dishnetwork remote?


Guest

I have provided instructions on how to program your DISH remote to a different component. I hope this helps.

Address To Other Equipment Using Code
  • Remotes: Multiple Mode Buttons (TV,VCR, AUX)
    1. Press and hold the desired Mode button until all mode button backlights come on, then release.
    2. Use the number buttons to enter the device code corresponding to the equipment. AUX Mode: Before entering the device code:
      • Press 0 for a TV
      • Press 1 for a VCR/DVD
      • Press 2 for any other device.
    3. Press the pound (#) button Note: The light will blink off after each digit is entered and then return to a steady light.
    4. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
Here are the codes to try: 640, 672, 751

Ray Calo
DISH Network

Jun 28, 2010 | DISH Network IR Remote Control

1 Answer

How can i make the sky remote control th avr 130 (harmon kardon)


Does the sky remote have a code for the HK receiver? If it does, use that code to program it. Most other remotes won't work completely because this receiver uses a seperate button to turn it off...

Mar 14, 2010 | Harman Kardon AVR 130 Receiver

1 Answer

Need starchoice codes for Karman Kardon AVR 220


http://www.starchoice.ca/english/customercare/techcentral/remote_controls.asp

Look here for the codes to whatever remote you have. The chances are there arent any though. Harmon Kardon codes are a very unique signal that most remotes cant duplicate. More than likely you are going to have to use the original Harmon Kardon remote.

Oct 24, 2009 | Televison & Video

1 Answer

MX-450 universal remote code for AVR-354


Harm an / Kardon 0 0 8 1 ,0 0 3 8

Sep 14, 2009 | Televison & Video

3 Answers

Harmon kardon 745 displays "unlock" no sound for tv or movies


I also had this UNLOCK message on my Harman Cardon AVR 130.
The reason for this error was - in a hurry I've plugged the optical input into optical OUT! Double check that your connections in the back are correct and hopefully it fixes your problem.

Cheers,
Sergey

Jan 11, 2009 | Harman Kardon AVR 130 Receiver

Not finding what you are looking for?
DISH Network ES161256 21.0 IR / UHF Pro Remote Kit for Receivers ES16 Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76177 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...