Question about Xerox 6400/XF Color Laser Mfp Workcentre 6400

1 Answer

Xerox 6400 hangs up at boot screen - Xerox 6400/XF Color Laser Mfp Workcentre 6400

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 22 Answers

I hate to say this, but chances are either the software is corrupt or one of the two drives has failed. Your best bet is to call for a xerox authorized technician.

If by chance you are one, download the firmware from xerox and perform the altboot/forced upgrade solution in the manual. Even if it fails it will generally tell you which drive is bad. You can tell by when it fails on reload, copy control or network control. You'll need a new 160gb sata drive that is comparable with the machine, or order a firmware matching set of drives from xerox.

Posted on May 04, 2014


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Windows xp startup problem

You may need to "wipe" or reformat your entire C drive to be able to install Windows program again. I would suggest installing WIN7 program as WIN XP is at its end of life cycle for that operating system and Microsoft may not support it any longer.

If possible try installing WIN7 once again, and if requested to reformat or do an entire install, choose YES.

WIN 7 should then reformat your C drive, erase everything that is on it and then install as WIN7 program.

Be sure you have your program license key to install WIN7.

Mar 31, 2014 | Dell Inspiron 6400 Notebook

4 Answers

Dell 6400 hangs and then crashes

Try replacing or upgrading your RAM it sounds like your PC is overworked and the bsod is probably a result of data loss due to low ram

Aug 18, 2008 | Computers & Internet

1 Answer

I have an inspiron 6400, and when i start the laptop i get the dell screen and the bar running across then just a black screen, i have tries using all of the options of F8 and F12 but none of them do...

Your computer is not booting up and it can be either software or hardware problem. You can check out the software part by trying to boot it with the original OS CD/DVD. If it does boot then you will need to reinstall windows by using the repair option by following the on-screen instructions.

If it fails to boot up then its a problem of the hardware. It could be as simple as cleaning the ram modules or more complicated, hence I would advice you seek help from their authorized service center.

Nov 15, 2010 | Dell Inspiron 6400 Notebook

2 Answers

Xerox phaser 7500DN does not proceed after warming up screen. Hangs on Warming Up Screen.

Open and close the paper drawers!!! Super stupid solution, but trust me... it works!

Aug 17, 2010 | Xerox Phaser 7750DN Laser Printer

1 Answer

Fiery EX12 hangs on booting no further process is...

You will need to reload the software in the Fiery.

May 20, 2010 | Xerox DocuColor 12 Printer

2 Answers

My fiery EXP 12 not booting what can I do to fix this problem

You should be able to plug a monitor into the fiery. Do that and turn off the machine and fiery. Then power up and watch the monitor and see where it hangs. If it doesn't boot up you may have to get a Xerox technician in to restore/ugrade the system software for the fiery.

Nov 22, 2009 | Xerox DocuColor 12 Color Copier

1 Answer

DELL inspiron 6400 not switched on

This is a no boot issue. Youre saying that you can perfectly run the PSA diagnostics but doesnt load Windows rather it stays on black screen, meaning the boot loader of Windows failed to load. You need to reinstall windows on your computer

Jun 02, 2009 | Dell Inspiron 6400 Notebook

1 Answer

I have a desktop dimension 6400 and it goes to black screen i pressed f12 and went thru every thing and pressed enter it goes back to black screen

Sounds like you are having a boot issue with the hard drive.

Try booting to your XP CD from the F12 menu and running CHKDSK /F from recovery console

Jan 14, 2009 | Dell Inspiron 6400 Notebook

1 Answer


if u getting this message in ur fiery just reinstal software... this only solution... and if u get this error in ur printer pls check error code in bottom of the display..

Aug 21, 2008 | Xerox DocuColor 12 Printer

Not finding what you are looking for?
Xerox 6400/XF Color Laser Mfp Workcentre 6400 Logo

514 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts


Level 3 Expert

4345 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers


Level 3 Expert

1363 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides