Question about KitchenAid KFP600 Ultra Power 11 Cups Food Processor

2 Answers

I have a kitchenaid food processor and the bowl is tightly set on the right side of center. I can't straighten it out and when I try to move it, it sounds like I'm cracking plastic. It won't run! Any suggestions?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Items required:
-dishwasher
-detergent
-lemonade or other citric liquid
-poochy
-skillz

Step 1:
gently position poochy around tube in center of bowl. Fill halfway with lemonade or other citric liquid.

Step 2: Put lid of processor on and put entire unit in dishwasher. Turn on power scrub cycle.
The dishwashing cycle will help the citric acid to activate the poochy.

Step 3: Use skillz to wriggle the bowl off the processor. Empty out poochy remains.
Congratulations! YOU'VE GOT SKILLZ!

Posted on Aug 22, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try putting the lid on the processor before you give it the final turn. I had the same problem and all I had to do was put the lid on first.

Posted on Sep 03, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Kitchenaid food processor KFP1642MS This model requires the bowl, lid and plunger to be installed before it works. With all items installed this processor has been intermittent and getting worse.


The solution is 90% going to be replace the lid, or replace the bowl or if you are very unlucky replace both. A proper KitchenAid service agent should have both parts on the shelf and will be able to try a new one of either to see where the fault lies. I think over the years I've replaced more lids than I have bowls.

Feb 25, 2018 | KitchenAid Food Processors

Tip

The cusinart pro classic food processor is not working ?


Try this procedure:-- It usually goes something like this, with minor variations depending on model number:1.Remove the work bowl completely from the base
2.Plug the food processor in and turn it on
3.Use a pen to depress the dark grey/black button on the base – if it spins, proceed
4.Put the work bowl on the base with the handle facing the front of the food processor – slide the work bowl until it locks - the white tabs show in the openings on the bottom of either side of the work bowl
5.Place the lid on the work bowl with the tab slightly left of the center of the work bowl handle – slide the lid counterclockwise until it won’t slide any more
6.Place the pusher sleeve in the feeder tube of the lid with the lock facing the front of the food processor (may vary depending on model)
7.Slide the lock to the right into the locked position
The food processor should now work.
This will help.Good luck.

on Mar 08, 2010 | Food Processors

2 Answers

Pin dislodged in handle


KitchenAid Food Processor Parts
find your processor here and find parts
ereplacementparts has all kinds of parts available!!!


25627312-ntreoszzy1joii1rkf5ofjo2-3-0.png

Apr 04, 2015 | KitchenAid 12-Cup Food Processor Chef&39;s...

1 Answer

Very frustrated with kitchenaid food processor - using any slicing disk only the first batch of food works, when you put in the 2nd batch nothing happens


Mine is older and works fine once I realized bowl has to be snapped into place before the cover and then the cover has to be locked in. This activates a small button at the base of the bowl that activates a safety switch.

Jan 03, 2015 | KitchenAid Food Processors

1 Answer

My kitchenaid processor is not working


The Kitchenaid food processors have a few safety features implimented. If the unit is not assembled properly, this may prevent the unit from turning on. I am thinking this is an issue of assembly because the light is on, so the unit is definitely getting power.

Proper assembly is below:

If it isn't all ready, please disassemble the entire unit. This means removing the blade and/or disc, blade, removing work bowl, work bowl lid, and blade.

Start by placing the work bowl onto the motor base. The work bowl handle should be facing at 9 o'clock, which is out to your left. Rotate the handle downward until it locks in at the 6 o'clock position, which will lock over the center of the button panel.

Repeat the process with the work bowl lid. The blade does not need to be present for the motor to engage, if this is an assembly issue.

Jul 29, 2009 | KitchenAid KFP715 7 Cups Food Processor

1 Answer

KitchenAid Food Processor 770 won't run


I am assuming the unit is getting power. The "power" LED should be lit up on the front of the unit.

The Kitchenaid food processors have a few safety features implimented. If the unit is not assembled properly, this may prevent the unit from turning on. Proper assembly is below:

If it isn't all ready, please disassemble the entire unit. This means removing the blade and/or disc, blade, removing work bowl, work bowl lid, and blade.

Start by placing the work bowl onto the motor base. The work bowl handle should be facing at 9 o'clock, which is out to your left. Rotate the handle downward until it locks in at the 6 o'clock position, which will lock over the center of the button panel.

Repeat the process with the work bowl lid. The blade does not need to be present for the motor to engage, if this is an assembly issue.

If this has not resolve the issue, please ensure the outlet is receiving power.

If the unit is still not functioning, take a close look at the bottom of the work bowl where it meets to the motor base. The work bowl, when locked in, depressed a gray plastic peg. This is the safety mechanism. You may trying depressing this peg on your own with a pencil. If this activates the motor, this may indicate your work bowl is no longer seating correctly.

Also check the work bowl handle to make sure nothing is cracked. There is a plastic assembly in the handle that acts as a second safety feature.

If either of these things seems to be the culprit, I would suggest seeking a new work bowl or work bowl lid to correct the issue.

Jun 18, 2009 | KitchenAid KFP670 Ultra Power Food...

1 Answer

I have the unit plugged in and the ingredients in the bowl, but it will not pulse...what am i doing wrong?


I am assuming that the unit is not getting any power whatsoever and this is not isolated solely to the pulse function not working.

The Kitchenaid food processors have a few safety features implimented. If the unit is not assembled properly, this may prevent the unit from turning on. Proper assembly is below:

If it isn't all ready, please disassemble the entire unit. This means removing the blade and/or disc, blade, removing work bowl, work bowl lid, and blade.

Start by placing the work bowl onto the motor base. The work bowl handle should be facing at 9 o'clock, which is out to your left. Rotate the handle downward until it locks in at the 6 o'clock position, which will lock over the center of the button panel.

Repeat the process with the work bowl lid. The blade does not need to be present for the motor to engage, if this is an assembly issue.

May 10, 2009 | KitchenAid KFP740 Food Processor

1 Answer

On the KitchenAid 3 cup Chef's Chopper, How do you lock the blade so I can turn on the chopper?


The Kitchenaid food choppers have a few safety features implimented. If the unit is not assembled properly, this may prevent the unit from turning on. Proper assembly is below:

If it isn't all ready, please disassemble the entire unit. This means removing work bowl, work bowl lid, and blade.

Start by placing the work bowl onto the motor base. The work bowl handle should be facing at 9 o'clock, which is out to your left. Rotate the handle downward until it locks in at the 6 o'clock position, which will lock over the center of the button panel.

Repeat the process with the work bowl lid. The blade does not need to be present for the motor to engage, if this is an assembly issue.

Dec 29, 2008 | KitchenAid KFC3100 Chef's Chopper Food...

1 Answer

The plastic ? bowl of the processor is stuck


With the food processor I have it will not allow you to remove the bowl unless the top is off.Try take the top off or putting it on.Then remove it from the processor.

Sep 22, 2008 | KitchenAid KFP670 Ultra Power Food...

Not finding what you are looking for?
KitchenAid KFP600 Ultra Power 11 Cups Food Processor Logo

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Processors Experts

ismash55

Level 2 Expert

138 Answers

john h

Level 3 Expert

22486 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you a KitchenAid Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...