Question about OKI B4250 Led Printer

2 Answers

There is a red light flashing

The last light on the farthest right of the printer is flashing, and it will not prit anything at all?

Posted by on

  • 1 more comment 
  • Anonymous Feb 20, 2008

    the right light is flasing nothing printing

  • Anonymous May 09, 2008


  • Anonymous Oct 01, 2008




2 Answers

Use the system monitor to check if you require to replace on of the color cartridges....

Posted on Oct 30, 2007


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

From the OKI site, I found this information. My problem is a Flash 2 Blink, which is a problem with the cover or minor error, whatever that means. I can't figure out how to fix it. Any suggestions greatly appreciated!

Flash type Ready LED (Green) Manual feed LED (Amber) Error LED (Amber) Meaning Flash 1 -- slow blink X There is a red light flashing - ecblank.gif ecblank.gif The printer is processing data when printing has bThere is a red light flashing - ecblank.gifed. ecblank.gif X ThThere is a red light flashing - ecblank.gifm required changing or toner is low. Flash 2 -- blink X ecblank.gif The printThere is a red light flashing - ecblank.gifving and processing data during printing or the printer is resetting itself. There is a red light flashing - ecblank.gif/uploads/images/ecblank.gif" alThere is a red light flashing - ecblank.gifgif" class="h_mi" /> ecblank.gif X eThere is a red light flashing - ecblank.gif class= The printer is requesting manual paper feed. ecblank.gif ecblank.gif ecblank.gif X There is a printing error, problem with paper or a cover open. ecblank.gif X X X There is a minor error with the printer. Flash 3 -- rapid blink X X X There is a major error with the printer.

Posted on Apr 22, 2008


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Canon IPF 5100 printer black ink is really fuzzy, I have to prit dark grey as I can't read the black. I have cleaned the heads and done nozzle checks, what else could it be?

If prints are coming out fuzzy this is likely to be an alignment issue. I would recommend doing some alignment tests from your printer/printer software.

Feb 05, 2013 | Office Equipment & Supplies

1 Answer

Need to delette all the jobs in the prit que

Hi George,

Click the first job in the list, press an hold the Shift key on the keyboard, click the last job in the queue. That will select all the jobs. Now Right Click on the jobs, and choose Cancel

Jun 12, 2011 | Brother Multi-Function Center MFC-240C...

3 Answers

Canon lbp 2900 300dpi drivers

I have canon lbp 2900 printer

in this printer i want to prit picture in 300dpi resoulition

how to print, that way i want printer 300dpidrivers

Jul 08, 2010 | Canon LASER SHOT LBP-2900 Printer

2 Answers

I believe it is due to the ink overflow pads being full and now the paper light and ink light are flashing. I have a continuous flow ink system hooked up and it is stuck in the farthest right position and...


I believe that is about a Epson ink printer, if it is, please download the "SSC Service Utility for Epson Printers" if the printer is Epson and reset the ink waste pad's. Please write the model of the printer if is not a Epson printer if the printer is Epson this should work. The software can be found on the internet for free quickly.


Jan 12, 2010 | Office Equipment & Supplies

1 Answer

Not printing words on paper

There is always a protective film on the prit nozzles. Remove it. Also from the Printer Manager clean the print head.

Nov 08, 2009 | Canon S400 InkJet Printer

1 Answer

The network and connectivity button is not working

if the machine has been set up prior to this fault and you could print to it then the connection is faulty or the password or ip address has changed.. go to the printer panel on your desktop and right click on the printer then go to ports and check the connection mode if you have ausb connection on the printer this should show up if it is set to anything else the fault lies in the port settings.. you can also print a test page from here as well on the general settings page there is a tab for test page do this and see the result.. if no page the connection to the printer is wrong or the cable faulty. if you have a network cable look at the printer input panel .. where the cable goes in there should be two small lights on aone green and a yellow below probably of no light at the connection point on the panel you have no connection.. as a last resort uninstall the copier fron=m the server/computer and reinstall use the same ip address for the copier and you should be ok.. you might need the gateway address too if you have a hub set up.Good luck A

Aug 13, 2009 | Xerox WorkCentre Pro 90 Copier

1 Answer

My printer has goe offline and i cannot prit anything from my computer please help

hi It is a request that please tell ur operating system as well to us so tht we are able to help u in a better way....
if your printer goes offline, then click on start> control panel> (in case you have XP)printers & faxes,(vista) printers> there u will find some printer icons> identify your printer & if it is off line then right clicki on it and select "use printer on line"....if it doesn't come online then go to start>
run> type in "services.msc"> a list will open> find "print spooler"> restart it by right
clicking on it. then go back to the printerv icon & check if it shows 0,ready. if it does
then try print. it will work....please let me know

Aug 07, 2009 | HP Officejet 4355 All-In-One InkJet...

1 Answer


Unplug the printer from the power strip or wallk outlet for a few minutes.
Disconnect the printer from the computer see it it powers up normally, if so connect it to the computer.
If the lights are still lit, and the printer is brand new, and none of the suggestions helped, call the manufacturer as it is in warranty.
Good Luck

Feb 16, 2009 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Red light flashing

You need a new toner bottle.

Oct 27, 2007 | OKI B4250 Led Printer

Not finding what you are looking for?
OKI B4250 Led Printer Logo

1,488 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

387 Answers


Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides