Question about Sharp EL-1197PIII Calculator

Open Question

Wont key in any number just stays 0 - Sharp EL-1197PIII Calculator

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program my rca universal remote model number rcr350?


These are the general proceeding for RCA remote controls set-up:


1. Manually turn on the device you
want to control.
2. Find your device's brand in the
Brand Code list section of the
accompanying code list. Circle
the number for your brand and
keep the list handy.
3. Press and hold the device key you want to program. The
POWER key illuminates.
While you're holding down the device key, use your other
hand to press and hold the remote's POWER key at the
same time. The POWER key turns off.
4. Wait until the POWER key comes on
and stays on. Then release both keys
5. Look at the numbers you circled for
your device's brand code number.
Press those numbers on the remote
keypad.
Note: For single-digit brand codes,
press the 0 key first (for example, 0-5
for 5).
6. Point the remote directly at the
front panel of the device you want
to control. Press POWER on the
remote and wait 2 seconds. The
remote is testing a single code for
your device's brand.

Aug 01, 2012 | RCA RCR350 Remote Control

1 Answer

I wont to nokia 1200 phone IMEi number addite


Hello Press the following keys one by one: * # 0 6 # As you press on the last #, a number will appear with the title, IMEI number
Hope this helps, if so do rate the solution

Jan 12, 2011 | Nokia 1100

2 Answers

Cranks normal wont start


bad spyder it sonds like

Apr 01, 2010 | 2000 Chevrolet Blazer

1 Answer

Error code SC548 wont let me do anything.


please follow the instruction and you will reset the copier:
press the follow keys in order:
1. press the yellow key[c] (clear)
2. press 1-0-7 on the number pad
3.press and hold it pressed the red key [c] (stop)
4.When on the screen will appear other menu different from the usual turn off the machine from the main switch (the red switch) and then turn it on after 5 seconds.
Please answer do this is helpful for we to know if is needed some more information.(if this was not helpful you will need to write the machine model number)

Jan 22, 2010 | Office Equipment & Supplies

1 Answer

2008 T&C (GD batteries) vehicle wont acknowledge key, or lights


The keys have security codes in them. If the key does not match the one the vehicle is looking for it won't start. You need to take the key and vehicle to a dealer to be reprogramed. Or if you just bought a key and have the old one, take the two keys to a dealer so the old key code can be copied to the new one.

Nov 05, 2009 | 2008 Chrysler Town & Country

1 Answer

Whirlpool Microwave Oven Serial Number MH660XW-0


Hi Adam,
Built in over the range? The models change so rapidly unless it is less than a year old there probably wont be an identical replacement, Fortunately the mounting brackets remain close if you stay in the same brand. Whirlpools can be purchased at almost any retailer like Lowe's, Sears, BestBuy etc. Measure the the original and look for one that fits that dimension.
Eric

Jun 09, 2009 | Whirlpool Microwave Ovens

2 Answers

ITS DOING NOTHING


I'V GOT A CASIO TK-2300 ELECTRIC CASH REGISTER.ON SCREEN IT SHOWING INDW OVER 0 WHEN I PRESS ANY KEY IT SHOW MAC-CODE 0 THE NUMBER PAD IS WORKING.IF I TURN THE KEY TO REG1,REG2,RF,PROGRAM IT STAY SAME BUT IF ITURN KEY TO X1,Z1,X2/Z2 IT SHOW OPE ERROR 0.CAN SOME ONE HELP ME TO SOLVE MY PROBLEM.THANK YOU.

Apr 16, 2009 | Casio Parts Cash Register PC Desktop

2 Answers

Programmed speed dial - internal calls


To add an Extension Key: -
DONT lift handpiece, enter [*91] then press a vacant memory key and then choose “Repdial Key” from the menu. Enter an extension or group number and press the [ü] key.

To dial an Extension Key: -
Lift handpiece.
Press the memory key you programmed.

Storing a personal speed dial number: -
Lift handpiece.
Dial [*92]
Dial memory number.
(*0 - *9 for personal numbers)
Press the [ü] key.
Dial 0 then the number to be stored.
Press the [ü] key.
Hang up.

How to dial speed dial numbers: -
Lift handpiece.
Dial [*7]
Dial memory number.
(*0 - *9 for personal numbers)
(001-999 for system numbers)
For Example: [*7*0 ü] will call the personal number stored under position *0.
[*7001 ü] will call the system speed dial number stored under position 001.

Jan 19, 2009 | Siemens optiPoint 500 Standard Corded...

5 Answers

Sharp EL531WH Calculator


I had the same problem... all you have to do is reset the calculator:

Type:
2ndF
ALPHA
It'll give you a choice Mem (0) or Reset (1)... press 1
Then it'll say Reset? (0)... press 0

And your calculator should be as good as new!

Sep 06, 2007 | Sharp EL-531VB Calculator

1 Answer

Interest conversion


Try hitting Enter after plugging in the numbers. That should make the numbers stay.

Oct 26, 2006 | Texas Instruments BA-II Plus Calculator

Not finding what you are looking for?
Sharp EL-1197PIII Calculator Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...