Question about Amana 24 in. ADW862EAS Dishwasher

Open Question

Getting error code 2h on front display - Amana 24 in. ADW862EAS Dishwasher

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Samsung washing machine has been put on and 2H appears on the screen


The error code 2H is not a standard Samsung error code.
You're going to need a on site technician that can access the machine's built-in diagnostic system to find the fault.
Sorry.
Have you unplug/turn off breaker to it for 10 minutes to see if it will do a hard reset? Do before calling tech.

Feb 25, 2018 | Samsung Washing Machines

1 Answer

How to solve error code 2h for samsung front loader


If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/

Sep 04, 2017 | Samsung Televison & Video

1 Answer

Samsung front load washing machine showing 2H error


Are you sure that it's a 2H error and not a H2 error?

Mar 09, 2015 | Samsung Washing Machines

1 Answer

Error code 2h


It not an error it sound like it on a delay of 2 hours

check out http://www.ehow.com/info_8759839_ge-dishwasher-error-code-2h.html

Mar 30, 2014 | Whirlpool Washing Machines

1 Answer

Display error H2


Gwnerally in sharp you cancel H2 doing a reset through code 14. did you do it yet?

Dec 03, 2011 | Office Equipment & Supplies

2 Answers

What is error code 2H


My Bosch dishwasher did the same thing. When the wash cycle starts, the dishwasher fills with water and then the heater is supposed to turn on to heat the water. If the water does not heat, then it will display 2H continuously. The heating element may be bad, but a more likely cause is with the control module. Bosch has a problem with the control module printed circuit (pc) board that powers the heater on many models. The solution requires some technical expertise and soldering skills. The details are explained in the document "Bosch dishwasher troubleshooting tips" on page 11. Download here
Bosch recommends re-soldering the connection, which is a temporary fix. The problem is that the copper conductor (called a trace) on the circuit board is not wide enough to handle the current required for the heating element, and as a result the copper trace overheats, causing the solder to melt on the relay connection. The best solution is to remove the control module PC board and solder a short length of copper wire between the pins to prevent the overheating problem, as shown in the attached photo (magnified portion of PC board). I did this on my dishwasher and it has been trouble-free for over 3 years.

44b4ffc3-8968-4b98-974c-3f089b887b96.jpg

Jul 07, 2009 | Bosch 24 in. SHU5305UC Built-in Dishwasher

1 Answer

2H accures in digital read out. NO Cycles start, just a humming


Do you own an LG LDF6810ST dishwasher? If not, please reply with the manufacturer name, model and serial number.
Are you saying that the display that normally shows the time is displaying an code of 2H? On an LG, that means 2 Hours, (120 minutes) and is not an error code.
On an LG with a symptom like this, I would arrage to replace the main processor card (PCB). You would be getting an error message if the motor (wash or drain) had failed.

Mar 30, 2009 | LG LDF6810ST Stainless Steel Built-in...

2 Answers

2H displayed and pump runs nothing else happens


I would check the buttons on the control they may stuck. check the delay button..

Dec 21, 2008 | Bosch 24 in. SHU53 Built-in Dishwasher

1 Answer

Error code 2H


The control panel needs to be replaced (indicated by the "2H" error code displayed at the start of the cycle).
BTW - The number 1 displayed at the end of the cycle indicates the cycle has timed out (i.e., it doesn't mean 1 minute remaining). Hence the continued running of the unit. Until you replace the control panel, you'll have to manually cancel the cycle at this point.

Oct 08, 2008 | Bosch 24 in. SHU53 Built-in Dishwasher

1 Answer

Unit ig giving a 2H error code


the problem is h2 not 2h you need to replace the thermistor or try to clean it by an ordinary cloth

Jun 17, 2008 | Sharp AR-153E Copier

Not finding what you are looking for?

Open Questions:

Amana 24 in. ADW862EAS Dishwasher Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Amana Dishwashers Experts

Mike

Level 3 Expert

4367 Answers

Raymond Ciccolilli

Level 1 Expert

18 Answers

Nathan Van Boven
Nathan Van Boven

Level 2 Expert

206 Answers

Are you an Amana Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...