Question about Tracfone Wireless ZTE Valet

1 Answer

Ckeyboard on phone so sensitive a letter above on next to it will appear, frusteratomg

Can the setting on touch be adjusted

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

After reading some information about the phone, most actually have the opposite problem, where they would like for the screen to be more sensitive. Now what I can tell you from working in the field for so long, is it does take some time getting used to where your finger actually touches the screen. If you notice the image I have attached, the point in which you may be used to touching things, and the point your finger touches the screen may be different. Now its been almost two weeks since this was posted, but if you are still having issues, I challenge you to really pay attention to where you are first touching the screen. Hope this helps out and good luck! ckeyboard on phone so sensitive a letter above on  - fae5fee7-c948-403a-bfd4-a1d43ce290d1.jpg

Posted on May 14, 2014

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set my clock on a 2004 Jeep grand Cherokee without the navigation disc or manual?


Hi Teresa, Im AL the owner of Big As Auto Repair.

Teresa, sense I'm not sure if you have a "Touch Screen Radio" OR a "Regular Radio" I'll tell you how it's done on both style's.

FIRST THE TOUCH SCREEN: Simply touch the time. Example: let say it's 12:00 O'clock, simply touch the 12:00 and it will open the time set and adjust the time.

REGULAR RADIO: Touch and hold the "TIME" which is next to the disk opening that you slide your CD into. By holding the time it will cause the time to start flashing, while it's flashing simply turn the knob that says 'PUSH AUDIO / SELECT" this will adjust the HOURS, should you need to adjust minutes simply push the knob and it will switch to minutes for adjustment.

Hope this helps and please visit my auto-repair-website at: http://www.bigasautorepair.com/

Nov 06, 2016 | Jeep Cars & Trucks

1 Answer

How to reset time/date


25592762-obkoyhm2j4njygclebv1o4cu-2-0.pngTwist the wheel on the top of the camera to Settings icon 25592762-obkoyhm2j4njygclebv1o4cu-2-5.png Then follow these steps:
1. Touch [General]
2. Touch [Date/Time Set]
3. Touch the Up and Down on [Year] tab or press the Up and Down button to adjust. Touch or press [OK] to set the [Year].
4. Touch the Up and Down on [Month] tab or press the Up and Down button to adjust. Touch or press [OK] to set the [Month].
5. Touch the Up and Down on [Day] tab or press the Up and Down button to adjust. Touch or press [OK] to set the [Day].
6. Touch the Up and Down on [Hour] tab or press the Up and Down button to adjust. Touch or press [OK] to set the [Hour].
7. Touch the Up and Down on [Min] tab or press the Up and Down button to adjust. Touch or press [OK] to set the [Min].
8. Touch the Up and Down on [AM,PM] tab or press the Up and Down button to adjust. Touch or press [OK] to set the [AM,PM].
9. Touch the Up and Down on [DST] tab or press the Up and Down button to adjust. Touch or press [OK] to set the [DST].

For a simulator view and instructions, follow this link:
http://samsungsimulator.com/output/service/simulator/c5ed71e7-d3c7-47ce-9c7c-a9b632320ee9/#!topic/settings/date_time_set

The manual for the Samsung WB350Fcan be downloaded here:
Global Download Center

Mar 19, 2015 | Samsung WB350F Smart Digital Camera,...

1 Answer

Why am I getting no emails on my tablet


To control sync settings for the device, follow these steps:


Android 4.0 / 4.1 / 4.2


  1. From the Home screen, open the Settings menu.
  2. Under Personal, touch Accounts & sync or Accounts.
  3. To turn on or turn off Auto-sync
    • Touch the switch at the top of the screen.

      settings-sync-4.0-sense.png settings-sync-4.0-touchwiz.png
      HTC Sense Samsung TouchWiz


      1. From the Home screen, tap the Menu key.
      2. Tap Settings.
      3. Tap the Connections tab.
      4. Tap Data Usage.
      5. Tap the Menu key.
      6. Check/uncheck Auto sync data.
  4. Touch an account to adjust settings, turn on, or turn off sync.
    • MobileLife Contacts
    • Google (appears if set up)
    • Microsoft Exchange ActiveSync (appears if set up)
    • Others, depending on apps installed
  5. To synchronize all accounts manually, touch Sync all.
  6. Press the Home key.



Android 2.1 / 2.2 / 2.3


  1. From the Home screen, press the Menu key.
  2. Touch Settings.
  3. Touch Accounts & sync.
  4. Under General sync settings, turn on or turn off:
    • Background data
    • Auto-sync

      settings-sync.png

  5. Under Manage account, touch an account to adjust settings, turn on, or turn off sync.
    • Exchange ActiveSync (appears if set up)
    • Google (appears if set up)
    • MobileLife Contacts / T-Mobile / T-Mobile Contacts
    • Others, depending on apps installed
  6. To synchronize all accounts manually, touch Sync all.
  7. Press the Home key.


Android 1.5 / 1.6


  1. From the Home screen, press the Menu key.
  2. Touch Settings.
  3. Touch Data synchronization.
  4. Turn on or turn off Auto-sync.
  5. Touch an account to turn on or turn off sync.
    • Gmail
    • Calendar
    • Contacts
    • Others, depending on apps installed

      g1_sync2.jpg
  6. Touch Menu.
  7. To synchronize all accounts manually, touch Sync now.
  8. Press the Home key when sync completes.

Feb 19, 2015 | Samsung Galaxy Cell Phones

1 Answer

TOUCH SCREEN


Initial Mode Function Setting Procedure

1. Remove the Compact Flash Cover [1].
2. Press the Warm Restart switch [2].
3. When "." appears at the center on the left-hand side of the screen, enter "3" from the
10-Key Pad.
4. Enter the 8-digit service code and touch [END]. (Default value: 00000000)

Initial Mode: Total Clear
Touch Panel Adjustment
Marketing Area
Image Data Clear
Clear FAX Setting
Date/Time Setting
Trouble Reset



• To adjust the position of the Touch Panel display
• Make this adjustment if the Touch Panel is slow to respond to a pressing action.
• When the control panel is replaced.
1. Touch [Touch Panel Adjustment] from the Initial mode screen.
2. Following the arrow mark, touch the four points (+) sequentially on the screen using a
pen.
NOTE
• Be sure to touch the very center of each point.
• Use care not to damage the screen surface with the tip of the pen.

Feb 12, 2014 | Konica Minolta Office Equipment & Supplies

1 Answer

The touch screen on my minolta 350 can't be displayed whenever i press exactly on the written box but below the written box it can normal be displayed, i figure out it must need some adjusts to put it...


Initial Mode Function Setting Procedure
1. Remove the Compact Flash Cover [1].
2. Press the Warm Restart switch [2].
3. When "." appears at the center on the left-hand side of the screen, enter "3" from the
10-Key Pad.
4. Enter the 8-digit service code and touch [END]. (Default value: 00000000)

Touch Panel Adjustment

Functions • To adjust the position of the Touch Panel display
Use
• Make this adjustment if the Touch Panel is slow to respond to a pressing action.
• When the control panel is replaced.
Adjustment
Procedure
1. Touch [Touch Panel Adjustment] from the Initial mode screen.
2. Following the arrow mark, touch the four points (+) sequentially on the screen using a
pen.
NOTE
• Be sure to touch the very center of each point.
• Use care not to damage the screen surface with the tip of the pen.

Feb 12, 2014 | Konica Minolta Office Equipment & Supplies

2 Answers

I dont want to be able to select something just by touching the little pad, i want to hafta left click, I'm constantly accidentally selecting something, just by touching it.


You can adjust your keyboard and the touch pad , controls with the adjustments in the menu for mouse and keypad options.
Also you can use the personal settings to get this right for your touch , adjusting the sensitivity accordingly

Sep 24, 2010 | Computers & Internet

1 Answer

Dell touchpad tab gone from mouse settings. tried installing driver with no luck. Also tried uninstalling and reinstalling driver.


Customizing the Touch Pad

You can use the Mouse Properties window to disable the touch pad or adjust
the touch pad settings.
1 Click Start , and then click Control Panel.
2 Click Hardware and Sound.
3 Click Keyboard.
4 In the Mouse Properties window:
• Click the Device Select tab to disable the touch pad.
• Click the Touch Pad tab to adjust touch pad settings.
5 Click OK to save the settings and close the window.

Apr 06, 2010 | Dell Studio 17 Laptop

1 Answer

New Konica bizhub C351 copier with only 58 copies. It will make copies but it has a 6 1/8" x 8 5/8" BLACK area in the center of the 8 1/2" x 11" copy if you make a copy from the platen glass. It does not...


Gray box after installation.
Solution
CAUSE: Installation procedures were not completed properly.
SOLUTION: Complete the installation procedures thoroughly:
1. Adjusting Touch Panel - Press the Accessibility key, Touch Panel Adj.
2. Setting Gradation Adjustment - Go into Service Mode, Image Processing Adjustment, Gradation Adjustment. Service mode- ulilty/counter, check details , then(Stop00 stop01)
3. Touch High Compression Mode and press Start [perform 3 times].
4. Touch Gradation Mode and press Start [perform 3 times].
5. Touch Resolution Mode and press Start [perform 3 times].
6. Date/Time Setting - go into Service Mode, Press Stop, 1, 1, 4, 4, Clear.
7. Go into Utility/Counter, Administrator Setting, System Setting, Date/ Time Setting.
8. Install Date - go into Service Mode, System 1, Install Date.
9. Serial Number Input - go into Service Mode, System 1, Serial Number [If Serial Number is already there, Clear and re-enter it].
10. Unit Change - go into Service Mode, System 2, Unit Change.
11. List Output - Please Load 8.5x11 Landscape paper on Tray 1, go into Service Mode, List Output, and Touch Machine Management List and press Start.
12. Press Adjustments List and press Start.
13. Press Service Parameter List and press Start.
14. Press Fax Setting List and press Start.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Sep 04, 2009 | Konica Minolta Office Equipment & Supplies

1 Answer

I have the inspiron1520 laptop, I want to dissable the touch pad. I only use an external Mouse. Regards Geoff Grigg


You can use the Mouse Properties window to disable the touch pad or adjust the touch pad settings.
  1. Click Start keyboar4.jpg, and then click Control Panel.

  2. Click Hardware and Sound.

  3. Click Keyboard.

  4. In the Mouse Properties window:

    • Click the Device Select tab to disable the touch pad.

    • Click the Touch Pad tab to adjust touch pad settings.

  5. Click OK to save the settings and close the window.
Please rate this solution.

Sep 20, 2008 | Computers & Internet

Not finding what you are looking for?
Tracfone Wireless ZTE Valet Logo

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tracfone Wireless Cell Phones Experts

Brad Brown

Level 3 Expert

18157 Answers

Harrie

Level 3 Expert

6740 Answers

patrick_j950

Level 1 Expert

31 Answers

Are you a Tracfone Wireless Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...