Question about Nostalgia Electrics Kitchen Appliances - Others

Open Question

KETTLE NOT HEATING - Nostalgia Electrics Kitchen Appliances - Others

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Kettle not heating up water but electricity is reaching the kettle


How to fix an electric kettle part 1 - YouTube

? 4:51
https://www.youtube.com/watch?v=P4dcq5p0FyU
Apr 15, 2013 - Uploaded by Anthony Findlay
how to troubleshoot and fix an electric kettle. ... I am using akettle had small problem the switch was not working so I have tried to fix it but I am ...

HOW TO REPAIR ELECTRIC KETTLE - Fix Your Electronics ...

electronicsolutn.blogspot.com/2012/10/how-to-repair-electric-kettles.html
Oct 25, 2012 - Electric Kettle is a kitchen appliance that contains a heating properties used for boiling water, cook food etc. It is made up of a metal or plastic ...

electric kettle light but not heating Questions & Answers - Fixya



Dec 08, 2015 | Hamilton Beach 40996 Programmable 1.7...

1 Answer

Why is my gold medal popcorn model # 2552 machine not heating to pop popcorn anymore?


A kettle not heating is either a switch, kettle wires, thermostat, or kettle heater.

Check that the kettle is plugged in tight, notice if the switch lights up when switched, then contact your local gold medal dealer for repairs. It is always cheaper to repair a gold medal kettle than replace.
http://www.gmpopcorn.com/domestic-dealers.cfm

Oct 01, 2014 | Gold Medal Kitchen Appliances - Others

1 Answer

My BELLA Theatre Popcorn Maker is not heating up. The popcorn kernels dont pop and the kettle is not heating up This is just the second time I used it. What is the problem???! Thanks


double check the kettle is firmly plugged in. If it is and not heating return to store. there are no repairs for that model machine.

Nov 26, 2013 | Kitchen Appliances - Others

1 Answer

No light, no water heating


The heating element may have failed.

Sep 11, 2012 | Braun WK200 Electronic Water Kettle...

1 Answer

It blew my fuse box, i have changed the fuse the light comes on but it is not heating up approx 5 years old


This happened to my Alessi kettle also. I changed the fuse in the plug but the kettle is dead! Red lights are on but the heating element in gone. From what i can gather parts are not available to fix it.


Feb 15, 2011 | Alessi MG32 Cordless Electric Kettle

3 Answers

The kettle leaks at where teh handle attaches at the bottom


Join the club ---I'm taking ours back this afternoon to BB&B. It's still under warranty and we have the receipt.

Nov 14, 2010 | Krups FLF2 Cordless Electric Kettle

2 Answers

Krups kettle leaks at base of pot


Unfortunately it's unfixable. A few recent Philips models do it as well and it's worst in hard water areas. Basically the cause is that a tiny bit of water gets into the bottom seam each time the kettle is used and leaves a residue behind when it dries out. Over time, the residue builds up and forces the seam apart so the leak gets worse.

All you can realistically do is hope that it's still under warranty and demand that Krups replace it, preferably with a different model. If they won't then you may have to exert whichever consumer rights exist in your country, but one way or another you need to stop using your kettle (it's dangerous!) and replace it with another.


May 21, 2010 | Krups FLF2 Cordless Electric Kettle

2 Answers

Krups electric kettle leaks


You cannot fix it when they split like that.

Apr 01, 2010 | Krups Stainless Steel Electric Kettle...

1 Answer

Breville kettle blew fuse (trip switch) now won't switch on


If the 'neon' light is on, the power is getting to the kettle, so if its not heating up then the element must have broken.

This kettle has a little white trip switch inside the 'socket' of the kettle (not the base unit). If its not heating, light is not on and the plug fuse is OK, then poke the white trip until it clicks.

Feb 07, 2009 | Breville Kitchen Appliances - Others

1 Answer

Kettle lights but doesn't boil


Most likely the thermo fuse is blown.

You have to take the kettle apart and see the spec for the thermo fuse. You can get these at most any electronics parts supplier for appliances.

To change the thermo fuse you will need the proper crimp type connectors and the crimp tool. This is not able to be soldered. It runs too hot, and soldering in a circuit close to a heating element is not able to be used.

Before changing the thermo fuse, you can test it with an ohm meter. It should typicaly read about 0.1 to 0.2 ohms. The heating element resistance should typicaly read about 8 to 12 ohms.

If the heating element reads below 6 to 7 ohms on a well calibrated ohm meter, or above 15 ohms, it is defective.

If the thermo fuse is blown, the kettle may have been left running when boiled out and over heated, or there is a short in the heating element.

If you feel that you are not comfortable to do this type of repair, it would be best to give the kettle out to an appliance service centre to have it serviced.

When you change the thermo fuse, and if it blows again the heating element is probably damaged. It must be replaced if possible, or if worth the cost.

On the other hand, if the kettle is more than a few years old and you don't want to go to all this trouble, you may want to consider to simply get a new one.

Jerry G.

Apr 29, 2008 | Kitchen Appliances - Others

Not finding what you are looking for?
Kitchen Appliances - Others Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nostalgia Electrics Kitchen Appliances - Others Experts

Anthony Ward
Anthony Ward

Level 2 Expert

397 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Gil Shultz

Level 3 Expert

3388 Answers

Are you a Nostalgia Electrics Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...