Question about Cisco Catalyst® WS-C3524-XL-EN 24-Port Ethernet Switch (WSC3524XL)

1 Answer

Cisco 3524 not receiving vlan info

I have created a vlan on a server switch and its not being received on the client switches. I checked the trunk ports and they are configured properly. Any ideas?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cisco Master
  • 7,733 Answers

Try this http://tools.cisco.com/search/results/display?url=http%3a%2f%2fwww.cisco.com%2fc%2fdam%2fen%2fus%2fproducts%2fcollateral%2fswitches%2fnexus-4000-series-switches%2f6701_catswitch_guide_v7_r5.pdf&pos=5&query=WS-C3524-XL-EN

Posted on Mar 09, 2014

Ad

2 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
EngineerMC

Martin Clarke

  • 186 Answers

SOURCE: How do I connect cable modem to cisco 3560 switch and configure it?

The cable modem will need to go through a router because it needs a NAT and PAT translation table, connecting the cable modem direct would lose the ability to get to the internet.

Posted on Jun 16, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How Do I Restore the Default VLAN Configuration of an Interface?


We can take S5700-28P-PWR-LI-AC as example.

The default VLAN configuration of an interface involves the default VLAN of the interface and the VLAN that the interface joins. By default, the default VLAN configuration of an interface is as follows:
Access: The default VLAN is VLAN 1, and an access interface joins VLAN 1 in untagged mode.
Trunk: The default VLAN is VLAN 1, and a trunk interface joins VLAN 1 to VLAN 4094 in tagged mode. That is, a trunk interface allows all VLANs.
Hybrid: The default VLAN is VLAN 1, and a hybrid interface joins VLAN 1 in untagged mode.
Dot1q-tunnel: The default VLAN is VLAN 1, and an dot1q-tunnel interface joins VLAN .1
Negotiation-auto or Negotiation-desirable: If the interface is negotiated as an access interface, the default VLAN configuration of the interface is the same as that of the access interface. If the interface is negotiated as a trunk interface, the default VLAN is VLAN 1 and the interface joins VLANs 1 to 4094 in tagged mode. That is, the interface allows all VLANs.
Run the display this include-default ' include link-type command in the interface view to check the link type of the interface, and then perform one of the following configurations to restore the default configuration of the interface.
Restore the default VLAN configuration of an access or dot1q-tunnel interface.
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo port default vlan

Restore the default VLAN configuration of a trunk interface.
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo port trunk pvid vlan
[HUAWEI-GigabitEthernet0/0/1] undo port trunk allow-pass vlan all
[HUAWEI-GigabitEthernet0/0/1] port trunk allow-pass vlan 1

Restore the default VLAN configuration of a hybrid interface.
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo port hybrid pvid vlan
[HUAWEI-GigabitEthernet0/0/1] undo port hybrid vlan all
[HUAWEI-GigabitEthernet0/0/1] port hybrid untagged vlan 1

Restore the default VLAN configuration of the Negotiation-auto or Negotiation-desirable interface.
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo port default vlan
[HUAWEI-GigabitEthernet0/0/1] undo port trunk pvid vlan
[HUAWEI-GigabitEthernet0/0/1] port trunk allow-pass vlan all

Jun 28, 2016 | Compex PS2216 16Port 10100Mbps Smart...

1 Answer

How to config vlan on switch 3cdsg8 and a router draytek 2920


You can configure trunks TRUNKS > Configuratio
n.

You can configure port to be part of that truck via TRUNKS > Members

Jun 16, 2014 | Draytek Computers & Internet

1 Answer

Vlan trunk on summit 24e2


Extreme uses tagged and I untagged instead of trunk/access, so it would look like this for a trunk:

conf vlan test add port gi1 tagged
(and of course you could put other VLAN's on this same port too since it's a trunk)
conf vlan user1 add port gi1 tagged

and this for handoff:

conf vlan lam test add port fa1 untagged

Feb 14, 2012 | Extreme Networks Summit 24e2 Networking...

1 Answer

Sir I have 4200 series 26 ports Switch i want to Configure intra VLAN But I am Getting a problem to Configure that switch . After Cnfigure VLAN on Consol prompt. I am not accessing to my Server & WAN...


Hi,
If you are creating only Layer 2 VLANs on the switch , you wont be able to ping the servers and Routers as they are in default VLAN1.
you can do the below steps
1. Create sub interfaces on the router LAN interface
2. Provide a new ip range to the new sub interface
3. Make the switch port connecting router as trunk, so that it will carry both the VLAN info
4. on your Labtop/PC give the IP address in the newly defined range
5. Make your switch port to be in the new VLAN

This will work , if you wont be able to configure the above settings, let me know i will give you the detailed config

Nov 01, 2010 | 3Com 4500 24-Port Ethernet Switch

2 Answers

Hello, I have a Linksys SRW2016 and 2048 switches with one cisco 1800 series router. I have successfully created two vlans on one switch and when i try to connect a trunk port to cisco router it...


Make sure that the frame encapsulation is set on the router to 802.1q on each of the sub-interfaces. You could also try fixing the speed and duplex on both the router and the switch in case there is a problem negotiating the speed and duplex.

Hope that helps!

Oct 04, 2010 | Linksys SRW2016 (745883562435) 16x1000...

2 Answers

IP Addressing by dhcp for vlans


tell each vlan about DHCP server using

ip helper <DHCP servers ip adddress>.

in config mode.

Mar 03, 2009 | Cisco Catalyst 2950 24x10/100 Mbps...

2 Answers

VLAN


no competent guys out there ???

Apr 19, 2008 | IFS EtherNav D7600 8-Port Ethernet Switch...

1 Answer

Cisco error on switch


%SYS-4-P2_WARN: 1/Tag 0 The switch generates %SYS-4-P2_WARN: 1/Tag 0… messages.
This example shows the syslog output that you see when this error occurs:
%SYS-4-P2_WARN: 1/Tag [dec] on packet from [ether] port [chars],
but port's native vlan is [dec] This message indicates that an 802.1Q-tagged packet was received on a nontrunk port. The VLAN that is derived from the packet tag is different from the port native VLAN. In the error message:
  • The Tag [dec] is the VLAN identifier from the packet.
  • The [ether] is the host MAC address.
  • The port [chars] is the port identifier.
  • The second [dec] is the native VLAN number.
There is a possibility that the local port is incorrectly configured as an access port instead of a trunk port. Alternately, the remote side can have been configured as a trunk port instead of an access port.
Verify that the local port is not incorrectly configured as an access port instead of a trunk port. Also, verify that the remote side is not configured as a trunk port instead of an access port.

Feb 06, 2008 | Cisco Catalyst 4006 Chassis ( 4006)

Not finding what you are looking for?
Cisco Catalyst® WS-C3524-XL-EN 24-Port Ethernet Switch (WSC3524XL) Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Jeffrey Groves
Jeffrey Groves

Level 3 Expert

573 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...