Question about LG LMX25981ST Stainless Steel Bottom Freezer French Door Refrigerator

Open Question

Refrigerator wont run at all dont start up but all lights work and fuse is good

Reset the main board ran a short while then stopped running. light switch was bad replaced it.

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: Refrigerator is 2years old. The refrigerator is not working but

Hi,
There are a few reasons why the refrigerator part will not cool...here are a couple of tips that will help you to figure out why the refrigerantor is not cooling...

Refrigerator2_bing.gif not Cooling or Fridge not Cooling
https://www.fixya.com/support/r3662945-refrigerator_not_cooling_or_fridge_not

How to Defrost Refrigerator Defrost Timer Problem
https://www.fixya.com/support/r3771673-defrost_refrigerator_defrost_timer

heatman101

Posted on May 24, 2010

Ad

Matt Ace Appliance

  • 311 Answers

SOURCE: refrigerator stopped working

sounds to me like you have a bad relay on your main control board. It will be located on the back wall of the unit or down by the compressor on older models. The other possible clicking noise would be your starting components on the compressor. You will have to determine where the clicking is coming from and I would start by replacing either the board or the starting components. You could also do a visual inspection on the board for burn spots. Hope this helps. MJ

Posted on Jul 30, 2010

heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: Plug it in, it starts,

Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Hi,

Many times a freezer and/or refrigerator do not work right because of a dirty condenser coil...there are also many other things that can go wrong.


If you are hearing a clicking or buzzing then check out the last two tips.

If your refrigerator is running but warm, then…

Check out this tip that I wrote about that... it is a great place to start trouble shooting your unit...and something that you can do rather then calling a repair person to do a simple thing for you...

Refrigerator Condenser Coil Cleaning Refrigerator Repair

Refrigerator Troubleshooting Refrigerator Compressor

Refrigerator Compressor Start Capacitor and Start Relay


heatman101

Posted on Sep 12, 2010

hkuendig

  • 1 Answer

SOURCE: Refrigerator is getting no power compressor does

If it feels like the whole thing is dead in the water, then it is probably your fuse in the back. always include the year and the make of your unit. then people can help more. fuses on modern refrigs are mounted on the circuit board in the back and have to be soldered off and on.

Posted on Sep 23, 2010

Macmarkus

Mark MacDonald

  • 2605 Answers

SOURCE: My refrigerator stopped working after the power to

Hello, welcome to FixYa. I just read your post and based on the info provided it certainly sounds like a control board has been damaged. The PCB (main board) at the back is part #6871JB1280P for about $70 at vendors on-line like "repairclinic.com". There is not much you can do short of what you've tried (unplugging) unfortunately. Let me know if I can help in any other manner. Good luck. Regards, Macmarkus :)

Posted on May 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 honda shadow 750cc wont start.key off ...tried hooking up led lights.. ran 2 grey wires from led lights together to headlight fuse turned key on ran 2 black wires from led lights to ground


Hi, Arleen before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter have failed or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Won crank over ACE Help Needed
cant start my 750 shadow
Honda 1998 VT750C Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda VT750C Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 22, 2017 | 1999 Honda VT 750 C2 Shadow

1 Answer

How do I find the fuse panel on LG model LSC269055b refrigerator


I think your model number is actually LSC26905SB
There isn't a fuse panel, per se. If I remember your model correctly, the main board is on the back, so pull your refrigerator out, unplug it, and take off the access cover located about halfway up your refrigerator's back. Look at the fuses on the main board. There is a 20 amp fuse that blows easily (the newer boards have a slower blowing fuse in them, now). Temporarily jumper the 20 amp fuse and then plug your refrigerator back in. If you hear relays clicking and such, that's good. The compressor should start up shortly afterwards and all the lights should be on in your refrigerator.

After you have verified operation, go to Radio Shack, or somewhere similar and get yourself a 20 amp slo-blo (slow blowing) fuse and solder it on top of the old fuse on your main board.

Remember to always unplug your refrigerator when dealing with the main board and power circuits.

Good luck and let me know if you need any more help.

Nov 17, 2014 | LG Refrigerators

2 Answers

Refrigerator does not appear to be getting power, no lights, don't here motor running


If you have no lights or hear the motor running, I would check the house circuit breaker first and measure the voltage at the outlet. If that is within specs then the one thing that could cause your problem in the refrigerator is the power control board P/N: 6871JB2047A

Sep 18, 2011 | LG LFC23760ST Side by Side Bottom Freezer...

1 Answer

History: 2 days ago the battery light came on. Car ran fine that evening. The next morning. The tach stopped working. a minute later the speedometer stopped working. Then, another minute later, the car...


Replacing the fuse the first time was the right move, becuase it could have been a fluke that it blew. Replacing it again and again was not! You should have found out EVERYTHING that the #2 fuse controlled and verified that the components weren't pulling excessive amperage (shorted condition). By replacing the fuse over and over, you might have made the problem worse by subjecting good components to something that was shorted.

BTW next time pick the oldest guy at autozone to help you, if the counter help knew their stuff they would have told you the same thing I just did!

Sep 04, 2011 | 2000 Ford Contour

2 Answers

Frigidaire FRS26ZSH -ice & water dispenser panel lost power


I think you will need to unplug the pin plug under the cover at top or bottom hinge. Check the voltage and if OK leave unplugged until you can remove the dispenser and I will try to help you from the power source. Sounds like a short in the board and related to the light socket. The fuse only stopped the short from doing further damage, You may need to locate the short before replacing the fuse or board. I have looked over the wiring diagram. If you find the short without my help just be sure to replace the fuse with the correct size. The only things are the chute heater or something in that area of the board went to ground. Do you have a voltage meter? Contact me later when ready, Sea Breeze

Jan 20, 2010 | Frigidaire FRS3R5EMB Side by Side...

1 Answer

GSS201EPH WW Refrigerator does not run.


These symptoms indicate that the main control board is bad . The compressor relay ( one of the black boxes ) is bad . Have to replace the complete board . Without the model number , can't give you the part number . Take the model number with you when you go to get the part ( or order the part ).

Sep 08, 2009 | GE GSS20IEP Side by Side Refrigerator

3 Answers

Car wont do anything lights dont work or anything at all


first take the wire loose then under the hood there should be a fuse box there should be some big fuses 30 40 50 amp fuese one of them should be main fuse check it and all the rest of them

Jan 24, 2009 | 2002 Kia Rio

1 Answer

Refrigerator does not run. Exterior indicators flashing on and off.


jsrock, if you can do some voltage checks we can help you with this board issue. The thing thats throwing me is the clicking you are hearing. On that board, on the bottom you have a three pronged harness that is blue. Should say J8, J9 and J4 which is line. Get some jumper wire with clips on each end and jump line to compressor, J4 and J8.(Rev1 boards was J11 and J8). You are now sending 120V directly to the compressor and if it is good, it should start and you can rule it out. After this, unplug the J2 connector from the board. Check for 12VDC, not AC, at pins J2-8 to J2-3. If you do not have that voltage, replace the main board. If you do have that voltage, you have a short in either the condensor fan motor or evap fan motor circuits. Carefull, you will be working around live juice here. Catriver...post back.

Sep 29, 2006 | GE PSS26SHRSS Side by Side Refrigerator

Not finding what you are looking for?
LG LMX25981ST Stainless Steel Bottom Freezer French Door Refrigerator Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

deecee73

Level 1 Expert

8 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a LG Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...