Question about Yamaha 1,000 Watt Portable Generator #EF1000ISC
Haven't started this generator in almost two years. I changed the spark plug; fresh gas, oil is clean, stopped an apparent leak in the carb., but still won't start.
After removing the carb, disassembling and blowing it out (twice) to no avail, got a one gallon can of Gunk Parts and Carburetor dip. Removed the carburetor (again), removed float bowl cover, gasket, float, and needle valve and soaked it in the cleaner for several hours. Blew it out (again) and reinstalled it. Now generator starts on first pull like new!
Posted on Sep 14, 2009
I have the same problem. i took out the air filter and sprayed tb into it and it ran and died. this is the only way to get it to fire up.
i took off the carb, dissasembled it and blasted it out with tb cleaner, took out the jets too, put it all back and it still does the same thing. it is getting fuel but it won't run.
need a profesional answer on this one please.
Posted on Jul 05, 2009
Remove the air filter and squirt a little gas into the carburetor. If it starts and dies, you'll know it's the carb. Probably varnished up from old gas. ALWAYS use fuel stabilizer in a generator
Posted on Jun 13, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Sep 14, 2011 | Briggs Stratton H7159 & Stratton® 5500,...
Jul 18, 2011 | Coleman Powermate Powermate 5000W...
Aug 28, 2010 | Yamaha 4500 Watt Electric Start Generator...
Jul 22, 2010 | McCulloch FG6000MK 5700Watt 13 HP 338CC...
Jan 28, 2010 | Briggs Stratton 020273 Elite Series...
Jul 02, 2009 | Ryobi Garden
Apr 03, 2009 | Electrical Supplies
Mar 21, 2009 | Mantis 2-Cycle Tiller
Nov 14, 2008 | McCulloch 13HP 338 Cc Portable Generator #...
3,217 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: