Question about GE WHRE5550K Top Load Washer
Posted by Anonymous on
Tips for a great answer:
Sep 14, 2015 | Washing Machines
Aug 20, 2013 | Maytag Atlantis MAV6000 Top Load Washer
Nov 01, 2012 | Washing Machines
Pull the liquid softener dispenser off the top of the agitator. Pull the clear plastic cap out of the center of the agitator. Use a ratchet and socket set to remove the hex head bolt from the center of the agitator. Lift the top half of the agitator out of the washer. Pull the bottom half of the agitator straight up to remove it from the drive motor shaft, and remove the bottom half of the agitator from the Cabrio washer.
Mar 22, 2011 | Whirlpool Cabrio WTW6600SBT Top Load...
first thing to check when your GE washer is not agitating, is the belt.
Let me tell you how to check the belt & the clutch with out having
to take the washer apart.
The belt: Set the timer in the spin cycle and pull the timer knob to turn the washer on.
If the washer drains the water and then spins the way that it should, this tells you that the motor, belt & clutch are not the reason why your washer won't agitate.
A broken belt could be the reason your washer is not agitating or spinning.
The agitator: After making sure that the belt, motor & clutch are working ok, lets check the agitator.
The agitator uses a plastic agitator coupler that is couple to the transmission shaft by using splines cut in the coupler and on the transmission shaft.
Too much usage or overloading the washer too many times will wear the agitator coupler splines. With out the splines the coupler could not be coupled to the transmission shaft and that could be the cause why your washer is not agitating.
The clutch: A
bad clutch could also be the reason the washer won't agitate or spin.
Usually when the clutch is bad the washer will be noisy, like when you
have bad brakes on your car.
The transmission: The
transmission could be the reason your washer is not agitating. A common
problem with the transmission is oil leaking right on top of the motor
pulley and the belt.
As you can see, there could be different reasons why your GE washer is not agitating. You just need to keep checking each part until you find the problem and replace the part responsible.
Oct 03, 2010 | GE WSXH208A Front Load Washer
Mar 01, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...
Feb 27, 2010 | GE WBSR3140DW Top Load Washer
Oct 10, 2009 | Whirlpool LSN1000LW Top Load Washer
Jan 11, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: