Question about Windsor SR12 Sensor Bagged Upright Vacuum

Open Question

How do you reset a sensor SR12 vacuum

The brush will not work.

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix sensor s12. red light for bag stays on even when vacuum bag is not full and the vacuum is clear


You most likely will need to change the Yoke assembly. There is a sensor built in that gets clogged with fine debris over time. This will take care of the problem.

Feb 09, 2015 | Windsor SR12 Sensor Bagged Upright Vacuum

1 Answer

How to trouble shoot a brush warning light


What color light are you referring to? If it is one of the green lights that is normal for the up and down adjustments. If it is the red one that is another issue. If it is the red one, what does it do while it is on? Does it flash or is it on solid?

Jun 17, 2014 | Windsor SR12 Sensor Bagged Upright Vacuum

1 Answer

Do; you use #1 or #4 for hardwood and tile floors


Use the 1 setting. The brushes spin but it is a soft brush and will not scratch. Make sure the thin rubber squeegee behind the brush is still in good shape. That prevent dirt from being kicked out behind the vac. Hope this Helps

May 07, 2011 | Windsor SR12 Sensor Bagged Upright Vacuum

1 Answer

My windsor vacuum brush light keeps coming on


You may try a new brush. With these models the light will continuously run to signal it needs the brush replaced.

Jan 29, 2011 | Windsor SR12 Sensor Bagged Upright Vacuum

1 Answer

I have windsor s12 vaccum this one have brush up light on


The windsor Sensor brush indicator light will come on when:

  • Something stuck in the brushroller
  • Brushroller is worn and needs replacement
  • height is wrong (indicates a problem with height adjustment)
  • a bad circut board/sensor
more than likely your brushroller just needs to be replaced, very common.

Jun 03, 2009 | Windsor SR12 Sensor Bagged Upright Vacuum

1 Answer

I have a kenmore beltless upright the beater brush dosetn spin


If it is direct drive then the motor or the wireing to the motor are bad. If it is gear driven then the gears are probally stripped.

Apr 11, 2009 | Windsor SR12 Sensor Bagged Upright Vacuum

1 Answer

Vaccum doesn't have power.


I had one of these come in for service, a new mainboard was the solution. They're getting power if the lights come on. The board just isn't letting it go.

Best of Luck!

Oct 29, 2008 | Windsor SR12 Sensor Bagged Upright Vacuum

3 Answers

Windsor sensor sr12


There is a downloadable manual from http://www.windsorind.com/ go to documents, and note it is in alphabetical order -- so page through to "sensor" or you can search on the word "sensor" (don't include SR12). Also excellent training video on youtube http://www.youtube.com/watch?v=ikhtNFEKpeg.

I think, but not validated yet, that the Sensor SR12 (residential model) has been discontinued as I found it listed in their manuals under the discontinued section as well.

Jan 28, 2008 | Windsor SR12 Sensor Bagged Upright Vacuum

Not finding what you are looking for?
Windsor SR12 Sensor Bagged Upright Vacuum Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Windsor Vacuums Experts

Mike

Level 3 Expert

4363 Answers

Strech
Strech

Level 3 Expert

1562 Answers

Raymond Richards
Raymond Richards

Level 3 Expert

407 Answers

Are you a Windsor Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...