Question about Amana Cooktops
Was told its the igniter cud you tell where i can find the oven igniter model number please
Posted by Anonymous on
You will only need the make and model of the cooktop to order the ignitor. Open the bottom drawer below the oven to find the data plate with model & serial #'s on the front of the oven.
Posted on Mar 19, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: No Ignition
Dirt. Spilled oil, grease, milk etc. act as isolator and prevent contact between burner and casing (mass). You need to clean up burners, scrub all the dirt and make sure their seats are cleaned too (brass elements below burners).
Posted on Apr 09, 2008
SOURCE: ignition sparking repeatedly
I have a Creda gas stove ,yesterday some water boiled over. I have a continuous spark ever since and the stove is not even on. Is there any way to reslove this without calling a repair person?
Posted on Jul 22, 2008
SOURCE: I have a 2003 gas
You probably have a bad ignitor in your oven. The gas will not turn on until the ignitor glows red hot - less resistance and more current for valve to open. This can be replace by a repairman or a tool savvy homeowner. If you call a repair man, your looking at 150.00 to 200.00. Part can be from 50.00 to 110.00. I usually charge 110.00 plus the price of the ignitor.
Posted on Aug 04, 2010
Here is a tip that I wrote to help people troubleshoot problems with their cooktops not igniting.
Cooktop Range Stove spark ignition does not work
Posted on Aug 18, 2010
SOURCE: When I attempt to light
u can solve this problem by cleaning off the igniters. first of all unplug it from the power. Then take a small wire telcom pic tool to scrape the white and brown deposits from the sides of the igniters. You could probably use something else similiar to do the scraping. I noticed a shiny surface underneath. then go ahead and scrap it and brushed clean the mating surface where the spark travels. then vacuumed up the mess. your burners all worked great after this.
Turned off the power, removed the five knobs and corresponding rubber rings, and used a hair dryer on the five holes where the knobs were for about ten minutes in total. Hey presto, when I turned the power back on.
Posted on Sep 07, 2010
Tips for a great answer:
Sep 10, 2014 | Kenmore ELITE 790 30 FREESTANDING DUAL...
Sep 07, 2014 | Frigidaire Stove / Oven / Range Cooktop...
Sep 05, 2014 | Frigidaire Gas & Electric Stove/Oven/Range...
Sep 11, 2011 | Maytag MGC5430BDS Gas Cooktop
Jun 19, 2011 | Magic Chef 30 in. 8241RT Gas Cooktop
Dec 19, 2010 | Thermador 37 in. SGSX365 Gas Cooktop
151 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: