Question about Whirlpool RBD305PD Electric Double Oven

Open Question

SCHEMATIC FOR GBD307 OVEN

NOT WORKING AT ALL

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Cindy Wells

  • 6063 Answers

SOURCE: Display E2 and F3-oven locked automatically on a Whirlpool built in oven GBD307

The F3 E2 error means that the oven high temperature sensor is reporting an over-temperature event. This could be a problem with the sensor, the oven control unit or the wiring. The oven needs to be unplugged (or the circuit breaker turned off) and then you can check the sensor. Since this is a built-in oven, you may want to get a professional to look at it. The oven has to be pulled out of the cabinet; if you do it yourself, make sure to get another person to help.

You need to open the rear access panel that covers the control (ERC) and the lower panel over the back of the range. Then find the sensor and trace it's wiring up to the ERC. Disconnect the wires from the ERC. Then with a multimeter, check the resistance of the oven temperature sensor. It should give a reading of 1000-1200 Ohms. Then the ERC may be faulty.

However, some people report that just disconnecting and then reconnecting the wiring will solve the issue. In that case, a bit of debris may have gotten into the wiring harness.

I hope this helps.

Cindy Wells

Posted on Jan 20, 2015

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool gbd307 why will The upper oven not work but the lower oven works


Have you checked the heating element supply voltage with a VOM? And have you checked for a popped/burned fuse to the bake element?

Aug 06, 2014 | Whirlpool GBD307PDS Electric Double Oven

1 Answer

Why my whirlpool GBD307 double oven top oven will not cut on, but the bottom one will. but after heating up, the oven starts blinking the start? button but it will not cut off, it shows a error code F


that's a bad touch panel or key panel,the number you sent isn't the full model number off of the oven so when you call to order the part you will need that.if you try to fix this yourself make sure the power is off.good luck

Nov 07, 2017 | Whirlpool GBD307PDS Electric Double Oven

1 Answer

Getting a E6 F2 error code on my Whirlpool GBD307 Oven


F2 - E6 Cancel key drive line open1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).

Nov 26, 2010 | Whirlpool Ovens

1 Answer

GE double convection oven model GBD307 has stopped working.


my bake element stop working it is hidden and can't find out where i need to replace it,whirpool can you help

Dec 19, 2009 | GE Ovens

1 Answer

Ilost my manual for my whirlpool selfcleaning oven Accubake DUO how do i clean it


Hello Su Flynn,

Here's the page with the owner's manuals that you can download for free. Just click on your particular version of the GBD307 Series ovens, as there are several variations of them!

http://shared.whirlpoolcorp.com/product_literature/search_results.jsp?searchTerm=GBD307&siteCd=MT_EN_US

You can an electronic copy of it and print it out if you wish.

Again, just chose your version from the list I provided the link to and you'll be all set with having all the instructions needed for cleaning, along with use and care guidelines that you'll find helpful.

Hope you find this Very Helpful and best regards!

Dec 10, 2009 | Whirlpool GBD307PDS Electric Double Oven

1 Answer

Whirlpool Gold Series double oven electric model GBD307-PDQ309


Usually this is a touchpad and control panel fault but the only way to know for sure is to do some electrical testing with a volt/ohm meter and the wiring diagram located within the appliance.

With the model number of the oven we could look up the code and be more specific about the problem.


Go here for: http://www.repairclinic.com/Whirlpool-Range-Stove-Oven-Parts

RepairClinic.com

asplogo.jpg?ver=23
appliance parts, help & more

Apr 09, 2009 | Whirlpool RBD305PD Electric Double Oven

1 Answer

How do I get into the fuse to change it on my whirlpool GBD307 PDQ7 oven? Where is it located?


There are different fuses, a fuse is located on control assembly board, a thermal fuse is accessible removing a panel at the back of the oven, or inside the oven.

Enter here to find assembly diagrams and parts for your model.


Contact the seller by phone if part is not listed on the website.

Jan 02, 2009 | Whirlpool GBD307PDS Electric Double Oven

5 Answers

Whirpool GBD307 - Display not working


We had the same error codes F2 E6. We were told to turn off the breaker to the oven for 5 minutes and then turn it back on and it will reset itself. We tried it and it worked! Whirpool wanted to send someone out on a service call. Thank goodness we didn't!

Mar 28, 2008 | Whirlpool RBS245PDS Electric Single Oven

Not finding what you are looking for?
Whirlpool RBD305PD Electric Double Oven Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...