Question about Minn Kota Endura 30 Freshwater Transom Mount Trolling Motor
Only high speed forward and reverse work. None of the other speeds work. I have installed a new rotary switch with the same results. I supect I have a problem in the motor fields but can't find a wiring diagram that shows how and where the four wires going to the motor housing are connected in the motor housing. The correct resistance measurement between the wires would be helpful.
Hi I brought a new min Kota endura max 55 ,I hooked it up to my 12 volt battery turned it on forward it runs ok put in reverse it's ok backin forwards ok then back in reverse nothing, any suggestions ty rich klein
Posted on May 24, 2019
The coil pack is likely bad especially since you changed the switch. call minkota and get the bench tast info (very simple) and then order and replace the coil pack about 26 dollars. be very careful how you put the magnet assembly back together and mark the position of the case on the outside before disassembly. order a new seal kit and use locktite on the shaft again when reassemling to seal the shaft tube for water. dont run motor uout of the water much as it uses the water to cool the shaft and you can damage the seals. good luck.
Posted on May 16, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Sep 28, 2014 | Minn Kota MinnKota MK110P Marine Portable...
May 22, 2011 | Minn Kota Endura 55 42 In Trolling Motor...
Jun 25, 2010 | Minn Kota Endura 30 Freshwater Transom...
Feb 18, 2010 | Ingersoll Air Tools & Compressors
Oct 05, 2009 | Boating
Jan 14, 2009 | MotorGuide STANDARD MOTOR REPLACEMENT...
Nov 23, 2008 | Craftsman Garden
Sep 01, 2008 | Minn Kota Endura 30 Freshwater Transom...
1,564 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: