Question about Timex 40131 Wristwatch
I replaced the battery but can not get the back to snap back into place
I have mildly dent the back lid of Armani watch.
Any idea where can I find watch lids?
I have already purchased a watch press now.
Posted on May 08, 2019
I struggled trying to get the back on a Timex watch. I tried all suggestions on internet and still could not get it to snap on. I even got my son in law to try. He could not get it either. You can save money changing your own watch batteries and the batteries are pretty cheap on line. So get a watch case press and don’t struggle with any of the suggestions on how to get the case back on without a special tool. Press is under &15.00. Once you have changed your own battery twice it has paid for itself.
Posted on Dec 25, 2018
Gently filed the edge a bit, then viola! two thumbs and it popped in
Posted on Nov 04, 2018
You are much better off investing in a watch case press. These are simple to usee and can be adapted to all sIves of watch.
Posted on Aug 21, 2017
I used the end of a rubber mallet mallet handle- round & flat. Pressure applied from opposite side of where you opened it towards that opening point.
Posted on Jul 19, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
First open your bracelet. Then align groove in caseback with crown and press that side lightly into the case. Then using both hands(one from dial side, another from back) press as strong as you can.
If this do not work:
Get mens leather belt and place it on flat surface(table top). Lay the watch face down on that belt. Again adjust caseback as before and using your weight push caseback down with both hands.
NEVER use hammer or similar.
If none of these works- go and see your nearest watchmaker.
Posted on Dec 21, 2008
Try a very small dab of a very light lubrican on the sealing edges.
If you haven't already tried it, press the edge of the watch back using two fingers and move them appart until they meet again.
Season with a lot of parience... good luck!
Posted on Apr 20, 2010
SOURCE: watch battery replacement
I used a modification of the vise solution. I put a plastic bottle screw cap on either side of the watch (bottle side in) and tightened the vise. I heard a satisfying "pop" and I am on my way. Fred
Posted on Oct 07, 2007
Tips for a great answer:
Jan 28, 2015 | Dakota Watches
Jun 28, 2011 | Watches
May 10, 2011 | Timex Ironman 30 Lap 53952 Wrist Watch
Feb 25, 2011 | Watches
Jan 16, 2011 | Timex Watches
Place the tip of your pocket knife in the slot on the back of the watch. Pry the back off.
Take your tweezers and grasp the metal piece that is hiding the battery.
Once that metal piece is out the battery should come out too.
Put the new battery in and cover it with the metal piece.
Put the back of the watch back on and snap it into place.
Oct 04, 2010 | Colibri PWS-95877-N Pocket Watch
Aug 28, 2010 | Skagen 358XSSLPD Wrist Watch
Apr 23, 2010 | Columbia All Sport Digital watch
Aug 09, 2008 | Timex Expedition 40141 Wristwatch
Sep 26, 2007 | Skagen 355LGSC Wrist Watch
34,878 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: