Question about Nortel Norstar Modular ICS MICS 4.1 Software - Like New

1 Answer

How do I fix voice mail and auto attendant features lost on Nortel Norstar mics 4.1

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 244 Answers

You can restore a recent configuration backup from diskette but if you don't have a backup you will need to rebuild the configuration from scratch. You may also have a failed hard drive or a failed supercapacitor that did not retain memory when the power was cycled. These components will need to be replaced before you continue with reprogramming.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/dave_fb2c45146b845cea

Posted on Dec 22, 2014

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I press memory buttons on one particular telephone in our office they all dial reception. How do I fix this?


PDF]Telephone Features Programming Guide - Avaya Support

https://downloads.avaya.com/css/P8/documents/100142941 AvayaNORTEL NETWORKS is a trademark of Nortel Networks. ... All other trademarks and registered trademarks are the property of their ... One-line and two-line displays . ...Memory buttons . ... Call anomalies for telephones without line buttons . .... Select how you dial your calls . ... Receive a busy signal on an internal call .

Norstar How to program phone how to program voice mail ...

www.phonserv.com/1_PDF_user_guide_meridian_norstar_phone_syste...
Nortel Networks Meridian Norstar How to program voice mail phone feature codes ...Modular ICS KSU must be programmed with an M7310 or a M7324 telephone. ... Lift handset, press Voice Call key or press the Feature button, then press 66 2. .... At the LOG: prompt, enter your mailbox#(extension #. and your password all ...

[PDF]N QRTEL NORSTAR


Jan 18, 2016 | NorStar M7324 Telephone

1 Answer

Nortel t7316e


Hi D,

You should go into your voice mail and check your Outdial settings. If Outdial is turned on, you`ll need to deactivate call forward from there.

Sep 06, 2013 | Nortel Norstar 16-Line PBX Speakerphone

1 Answer

Admin nortel i can't access the adminstrative programming. i enter feature 983 and it says "inactive feature". how can i fix it to where i can set up a new mailbox?


If you are getting inactive feature when entering feature 983 the phone system and voice mail unit are not communicating. This usually requires a power reset to clear. Or the voice mail unit is in trouble and a vendor needs to be called.

Aug 12, 2013 | NorStar T7316E Corded Phone

1 Answer

CP100 Auto Attendant transfers direct to voicemail


The norstar extension may be setup up for Call Fwd to voicemail, or call fwd/busy. Also, Custom Call Routing may be setup to send the caller directly to the mailbox.

Nov 10, 2009 | NorStar CallPilot 100 Voice Mail, 10 mail...

1 Answer

Auto attendent voicemail locked


Go to this phone press feature 983 this takes you to admin change mail box .The general mbox is 100 this is the mbox you want to change

Oct 09, 2009 | NorStar M7324 Telephone

1 Answer

Change voice message on nortel meridian phone system


You need to go in to voice mail admin .
Feature 983 1020000
press AA
press Greeting
press greeting again
enter 1 for greeting 1
this should be your main greeting it could any greeting from 1- 20 , it depends on how it was set up but that should work fine .

Feb 17, 2009 | Nortel Norstar 16-Line PBX Speakerphone

1 Answer

Individual phone disabled after power outage


It sounds like the phone lost its programming of feature buttons. To reprogram them, press "Feature (star) 3" press the button to be programmed, and enter the feature code for the feature to be programmed:
Transfer -- Feature 70
Call Fwd (to mailbox) -- Feature 984
Call Fwd (to another ext.) -- Feature 4
Transfer caller to mailbox -- Feature 986
Page (general) -- Feature 60

Hope this helps!

Jan 30, 2009 | NorStar MICS v.6.1 w/ CallPilot 150 (48...

1 Answer

Unit will not access call pilot


Start with "Feature 9 (star) 1" from a Norstar telephone, to view the CallPilot Feature Code list. Then enter the System Administration feature code.
Good Luck.

Sep 04, 2008 | NorStar Compact Ics WithClid Trunk Mod...

2 Answers

Norstar Mailbox Problem


The mailboxes don't need to have saved messages, to be full. More then likely what is happening is that when people call in, they are getting a generic/Auto Attendant vm box, and that one is full. Try checking vm box #100, or #10. That is the Nortel standard general delivery vm box. Please let me know is this helps, or if you more help.

May 25, 2007 | NorStar M7310 Corded Phone

Not finding what you are looking for?
Nortel Norstar Modular ICS MICS 4.1 Software - Like New Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nortel Computers & Internet Experts

Vuk B

Level 3 Expert

717 Answers

ray gallant
ray gallant

Level 3 Expert

65435 Answers

Scott Fryer

Level 2 Expert

106 Answers

Are you a Nortel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...