Question about Sharp AR-M237 Copier

Open Question

WHEN I PRESSE THE START KEY I RESEVED F&2 WHAT IS THE PROBLEM?

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ink absorber full


1. Press the Menu & Mono start keys. Next press the up arrow key 4 times to make the machine enter the maintenance mode.

2. Enter 8 & 0 by using the up arrow key & SET keys.

3. Press the mono start key several times untill the purge count appears on the LCD.

4. Enter 2 7 8 & 3 by using the up arrow key & set keys to reset the purge count to zero.

5. Press the stop/exit key to return to the initial stage of the maintanance mode.

6. Enter 9 twice by using the up arrow & set key's to exit from maintenance mode

i hope it helps

Sep 26, 2013 | Brother DCPJ125 All-In-One Inkjet Printer

1 Answer

Ink waste reset


USE THIS AT YOUR OWN RISK !
1. Press the Menu & Mono start keys. Next press the up arrow key 4 times to make the machine enter the maintenance mode.

2. Enter 8 & 0 by using the up arrow key & SET keys.

3. Press the mono start key several times untill the purge count appears on the LCD.

4. Enter 2 7 8 & 3 by using the up arrow key & set keys to reset the purge count to zero.

5. Press the stop/exit key to return to the initial stage of the maintanance mode.

6. Enter 9 twice by using the up arrow & set key's to exit from maintenance mode

i hope it helps

Sep 23, 2013 | Brother DCPJ125 All-In-One Inkjet Printer

1 Answer

Ink absorber full


USE THIS AT YOUR OWN RISK !

1. Press the Menu & Mono start keys. Next press the up arrow key 4 times to make the machine enter the maintenance mode.

2. Enter 8 & 0 by using the up arrow key & SET keys.

3. Press the mono start key several times untill the purge count appears on the LCD.

4. Enter 2 7 8 & 3 by using the up arrow key & set keys to reset the purge count to zero.

5. Press the stop/exit key to return to the initial stage of the maintanance mode.

6. Enter 9 twice by using the up arrow & set key's to exit from maintenance mode
i hope it helps

Sep 18, 2013 | Brother DCPJ125 All-In-One Inkjet Printer

1 Answer

I have a telecommande URC-4605B01 I d ont now how to programme my tv is a toshiba tank you i am from canada i read more in french but it ok in englis tank you


Salut et bienvenue a fixya.

Je peut (peut-etre) t`aider avec ce probleme mais j`aurais quelque questions auparavant;

As tu le livre ou liste de codes disponible pour ton URC-4605 ?
Toshiba est une marque tres populaire et a peu pres toute les telecommandes universel peuvent les opere.
Sauf dans certain cas comme; si ta television est un modele combine dvd our vcr ?

Tu peut aussi faire une recherche de code, voici la procedure avec ton televiseur allume.

1. presse le bouton "tv"
2. presse le bouton "setup" et tiend le jusqu`a temp que la lumiere cligne 2 fois.
3. Pointe la telecommande envers la tv et alterne entre les boutons "power" et "tv" jusqu`a ce que la tele s`eteigne.
note: si tu vas trop vite tu peut depasser le code et tu auras a recommencer, tu doit aussi avoir de la patience car tu peut avoir a presser ces 2 boutons une cinquantaine de fois ou plus.

4.Quand la tele s`eteindra tu doit mettre le code en memoire en pressant le bouton "setup" a nouveau jusqu`a ce qu`il cligne deux fois.

J`espere que ca te sera utile .
Salut et ALP

Mar 20, 2011 | Televison & Video

1 Answer

How do i rectify error code h4-01?


first you have to enter simulation mode:
#/P key (program) ON ? Asterisk (*) key ON ? CLEAR key ON ?
Asterisk (*) key ON ? Ready for input of a main code of simulation
2) Entering a main code with the 10-key ? START key ON
3) Entering a sub code with the 10-key ? START key ON
4) Select an item with the scroll key and the item key.
5) The machine enters the mode corresponding to the selected item.
Press START key to start the simulation operation.

main code is 14, sub code is 0 in your case.

H4-01 means Sub heater lamp abnormally low temperature detection.

You may also have a dirty/defective thermistor in the fuser unit.

Oct 29, 2010 | Sharp AR-M237 Digital Copier

2 Answers

Am used panasonic copier pf 7818 asking for a password


go to service mode USER PRESET key 3 A3 original size keys are simultaneously pressed . then F1 will appear presse key 5 and print 42 to 0

Aug 27, 2010 | Panasonic FP-7735 Black and White Copier

2 Answers

Daughter touched keypad.


Go into control panal
than clic key board
go int0 properties

Apr 23, 2010 | Fujitsu AMILO PC Laptops

1 Answer

Reset users pin


Settings for the Administrator Mode 1 Call the Utility Mode to the Display. ❍ Calling the Utility Mode to the Display (p.7-1) 2 Making sure that ?U--? appears on the Display, enter ?5? from the 10- Key Pad. 3 Press the [Start] key. Input Account Procedure (A-2) 1 Call the Administrator Mode to the Display. ❍ Settings for the Administrator Mode (p.7-16) 2 Making sure that ?Ad-? appears on the Display, enter ?1? from the 10- Key Pad. 3 Press the [Start] key. 4 Making sure that ?A--? appears on the Display, enter ?2? from the 10- Key Pad. 5 Press the [Start] key. 6 Enter the 3-digit account number from the 10-Key Pad. ? Do you know the restrictions on entering the account number? ➜ The account number must be in three digits ranging from 001 to 999. ➜ If an account number entered already exists, the entry will be rejected. Enter a different number. 7 Press the [Start] key. This stores the account number. ✎ Tip To program another account number successively, repeat steps 4 through 7. Using the Utility Mode 7 Di152/Di183 7-21 Delete Account Procedure (A-3) 1 Call the Administrator Mode to the Display. ❍ Settings for the Administrator Mode (p.7-16) 2 Making sure that ?Ad-? appears on the Display, enter ?1? from the 10- Key Pad. 3 Press the [Start] key. 4 Making sure that ?A--? appears on the Display, enter ?3? from the 10- Key Pad. 5 Press the [Start] key. 6 Press [ ] or [ ] key to select the account number to be deleted. 7 Press the [Start] key. The selected account number will be deleted. ? Do you know what to do to delete another account number? ➜ Repeat steps 4 through 7. 7 Using the Utility Mode You can go to the Konicaminolta US web site and down load a operators manual for youself

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Apr 23, 2009 | Minolta Office Equipment & Supplies

1 Answer

Some letters like ( a;e,i,o,p ,y) ar nt working on the keybo


for people who activate them accidentally. If you decide you need to disable a key, just follow these easy steps:

1. From the Tools menu, select Customize…
2. In the
Customize dialog box, click Keyboard
3. The Customize Keyboard dialog box will open
4. In the scroll box beneath the Categories label, select All Commands
5. In the Commands scroll box, find the command name for the key or keystroke (you’ll have to do some searching to find the specific key you wish to disable, but here’s a freebie: to disable the Insert key, select overtype)
6. Highlight the key or key sequence in the box below the Current keys label
7. In the drop down box beside the label Save changes in: select Normal to apply the change to all documents created in Word. To disable the key only to the current document, select the document name from the list
8. Click Remove and then Close
9. Click Close on the Customize dialog box

Dec 18, 2008 | Gateway 2520915 Keyboard

Not finding what you are looking for?
Sharp AR-M237 Copier Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...