Question about KitchenAid Architect Series KEBC107KSS Electric Single Oven

Open Question

Kitchen aid wall mount electronic thermometer

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 572 Answers

SOURCE: I cleaned over with self clean and it blows the

if u have unproper vent specs on unit it will blow. read instellation spect for proper vent specs

Posted on Feb 12, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My convection oven ring does not work


These tend to crack and "unzip" because they are such a tight circle... Kill the power, and meter the ring element for ohm's resistance. If the element tests ok, check the wires to the element for overheating, and if those look fine, remove the control board and look for burnt solder joints where the relays are mounted. Multimeter DM10T

Feb 22, 2015 | KitchenAid Kitchen Aid KEBS177SBL Single...

1 Answer

Kitchen aid torsion spring


I looked up the parts break down for this model there are 7 different ones your last 2 digits are missing this unit dos not use torsion springs the MW door should have a brown arm riveted to the door that goes into the frame this activates a switch

Feb 18, 2015 | KitchenAid Kitchen Aid 30 In. Stainless...

1 Answer

Why the cooling fan does not work on one the upper over of KEBS278


First check that the fan itself has not failed. If the fan and wiring are ok, your EOC (electronic oven control) has failed. This is NLA (no longer availabe). The Whirlpool part number is 3187895. This can be rebuilt: See:
http://www.fixyourboard.com/boards/3187895.html

Aug 24, 2014 | KitchenAid Kitchen Aid KEBS277SWH Double...

1 Answer

Needd to change kitchen aid wall oven from celsius to fahrenheit


Press and hold the Broil Max Econo button for 5 seconds.
Only this button and without turning on oven.

Feb 17, 2013 | KitchenAid Kitchen Aid KEBS177SBL Single...

2 Answers

Kitchen aid wall oven Model YKEBS2780B1 SHOWS


Hello,4 Digit Failure Code F0 - E0 Analog to Digital Failure Disconnect for 30 seconds - if display re-appears - replace control F1 - E1 Safety flip flop Replace Electronic Range Control/Clock(ERC) F2 - E0 Shorted keypad Replace Electronic Range Control/Clock(ERC) F3 - E0 Oven temperature sensor or oven temperature sensor fuse opened Replace oven temperature sensor or fuse F3 - E1 Oven temperature sensor shorted Replace oven temperature sensor F3 - E2 Oven too hot Replace oven temperature sensor F3 - E3 Clean temp too hot Replace oven temperature sensor F5 - E0 F5 - E1 and E2 Check door/latch switch Replace component 2 Digit Failure Code F0 or F1 or F5 Failed transistor Replace Electronic Range Control/Clock(ERC) F2 - E0 Oven temp too high 1. Test operation of door lock on self-clean models
2. Test relay contact operation
3. High resistance in oven temperature sensor F3

Thanks

May 26, 2010 | Ovens

1 Answer

I cleaned over with self clean and it blows the thermostate. Is this normal on Kitchen aid wall mount ovens?


if u have unproper vent specs on unit it will blow. read instellation spect for proper vent specs

Feb 12, 2010 | KitchenAid Architect Series KEBC177KSS...

1 Answer

Will not come on after self cleaning


Hi,

this is a common occurance with many self clean ranges, especially slide in and wall oven units. the kitchen aid ranges usually have a non reset hi-limit. meaning it opens one time and needs to be replaced, sadly.

to replace the thermostat can be tricky to do if you're not experienced, so if you have any reservations about taking you range apart, call a qualified tech in your area. if you decide to take a go at it, well first things first.

**FIRST unplug from the wall or shut off the breaker**

*the other issue is not knowing what model you have.

I can tell you most recent kitchen aid units made by whirlpool have a fixed hi-limit at the back outer oven wall. remove the rear panel, and the hi-limit should be easily accessed. that part # 8300802

hope that helps,

good luck

Sep 28, 2009 | KitchenAid Ovens

Not finding what you are looking for?
KitchenAid Architect Series KEBC107KSS Electric Single Oven Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Ovens Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

jdthefixer

Level 3 Expert

746 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a KitchenAid Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...