Question about managemylife.com

1 Answer

What can be wrong with my washer my kenmore washer wont spin

Washer model 20022 stopped on spin cycle and wouldnt spin so i bailed all water out with jug and now i push start button and nonthing happens,no lights come on all i get is humming noise,can someone tell me what the problem is washer is 1 year and 1 month old

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Contributor
  • 28 Answers

I've posted on this subject before. Your washer will not cycle correctly if there are any restrictions in the pump and this usually means that during doing the wash things have been transferred from your clothes generally the pockets. ..These things usually get lodged in the pump. When the washer enters the spin cycle the pump kicks in and pumps out the excess water. If you can get the back off the washer you will see a semi - round object that is usually white with 2 hoses coming out of it. One hose is the water in let hose the other one is attached to the drain hose that goes into the sewer drain outside of the washer. Make sure that the washer is unplugged then remove the hose that goes to the outside drain. Now with a flashlight look inside of the pump and see if you can see any debris or foreign objects. If you see anything in there you will have to remove these things through the hole where the hose connects. After removing debris replace hose inspect the surrounding area for obvious reasons why the washer may have stopped like look to make sure that the belt on the drive motor is ok. With no other signs of problems replace the back of the washer andplug it back in and try to sstart the washer just like you were just starting a new load of laundry. G

Posted on May 25, 2014

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer will not complete cycle stops on spin and flashes on spin


no matter which make / model of washer you have you should clear the filter regularly; i do mine every 2 weeks , just in case....i learned this the hard way when the washer wouldnt finish cycle. there may be a bit of water in the system so be prepared for an amount of water

Oct 06, 2011 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

When I accidently push the start button when I mean to push the key button to open the door, the cycle will start again. Is there any way to stop it?


Push and hold down the start button again. The machine will stop. Turn to Spin (to drain the water that burped into the machine when you turned it on by accident). Hit start, let the drain and spin cycle complete. Hit the key button and you're all set.

Sep 24, 2011 | Asko W6021 Front Load Washer

1 Answer

I cant get my washer to spin when it rinses?


Now if the machine is still full of water I need you to bail out some of the water by hand with a pot or bucket.Bail out just enough so you can look under the machine to the front right.You should see a pump with a red or black fan attached to it.If you see this pump try turning the fan clockwise and anticlockwise a few times to loosen it just in case it is jammed.Then put it back on its feet and select a spin cycle and push start.Hopefully it starts to drain.Please reply to tell me how you got on or if you have the pump with no fan attached.

Jul 24, 2010 | Whirlpool CAM2752KQ Top Load Washer

1 Answer

Screeching noise after water starts going in


Hi just read your posting.Now put the machine to a spin cycle and push start,Does the noise happen in this cycle? If the noise doesn't happen then try a cold water fill but turn the hot tap off first.If the noise still doesn't happen then try a hot water fill but turn the cold water off first. This noise sounds like one of your water valves is faulty.Please reply with additional information on the questions and I am sure we can rectify this fault.

Jul 07, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Washer will not spin and will not drain water


Hi just read your posting Now if the machine is still full of water I need you to bail out some of the water by hand with a pot or bucket.Bail out just enough so you can look under the machine to the front right.You should see a pump with a red or black fan attached to it.If you see this pump try turning the fan clockwise and anticlockwise a few times to loosen it just in case it is jammed.Then put it back on its feet and select a spin cycle and push start.Hopefully it starts to drain.Please reply to tell me how you got on or if you have the pump with no fan attached.

Jun 30, 2010 | Fisher and Paykel IWL12 Top Load Washer

1 Answer

Washer is won't spin


Hi just read your posting.Now from the information in your posting the machine is not draining.Is this correct?Now what I need you to do is to 1st remove all the clothes from the machine and bail out the water by hand with a small pot or bucket.Only bail enough water so it does not leak out when you lean it back against the wall.Now I need you to look under the machine ,Hence the reason for bailing some of the water out, and tell if your pump is the type with a red or black fan attached to it.The pump is located under the machine to the front right.If you have this type of pump turn the fan with your hand clockwise a few times then anticlockwise a few times.This is to loosen it up if the pump is blocked.If the pump frees up and you can turn the fan easily then put the machine back upright and select a spin cycle and push the start button.Please reply and and tell me how you got on or if your pump is the one without the fan,also reply back if it does not drain and you require more help.

Jun 26, 2010 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

I also need the answer...


where is the lint trap located

Dec 06, 2007 | Washing Machines

Not finding what you are looking for?
managemylife.com Logo

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top managemylife.com Computers & Internet Experts

thinksewfast

Level 2 Expert

89 Answers

Brad Brown

Level 3 Expert

18139 Answers

Paul Bade

Level 3 Expert

1662 Answers

Are you a managemylife.com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...